All MIBs › A3COM-SWITCHING-SYSTEMS-FILTER-MIB › a3ComFilterAddressStatus
a3ComFilterAddressStatus
Module: A3COM-SWITCHING-SYSTEMS-FILTER-MIB
OID (symbolic): A3COM-SWITCHING-SYSTEMS-FILTER-MIB::a3ComFilterAddressStatus
OID (numeric): 1.3.6.1.4.1.43.29.4.20.1.4.1.3
Node type: OBJECT-TYPE
Type: RowStatus
Access: read-write
Description: The status column for this address group entry. This OBJECT can be set to: createAndGo(4) destroy(6)
The following values may be read: active(1)
Setting this object to createAndGo(4) will result in the agent attempt to create and commit the row based on the contents of the objects in the row. If all the necessary information is presented in the row and the values are acceptible to the agent, the agent will change the status to active(1). If there are any necessary objects are not set, the agent will reject the creation request.
When the state of the row translates to active(1), the agent add the corresponding address to the specified address group.
Setting this object to destroy(6) will remove the corresponding address from the indicated address group.
What is a3ComFilterAddressStatus?
Reports the operational status of an address group entry as a RowStatus value (active, creating, or destroyed). Network engineers use this to manage the lifecycle of address filters, creating new filter rules or removing obsolete ones from the switch. Setting it to createAndGo(4) enables the filter; setting to destroy(6) removes it.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.43.29.4.20.1.4.1.3 snmpwalk -v2c -c public <target> A3COM-SWITCHING-SYSTEMS-FILTER-MIB::a3ComFilterAddressStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.43.29.4.20.1.4.1.3.1 snmpget -v2c -c public <target> A3COM-SWITCHING-SYSTEMS-FILTER-MIB::a3ComFilterAddressStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.43.29.4.20.1.4.1.3.1 s <value>
Start monitoring 3Com SuperStack switches (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the A3COM-SWITCHING-SYSTEMS-FILTER-MIB::a3ComFilterAddressStatus OID value, configure state conditions and alerts, and monitor any 3Com SuperStack switches (legacy) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.43 | a3Com | A3COM-AUDL-R1-MIB |
| 1.3.6.1.4.1.43.29 | switchingSystemsMibs | A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB |
| 1.3.6.1.4.1.43.29.4 | a3ComSwitchingSystemsMib | A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.43.29.4.20 | a3ComFilterGroup | A3COM-SWITCHING-SYSTEMS-FILTER-MIB |
| 1.3.6.1.4.1.43.29.4.20.1 | a3ComFilterAddressGroup | A3COM-SWITCHING-SYSTEMS-FILTER-MIB |
| 1.3.6.1.4.1.43.29.4.20.1.4 | a3ComFilterAddressTable | A3COM-SWITCHING-SYSTEMS-FILTER-MIB |
| 1.3.6.1.4.1.43.29.4.20.1.4.1 | a3ComFilterAddressEntry | A3COM-SWITCHING-SYSTEMS-FILTER-MIB |
| 1.3.6.1.4.1.43.29.4.20.1.4.1.3 | a3ComFilterAddressStatus | A3COM-SWITCHING-SYSTEMS-FILTER-MIB |