All MIBs › A3COM-SWITCHING-SYSTEMS-FILTER-MIB › a3ComPortFilterPktProcessPath
a3ComPortFilterPktProcessPath
Module: A3COM-SWITCHING-SYSTEMS-FILTER-MIB
OID (symbolic): A3COM-SWITCHING-SYSTEMS-FILTER-MIB::a3ComPortFilterPktProcessPath
OID (numeric): 1.3.6.1.4.1.43.29.4.20.3.4.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The packet processing path to apply the filter. The value is a bit mask defined as follows:
Mask Value Path Description 0x1 Xmit All All frames xmitted to segment connected to the port
0x2 Xmit Multicast Multicast+broadcast frames xmitted to the segment connected to the port
0x4 Recv All All frame received by the port from the segment connected to the port
0x8 Recv Multicast Multicast+broadcast frames received by the port from the segement connected to the port. If mask value is set to 0x10, the packet filter will be loaded to both transmit multicast and receive multicast paths. Once a bridge filter program has been downloaded to a bridge port path, this object can be applied to change its value.
What is a3ComPortFilterPktProcessPath?
A bit mask integer controlling which traffic direction the filter applies to: transmit all (0x1), multicast/broadcast only (0x2), or receive all (0x4). Engineers combine these bits to filter incoming, outgoing, or broadcast traffic selectively. Example: 0x5 filters both all transmitted and all received frames.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.29.4.20.3.4.1.5 snmpwalk -v2c -c public <target> A3COM-SWITCHING-SYSTEMS-FILTER-MIB::a3ComPortFilterPktProcessPath
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.43.29.4.20.3.4.1.5.1 snmpget -v2c -c public <target> A3COM-SWITCHING-SYSTEMS-FILTER-MIB::a3ComPortFilterPktProcessPath.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.43.29.4.20.3.4.1.5.1 i <value>
Start monitoring 3Com SuperStack switches (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM-SWITCHING-SYSTEMS-FILTER-MIB::a3ComPortFilterPktProcessPath OID value, configure state conditions and alerts, and monitor any 3Com SuperStack switches (legacy) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.43 | a3Com | A3COM-AUDL-R1-MIB |
| 1.3.6.1.4.1.43.29 | switchingSystemsMibs | A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB |
| 1.3.6.1.4.1.43.29.4 | a3ComSwitchingSystemsMib | A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.43.29.4.20 | a3ComFilterGroup | A3COM-SWITCHING-SYSTEMS-FILTER-MIB |
| 1.3.6.1.4.1.43.29.4.20.3 | a3ComBridgeFilterGroup | A3COM-SWITCHING-SYSTEMS-FILTER-MIB |
| 1.3.6.1.4.1.43.29.4.20.3.4 | a3ComPortFilterTable | A3COM-SWITCHING-SYSTEMS-FILTER-MIB |
| 1.3.6.1.4.1.43.29.4.20.3.4.1 | a3ComPortFilterEntry | A3COM-SWITCHING-SYSTEMS-FILTER-MIB |
| 1.3.6.1.4.1.43.29.4.20.3.4.1.5 | a3ComPortFilterPktProcessPath | A3COM-SWITCHING-SYSTEMS-FILTER-MIB |