Description: 
It indicates the reloading sequence attribute of the image.

For devices which support dual image:

If the value is 'main(1)',the image will be the first image
in the next reloading procedure. If the value is 'backup(2)',
the image will be used if the main image fails. If the value
is 'secure(4)', the image will be used if the main image and
backup image both fail. If the value is 'none(3)',the image will
not be used in the next reloading procedure.

At the same time,you also can specify the main image by
h3cSysReloadImage in h3cSysReloadScheduleTable. If the
image is different from previous main image, the previous main image
will not be main image again. And the image table will update with
this variation. Vice versa, if you have defined the reload schedule,
and then you define a new main image through h3cSysImageType when you
are waiting the reload schedule to be executed, the real main image
will be the latest one.


It is strongly suggested to define the main image here, not by h3cSysReloadImage
in h3cSysReloadScheduleTable.

There are some rules for setting the value of h3cSysImageType:

a)When a new image file is defined as 'main' or 'backup' file,the h3cSysImageType
  of old 'main' or 'backup' file will automatically be 'none'.
b)It is forbidden to set 'none' attribute manually.
c)It is forbidden to set 'secure' attribute manually.
d)If 'main' image is set to 'backup', the file keeps 'main'. And vice versa.
  At this time, the file has 'main-backup' property.
e)If the secure image is set to 'main' or 'backup', the file has 'main-secure' or 'backup-secure'property.
f)If the secure image is set to 'main' and 'backup', the file has the 'main-backup-secure' property.
g)If the none image is set to 'main' or 'backup', the file has the 'main' or 'backup' property.

The following table describes whether it is ok to set to another state
directly from original state.

                +--------------+-----------+-------------+-------------+
                |   set to     | set to    |  set to     |   set to    |
                |              |           |             |             |
     original   |    'main'    | 'backup'  |  'none'     |  'secure'   |
     state      |              |           |             |             |
  --------------+--------------+-----------+-------------+-------------+
                |              |           |             |             |
     main       |     ---      |   yes     |   no        |   no        |
                |              |           |             |             |
                |              |           |             |             |
  --------------+--------------+-----------+-------------|-------------+
                |              |           |             |             |
     backup     |     yes      |   ---     |   no        |   no        |
                |              |           |             |             |
  --------------+--------------+-----------+-------------|-------------+
                |              |           |             |             |
                |              |           |             |             |
      none      |     yes      |   yes     |   ---       |   no        |
                |              |           |             |             |
  --------------+--------------+-----------+-------------+-------------+
                |              |           |             |             |
      secure    |     yes      |   yes     |   no        |   ---       |
                |              |           |             |             |
                |              |           |             |             |
  --------------+--------------+-----------+-------------+-------------+

If there is one main image in the system, one row of H3cSysReloadScheduleEntry
whose  h3cSysReloadImage is equal to the main image's h3cSysImageIndex will be
created automatically. But if any row is deleted, it will not be created
automatically in h3cSysReloadScheduleTable.




For the device which doesn't support dual image(main/backup):

Only 'main' and 'none' is supported and it only can be set from none to main.
When a new image file is defined as 'main' file,the h3cSysImageType of old 'main'
file will automatically be 'none'.