A3COM-HUAWEI-RPR-MIB

All MIBs › A3COM-HUAWEI-RPR-MIB

Organization: Huawei 3Com Technologies Co., Ltd.

Last Updated: 2005-03-16

Description: Extends IEEE-802DOT17-RPR-MIB with per-interface operational controls and packet-drop counters for Resilient Packet Ring interfaces on Huawei-3Com networking equipment

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is A3COM-HUAWEI-RPR-MIB?

A3COM-HUAWEI-RPR-MIB is a Huawei-3Com (H3C) private MIB that extends the standards-track IEEE-802DOT17-RPR-MIB with vendor-specific operational and topology data for Resilient Packet Ring (RPR) interfaces, which use two counter-rotating fiber rings (ringlet0/outer and ringlet1/inner) for self-healing metro transport. It exposes per-interface ring specification data in h3cRprMaxmumDefineTable (h3cRprMaxStationNumDefine, h3cRprMaxReservedRateDefine), and augments the standard topology table via h3cRprTopoImageXTable with h3cRprTopoImageXWestEdgeStatus/h3cRprTopoImageXEastEdgeStatus and h3cRprTopoImageXStationName, plus a packet-drop counters table added in v1.1. It is primarily useful for confirming ring integrity (edge status per span) and station-level RPR health rather than raw traffic counters alone, complementing the base IEEE RPR MIB it depends on. It is deployed on Huawei/H3C routers and switches acting as stations on an RPR ring in metro/enterprise transport networks, and administrators can download the A3COM-HUAWEI-RPR-MIB file to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in A3COM-HUAWEI-RPR-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Huawei/H3C routers and switches with RPR interface modules

Monitoring Examples

An operator polls h3cRprTopoImageXWestEdgeStatus and h3cRprTopoImageXEastEdgeStatus for each station in h3cRprTopoImageXTable to confirm both ring spans are intact, and checks h3cRprMaxReservedRateDefine against actual reserved bandwidth; a west or east edge status flipping to false indicates a ring break at that station, which combined with rising packet-drop counters would point to a fiber cut or misconfigured span.

What Can Be Monitored

RPR ring edge status per span (west/east)
maximum station number and reserved rate per ring
RPR station/topology image table entries
RPR packet-drop counters
ring service class (ClassA0/A1/B/C) parameters

Imported Objects

From A3COM-HUAWEI-OID-MIB

h3cCommon

OBJECT-IDENTITY

From IEEE-802DOT17-RPR-MIB

rprTopoImageEntry	OBJECT-TYPE
rprTopoImageInetAddress	OBJECT-TYPE
rprTopoImageMacAddress	OBJECT-TYPE

From IF-MIB

InterfaceIndex

From INET-ADDRESS-MIB

InetAddress

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-SMI

Counter64
Gauge32

From SNMPv2-TC

MacAddress
RowStatus
TruthValue

How to Use in IPNetwork Monitor

Example using h3cRprSrcMacCountReceivedFrames OID:

Select a Huawei/H3C RPR routers/switch as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type h3cRprSrcMacCountReceivedFrames into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. Frames received from a particular MAC address of source station. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
h3cRpr	1.3.6.1.4.1.43.45.1.10.2.60			This MIB manages RPR(Resilient Packet Ring)interfaces by providing an operational table which controls parameters of each RPR interface and reports alarm conditions. A RPR ring is composed of two fiber rings: Outer and Inner.
h3cRprObjects	1.3.6.1.4.1.43.45.1.10.2.60.1
h3cRprMaxmumDefine	1.3.6.1.4.1.43.45.1.10.2.60.1.1
h3cRprMaxmumDefineTable	1.3.6.1.4.1.43.45.1.10.2.60.1.1.1		not-accessible	This table contains the specs of RPR ring.
h3cRprMaxmumDefineEntry	1.3.6.1.4.1.43.45.1.10.2.60.1.1.1.1		not-accessible	The entry of RPR Maximum Table.
NUM h3cRprMaxMumIfIndex	1.3.6.1.4.1.43.45.1.10.2.60.1.1.1.1.1	InterfaceIndex	not-accessible	The ifIndex of this RPR interface.
INT h3cRprMaxStationNumDefine	1.3.6.1.4.1.43.45.1.10.2.60.1.1.1.1.2	INTEGER	read-only	Max station number supported by RPR ring.
G32 h3cRprMaxReservedRateDefine	1.3.6.1.4.1.43.45.1.10.2.60.1.1.1.1.3	Gauge32	read-only	Max reserved rate supported by each RPR ringlet. An estimate of the interface's current bandwidth in units of 1,000,000 bits per second. If this object reports a value of 'n' then the speed of the interface is somewhere in the range of 'n-500,000' to 'n+499,999'. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. For a sub-layer which has no concept of bandwidth, this object should be zero.
h3cRprTopoImage	1.3.6.1.4.1.43.45.1.10.2.60.1.2
h3cRprTopoImageXTable	1.3.6.1.4.1.43.45.1.10.2.60.1.2.1		not-accessible	This table contains additional objects for the rprTopoImageTable in IEEE-802DOT17-RPR-MIB.
h3cRprTopoImageXEntry	1.3.6.1.4.1.43.45.1.10.2.60.1.2.1.1		not-accessible	Each entry contains information specific to a particular station on the ring. The table has at least one entry for the station itself, this entry indicates zero hops on each ringlet.
T/F h3cRprTopoImageXWestEdgeStatus	1.3.6.1.4.1.43.45.1.10.2.60.1.2.1.1.3	TruthValue	read-only	The current edge status of the west span. If an edge exists,the h3cRprTopoImageXWestEdgeStatus is true. Otherwise, the h3cRprTopoImageXWestEdgeStatus is false.
T/F h3cRprTopoImageXEastEdgeStatus	1.3.6.1.4.1.43.45.1.10.2.60.1.2.1.1.4	TruthValue	read-only	The current edge status of the east span. If an edge exists, the h3cRprTopoImageXEastEdgeStatus is true. Otherwise, the h3cRprTopoImageXEastEdgeStatus is false.
STR h3cRprTopoImageXStationName	1.3.6.1.4.1.43.45.1.10.2.60.1.2.1.1.5	SnmpAdminString	read-write	The operator assigned station name. The operator can assigned it by h3cRprTopoImageXStationName.
h3cRprSpanCounters	1.3.6.1.4.1.43.45.1.10.2.60.1.3
h3cRprSrcMacCountTable	1.3.6.1.4.1.43.45.1.10.2.60.1.3.1		not-accessible	The RPR Source Mac Count Table contains the cumulative sum of frames and octects from the particular source station.
h3cRprSrcMacCountEntry	1.3.6.1.4.1.43.45.1.10.2.60.1.3.1.1		not-accessible	An entry in the RPR Source Mac Count Table.
NUM h3cRprSrcMacCountIfIndex	1.3.6.1.4.1.43.45.1.10.2.60.1.3.1.1.1	InterfaceIndex	not-accessible	The ifIndex of this RPR interface.
MAC h3cRprSrcMacCountBySrcAddress	1.3.6.1.4.1.43.45.1.10.2.60.1.3.1.1.2	MacAddress	not-accessible	MAC address of the source station where the frames come from.
C64 h3cRprSrcMacCountReceivedFramesEx	1.3.6.1.4.1.43.45.1.10.2.60.1.3.1.1.3	Counter64	read-only	Frames received from a particular MAC address of source station.
C64 h3cRprSrcMacCountReceivedOctets	1.3.6.1.4.1.43.45.1.10.2.60.1.3.1.1.4	Counter64	read-only	Octets received from a particular MAC address of source station.
h3cRprDestMacCountTable	1.3.6.1.4.1.43.45.1.10.2.60.1.3.2		not-accessible	The RPR Destination MAC Count Table contains the cumulative sum of frames and octects to the particular destination station.
h3cRprDestMacCountEntry	1.3.6.1.4.1.43.45.1.10.2.60.1.3.2.1		not-accessible	An entry in the RPR MAC Destination Count Table.
NUM h3cRprDestMacCountIfIndex	1.3.6.1.4.1.43.45.1.10.2.60.1.3.2.1.1	InterfaceIndex	not-accessible	The ifIndex of RPR interface.
MAC h3cRprDestMacCountByDestAddress	1.3.6.1.4.1.43.45.1.10.2.60.1.3.2.1.2	MacAddress	not-accessible	MAC address of the destination station where the frames are sent to.
C64 h3cRprDestMacCountReceivedFrames	1.3.6.1.4.1.43.45.1.10.2.60.1.3.2.1.3	Counter64	read-only	Frames sent to a particular MAC address of destination station.
C64 h3cRprDestMacCountReceivedOctets	1.3.6.1.4.1.43.45.1.10.2.60.1.3.2.1.4	Counter64	read-only	Octets sent to a particular MAC address of destination station.
h3cRprPktDropCountTable	1.3.6.1.4.1.43.45.1.10.2.60.1.3.3		not-accessible	The RPR Packet Drop Count Table contains the cumulative sum of packets dropped for congestion.
h3cRprPktDropCountEntry	1.3.6.1.4.1.43.45.1.10.2.60.1.3.3.1		not-accessible	An entry in the RPR Packet Drop Count Table.
NUM h3cRprPktDropCntIfIndex	1.3.6.1.4.1.43.45.1.10.2.60.1.3.3.1.1	InterfaceIndex	not-accessible	The ifIndex of this RPR interface.
H3C h3cRprPktDropCntRingletID	1.3.6.1.4.1.43.45.1.10.2.60.1.3.3.1.2	H3cRprRingletID	not-accessible	The RPR Ringlet of the station through which the packets transmit.
C64 h3cRprDownFlowClassAPktDrops	1.3.6.1.4.1.43.45.1.10.2.60.1.3.3.1.3	Counter64	read-only	The total dropped number of Class A packets which transmit down from the host.
C64 h3cRprUpFlowClassAPktDrops	1.3.6.1.4.1.43.45.1.10.2.60.1.3.3.1.4	Counter64	read-only	The total dropped number of Class A packets which transmit up to the host.
C64 h3cRprDownFlowClassBPktDrops	1.3.6.1.4.1.43.45.1.10.2.60.1.3.3.1.5	Counter64	read-only	The total dropped number of Class B packets which transmit down from the host.
C64 h3cRprUpFlowClassBPktDrops	1.3.6.1.4.1.43.45.1.10.2.60.1.3.3.1.6	Counter64	read-only	The total dropped number of Class B packets which transmit up to the host.
C64 h3cRprDownFlowClassCPktDrops	1.3.6.1.4.1.43.45.1.10.2.60.1.3.3.1.7	Counter64	read-only	The total dropped number of Class C packets which transmit down from the host.
C64 h3cRprUpFlowClassCPktDrops	1.3.6.1.4.1.43.45.1.10.2.60.1.3.3.1.8	Counter64	read-only	The total dropped number of Class C packets which transmit up to the host.
h3cRprRS	1.3.6.1.4.1.43.45.1.10.2.60.1.4
h3cRprStaticRSTable	1.3.6.1.4.1.43.45.1.10.2.60.1.4.1		not-accessible	The RPR Static Ring Selection table contains the static ring selection information by the way of configuration.
h3cRprStaticRSEntry	1.3.6.1.4.1.43.45.1.10.2.60.1.4.1.1		not-accessible	An entry in the RPR Static Ring Selection table.
NUM h3cRprStaticRSIfIndex	1.3.6.1.4.1.43.45.1.10.2.60.1.4.1.1.1	InterfaceIndex	not-accessible	The ifIndex of RPR interface.
MAC h3cRprStaticRSMacAddress	1.3.6.1.4.1.43.45.1.10.2.60.1.4.1.1.2	MacAddress	not-accessible	The MAC address of the station on the ring.
H3C h3cRprStaticRSRingletID	1.3.6.1.4.1.43.45.1.10.2.60.1.4.1.1.3	H3cRprRingletID	read-create	The identifier of the ring which frames are sent from one station to another. Ringlet0 refers to outer ring, while ringlet1 does inner.
INT h3cRprStaticRSTtl	1.3.6.1.4.1.43.45.1.10.2.60.1.4.1.1.4	INTEGER	read-only	The hops from source station to destination station by the selected ringlet.
T/F h3cRprStaticRSValid	1.3.6.1.4.1.43.45.1.10.2.60.1.4.1.1.5	TruthValue	read-only	The flag identify whether the configed ringlet is valid. If it is true, the configed ringlet is valid, otherwise it's invalid.
ROW h3cRprStaticRSRowStatus	1.3.6.1.4.1.43.45.1.10.2.60.1.4.1.1.6	RowStatus	read-create	The status of this table entry. The status includes createAndGo, active and destroy.
h3cRprIpv4DynamicRSTable	1.3.6.1.4.1.43.45.1.10.2.60.1.4.2		not-accessible	The RPR Ipv4Dynamic Ring Selection Table that contains the dynamic ring selection information by shortest path.
h3cRprIpv4DynamicRSEntry	1.3.6.1.4.1.43.45.1.10.2.60.1.4.2.1		not-accessible	An entry in the RPR Ipv4Dynamic Ring Selection Table.
NUM h3cRprIpv4DynamicRSIfIndex	1.3.6.1.4.1.43.45.1.10.2.60.1.4.2.1.1	InterfaceIndex	not-accessible	The ifIndex of RPR interface.
MAC h3cRprIpv4DynamicRSMacAddress	1.3.6.1.4.1.43.45.1.10.2.60.1.4.2.1.2	MacAddress	not-accessible	The Ipv4 MAC address of destination station on the ring.
H3C h3cRprIpv4DynamicRSRingletID	1.3.6.1.4.1.43.45.1.10.2.60.1.4.2.1.3	H3cRprRingletID	read-only	The identifier of the ring which frames are sent from the source station to the destination station.
INT h3cRprIpv4DynamicRSTtl	1.3.6.1.4.1.43.45.1.10.2.60.1.4.2.1.4	INTEGER	read-only	The hops from source station to destination station by the selected ringlet.
h3cRprIpv6DynamicRSTable	1.3.6.1.4.1.43.45.1.10.2.60.1.4.3		not-accessible	The RPR Ipv6 Dynamic Ring Selection Table that contains the Ipv6 ring selection information by dynamic ring selection and static ring selection.
h3cRprIpv6DynamicRSEntry	1.3.6.1.4.1.43.45.1.10.2.60.1.4.3.1		not-accessible	An entry in the RPR Ipv6 Ring Selection Table.
NUM h3cRprIpv6DynamicRSIfIndex	1.3.6.1.4.1.43.45.1.10.2.60.1.4.3.1.1	InterfaceIndex	not-accessible	The ifIndex of RPR interface.
MAC h3cRprIpv6DynamicRSMacAddress	1.3.6.1.4.1.43.45.1.10.2.60.1.4.3.1.2	MacAddress	not-accessible	The Ipv6 MAC address of the destination station on the ring.
H3C h3cRprIpv6DynamicRSRingletID	1.3.6.1.4.1.43.45.1.10.2.60.1.4.3.1.3	H3cRprRingletID	read-only	The identifier of the ring which frames are sent from the source station to the destination station.
INT h3cRprIpv6DynamicRSTtl	1.3.6.1.4.1.43.45.1.10.2.60.1.4.3.1.4	INTEGER	read-only	The hops from source station to destination station by selected ringlet.
h3cRprIpv4OverallRSTable	1.3.6.1.4.1.43.45.1.10.2.60.1.4.4		not-accessible	The RPR Ipv4 Overall Ring Selection Table that contains the overall and active ring selection infomation by dynamic ring selection and static ring selection.
h3cRprIpv4OverallRSEntry	1.3.6.1.4.1.43.45.1.10.2.60.1.4.4.1		not-accessible	An entry in the RPR Overall Ring Selection Table.
NUM h3cRprIpv4OverallRSIfIndex	1.3.6.1.4.1.43.45.1.10.2.60.1.4.4.1.1	InterfaceIndex	not-accessible	The ifIndex of RPR interface.
MAC h3cRprIpv4OverallRSMacAddress	1.3.6.1.4.1.43.45.1.10.2.60.1.4.4.1.2	MacAddress	not-accessible	The MAC address of the destination station on the ring.
INT h3cRprIpv4OverallRSType	1.3.6.1.4.1.43.45.1.10.2.60.1.4.4.1.3	INTEGER	read-only	The ring selection item type indicates static or dynamic.
H3C h3cRprIpv4OverallRSRingletID	1.3.6.1.4.1.43.45.1.10.2.60.1.4.4.1.4	H3cRprRingletID	read-only	The identifier of the ring which frames are sent from the source station to the destination station.
INT h3cRprIpv4OverallRSTtl	1.3.6.1.4.1.43.45.1.10.2.60.1.4.4.1.5	INTEGER	read-only	The hops from source station to destination station by selected ringlet.
h3cRprVrrpRSTable	1.3.6.1.4.1.43.45.1.10.2.60.1.4.5		not-accessible	The RPR VRRP Ring Selection Table that contains the ring selection information when the vrrp group is configured.
h3cRprVrrpRSEntry	1.3.6.1.4.1.43.45.1.10.2.60.1.4.5.1		not-accessible	An entry in the RPR VRRP Ring Selection Table.
NUM h3cRprVrrpRSIfIndex	1.3.6.1.4.1.43.45.1.10.2.60.1.4.5.1.1	InterfaceIndex	not-accessible	The ifIndex of RPR interface.
MAC h3cRprVrrpRSVirtualMacAddress	1.3.6.1.4.1.43.45.1.10.2.60.1.4.5.1.2	MacAddress	not-accessible	The virtual MAC address of the staion in VRRP group.
MAC h3cRprVrrpRSMacAddress	1.3.6.1.4.1.43.45.1.10.2.60.1.4.5.1.3	MacAddress	read-only	The MAC address of the station that is the master in VRRP group.
H3C h3cRprVrrpRSRingletID	1.3.6.1.4.1.43.45.1.10.2.60.1.4.5.1.4	H3cRprRingletID	read-only	The identifier of the ring which frames are sent from the source station to the destination station.
INT h3cRprVrrpRSTtl	1.3.6.1.4.1.43.45.1.10.2.60.1.4.5.1.5	INTEGER	read-only	The hops from source station to destination station by selected ringlet.
h3cRprDefaultRingIDTable	1.3.6.1.4.1.43.45.1.10.2.60.1.4.6		not-accessible	The RPR Default RingID Table specify the default ringID.
h3cRprDefaultRingIDEntry	1.3.6.1.4.1.43.45.1.10.2.60.1.4.6.1		not-accessible	An entry in the RPR Default RingID Table.
NUM h3cRprDefaultRingIDIfIndex	1.3.6.1.4.1.43.45.1.10.2.60.1.4.6.1.1	InterfaceIndex	not-accessible	The ifIndex of RPR interface.
H3C h3cRprDefaultConfigRingletID	1.3.6.1.4.1.43.45.1.10.2.60.1.4.6.1.2	H3cRprRingletID	read-write	The default identifier of the ring configured by user.
H3C h3cRprDefaultActiveRingID	1.3.6.1.4.1.43.45.1.10.2.60.1.4.6.1.3	H3cRprRingletID	read-only	The identifier of the default ring which is active currently. The default ring configured by user may be inactive.
h3cRprDefect	1.3.6.1.4.1.43.45.1.10.2.60.1.5
h3cRprDefectReportTable	1.3.6.1.4.1.43.45.1.10.2.60.1.5.1		not-accessible	The RPR Defect Report Table that contains the trap information on the ring.
h3cRprDefectReportEntry	1.3.6.1.4.1.43.45.1.10.2.60.1.5.1.1		not-accessible	An entry in the RPR Defect Report Table.
NUM h3cRprDefectIfIndex	1.3.6.1.4.1.43.45.1.10.2.60.1.5.1.1.1	InterfaceIndex	not-accessible	The ifIndex of RPR interface.
BIT h3cRprDefectCurrentStatus	1.3.6.1.4.1.43.45.1.10.2.60.1.5.1.1.2	Bits	read-only	Indicates the current status of RPR ring. This attribute is used to notify the management system that alarms generate or clear about some RPR ring.
h3cRprPriorityMap	1.3.6.1.4.1.43.45.1.10.2.60.1.6
h3cRprPriority2ClassMapTable	1.3.6.1.4.1.43.45.1.10.2.60.1.6.1		not-accessible	The Table is for Class Of Service and RPR Service Class Mapping.
h3cRprPriority2ClassMapEntry	1.3.6.1.4.1.43.45.1.10.2.60.1.6.1.1		not-accessible	An entry in the COS to Service Class Map Table.
NUM h3cRprPriority2ClassMapIfIndex	1.3.6.1.4.1.43.45.1.10.2.60.1.6.1.1.1	InterfaceIndex	not-accessible	The ifIndex of RPR interface.
INT h3cRprPriority2ClassMapType	1.3.6.1.4.1.43.45.1.10.2.60.1.6.1.1.2	INTEGER	not-accessible	The type of Priority,include tag, mpls, ip.
INT h3cRprPriorityValue	1.3.6.1.4.1.43.45.1.10.2.60.1.6.1.1.3	INTEGER	not-accessible	The priority of tag,mpls and ip, the value range is 0~7.
H3C h3cRprPriority2ClassMap	1.3.6.1.4.1.43.45.1.10.2.60.1.6.1.1.4	H3cRprServiceClass	read-write	The RPR service class.
h3cRprRateLimitConfig	1.3.6.1.4.1.43.45.1.10.2.60.1.7
h3cRprRateLimitConfigTable	1.3.6.1.4.1.43.45.1.10.2.60.1.7.1		not-accessible	The RPR Rate Limit Configuration Table that contains the rate limit infomation of RPR serviec class.
h3cRprRateLimitConfigEntry	1.3.6.1.4.1.43.45.1.10.2.60.1.7.1.1		not-accessible	An entry in the RPR Rate Limit Configuration Table.
NUM h3cRprRateLimitConfigIfIndex	1.3.6.1.4.1.43.45.1.10.2.60.1.7.1.1.1	InterfaceIndex	not-accessible	The ifIndex of RPR interface.
H3C h3cRprRateLimitConfigRingletId	1.3.6.1.4.1.43.45.1.10.2.60.1.7.1.1.2	H3cRprRingletID	not-accessible	The identifier of the ring of RPR ringlet.
H3C h3cRprRateLimitConfigServiceClass	1.3.6.1.4.1.43.45.1.10.2.60.1.7.1.1.3	H3cRprServiceClass	not-accessible	The RPR service class.
I32 h3cRprRateLimitConfigValue	1.3.6.1.4.1.43.45.1.10.2.60.1.7.1.1.4	Integer32	read-write	The value of rate-limit that configured for diffrent service class. The unit is permillage.
h3cRprMacAddrLearn	1.3.6.1.4.1.43.45.1.10.2.60.1.8
h3cRprMacLearnCfgTable	1.3.6.1.4.1.43.45.1.10.2.60.1.8.1		not-accessible	The RPR MAC Address Table.
h3cRprMacLearnCfgEntry	1.3.6.1.4.1.43.45.1.10.2.60.1.8.1.1		not-accessible	The entry of RPR MAC Address Table.
NUM h3cRprMacLearnIfIndex	1.3.6.1.4.1.43.45.1.10.2.60.1.8.1.1.1	InterfaceIndex	not-accessible	The ifIndex of RPR interface.
MAC h3cRprMacLearnRprMac	1.3.6.1.4.1.43.45.1.10.2.60.1.8.1.1.2	MacAddress	not-accessible	The MAC address of the RPR station.
INT h3cRprMacLearnType	1.3.6.1.4.1.43.45.1.10.2.60.1.8.1.1.3	INTEGER	read-create	The type of MAC address item that the user built. The type includes static and dynamic.
MAC h3cRprMacLearnDestMac	1.3.6.1.4.1.43.45.1.10.2.60.1.8.1.1.4	MacAddress	read-create	The destination of MAC address.
I32 h3cRprMacLearnVlanId	1.3.6.1.4.1.43.45.1.10.2.60.1.8.1.1.5	Integer32	read-create	The vlan ID that the MAC address learned from by RPR staion.
H3C h3cRprMacLearnRinglet	1.3.6.1.4.1.43.45.1.10.2.60.1.8.1.1.6	H3cRprRingletID	read-create	The identifier of the ring which frames are sent from the source station to the destination station.
INT h3cRprMacLearnTtl	1.3.6.1.4.1.43.45.1.10.2.60.1.8.1.1.7	INTEGER	read-only	The hops from source station to destination station on the selected ringlet.
T/F h3cRprMacLearnIsValid	1.3.6.1.4.1.43.45.1.10.2.60.1.8.1.1.8	TruthValue	read-only	The flag identify whether the configured mac address is valid. If it is true, the configured mac address is valid, otherwise it's invalid.
ROW h3cRprMacLearnRowStatus	1.3.6.1.4.1.43.45.1.10.2.60.1.8.1.1.9	RowStatus	read-create	The status of this table entry. The status includes createAndGo, active and destroy.
h3cRprTrapVar	1.3.6.1.4.1.43.45.1.10.2.60.1.9
h3cRprTrapVarTable	1.3.6.1.4.1.43.45.1.10.2.60.1.9.1		not-accessible	The RPR Defect Report Table that contains varible that used to bind in trap.
h3cRprTrapVarEntry	1.3.6.1.4.1.43.45.1.10.2.60.1.9.1.1		not-accessible	An entry in the RPR Trap Var Table.
NUM h3cRprTrapIfIndex	1.3.6.1.4.1.43.45.1.10.2.60.1.9.1.1.1	InterfaceIndex	accessible-for-notify	The ifIndex of RPR interface. It is only used for trap to bind.
H3C h3cRprTrapRinglet	1.3.6.1.4.1.43.45.1.10.2.60.1.9.1.1.2	H3cRprRingletID	accessible-for-notify	The span of RPR station. It is only used for trap to bind.
MAC h3cRprTrapTopoMacAddress	1.3.6.1.4.1.43.45.1.10.2.60.1.9.1.1.3	MacAddress	accessible-for-notify	The MAC address of RPR station. It is only used for trap to bind.
IP h3cRprTrapIpAddress	1.3.6.1.4.1.43.45.1.10.2.60.1.9.1.1.4	InetAddress	accessible-for-notify	The IP address of RPR station. It is only used for trap to bind.
h3cRprTrap	1.3.6.1.4.1.43.45.1.10.2.60.1.10
NTF h3cRprTopologyOpenRing	1.3.6.1.4.1.43.45.1.10.2.60.1.10.1			The topology openRing trap indicates that the RPR ring is opened.
NTF h3cRprTopologyCloseRing	1.3.6.1.4.1.43.45.1.10.2.60.1.10.2			The topology openRing trap indicates that the RPR ring is closed.
NTF h3cRprTopologyInconsistent	1.3.6.1.4.1.43.45.1.10.2.60.1.10.3			The topology inconsistent trap indicates that the topology of RPR is inconsistent.
NTF h3cRprTopologyInstability	1.3.6.1.4.1.43.45.1.10.2.60.1.10.4			The topology instability trap indicates that the topology of RPR is instability.
NTF h3cRprDuplicateMacAddress	1.3.6.1.4.1.43.45.1.10.2.60.1.10.5			The duplicate MAC address trap indicates that the mac address of the station on the ring is dulplicate. That means there is the same MAC address between two stations on the ring.
NTF h3cRprDulplicateIPAddress	1.3.6.1.4.1.43.45.1.10.2.60.1.10.6			The dulplicate IP address trap indicates that the IP address of the station on the ring is dulplicate. That means there is the same IP address between two stations on the ring.
NTF h3cRprIncompleteLRTT	1.3.6.1.4.1.43.45.1.10.2.60.1.10.7			The incomplete LRTT trap indicates that LRTT is not completed.
NTF h3cRprProtecConfigInconsistent	1.3.6.1.4.1.43.45.1.10.2.60.1.10.8			The protection configuration inconsistent trap indicates that the configuration of protection mode on the ring is inconsistent. That is one station is configured steer mode while the other is configured wrap mode.
NTF h3cRprJumboConfigInconsistent	1.3.6.1.4.1.43.45.1.10.2.60.1.10.9			The jumbo configuration inconsistent trap indicates that the configuration of jumbo mode on the ring is inconsistent. That is one station supports jumbo frame while the other doesn't support jumbo frame.
NTF h3cRprExceedMaxReservRate	1.3.6.1.4.1.43.45.1.10.2.60.1.10.10			The exceeded max reserved rate trap indicates that the rate on the ringlet exceeded the max reserved rate. The operator can configure reserved rate for every station, but the sum of all stations' reserved rate of each RPR ringlet can't exceed maximum.
NTF h3cRprExceedMaxStationNum	1.3.6.1.4.1.43.45.1.10.2.60.1.10.11			The exceeded max station number trap indicates that the number of the stations on the ring exceeded the max station number.
NTF h3cRprMiscabling	1.3.6.1.4.1.43.45.1.10.2.60.1.10.12			The miscabling trap indicates that the miscabling event occurred.
NTF h3cRprBackPressure	1.3.6.1.4.1.43.45.1.10.2.60.1.10.13			The back pressure trap indicates that the backpressure is generated on the ringlet. That is the data flow on the ringlet exceeded the range of rate-limit configured.
NTF h3cRprBackPressureOver	1.3.6.1.4.1.43.45.1.10.2.60.1.10.14			The back pressure over trap indicates that the backpressure is disappeared on the ringlet.

RFC description

RPR (Resilient Packet Ring) management including interface parameters and alarm conditions.

Start monitoring Huawei/H3C RPR routers/switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download A3COM-HUAWEI-RPR-MIB