13 modules from QCI
QCI (Quanta Computer/QCT) MIBs here are for its white-box data-center switches rather than any consumer or enterprise-branded line, and several modules exist specifically to support data-center-bridging features: 802.1Qbb Priority Flow Control, BGP peering, and auto-VoIP CoS assignment sit alongside more security-oriented modules for 802.1X/RADIUS authentication, DHCP client state, DoS detection, and outbound SSH/Telnet session control. Come here if you manage Quanta/QCT white-box switches in a data-center fabric and need PFC, BGP, or the vendor's private DoS/auth extensions rather than generic interface counters. Module names carry no single shared QCI- prefix - watch for QUANTA-, or feature-named modules like PFC-MIB and DOT1X-AUTHENTICATION-SERVER-MIB - so check the module's own description to confirm it targets Quanta hardware specifically.
| Module | Description |
|---|---|
| DENIALOFSERVICE-PRIVATE-MIB | Manages denial-of-service attack detection thresholds and mitigation response statistics. |
| DHCPCLIENT-PRIVATE-MIB | Private MIB for DHCP client configuration and monitoring including lease state, assigned addresses, and renewal timers. |
| DOT1X-AUTHENTICATION-SERVER-MIB | Manages 802.1X authentication server configuration and RADIUS server settings for port-based access control. |
| IPV6-LOOPBACK-MIB | QCI IPv6 loopback interface MIB providing SNMP objects for managing IPv6 loopback address configuration and status. |
| IPV6-TUNNEL-MIB | QCI IPv6 tunnel MIB providing SNMP objects for managing IPv6-in-IPv4 tunnel interfaces and transition mechanism parameters. |
| KEYING-PRIVATE-MIB | QCI private MIB defining proprietary objects for keying and access control management on QCI network or security equipment. |
| LOOPBACK-MIB | QCI MIB providing loopback test configuration and results objects for testing interface connectivity and signal integrity. |
| OUTBOUNDSSH-PRIVATE-MIB | Manages outbound SSH session initiation and connection parameters on Quanta (QCI) network switches. |
| OUTBOUNDTELNET-PRIVATE-MIB | Manages outbound Telnet session initiation and connection parameters on Quanta (QCI) network switches. |
| PFC-MIB | Manages IEEE 802.1Qbb Priority Flow Control (PFC) per-priority pause configuration and pause-frame counters on DCB Ethernet ports. |
| QOS-AUTOVOIP-MIB | Manages Quanta QCI switch auto-VoIP QoS configuration for automatic voice traffic detection and priority assignment. |
| QUANTA-BGP-MIB | Manages Quanta QCI white-box switch BGP routing protocol configuration, peer sessions, and route advertisement. |
| TIMEZONE-PRIVATE-MIB | Manages QCI private time zone offset configuration for network element clock settings. |