All MIBs › ZYXEL-STATIC-ROUTE-MIB
Organization: Enterprise Solution ZyXEL
Last Updated: 2012-07-01
Category: ZyXEL Routing and IP Services
Description:
Manages ZyXEL IPv4 static routing table entries for manually configured network path definitions.
Imported Objects
From SNMPv2-SMI
| IpAddress | |
| MODULE-IDENTITY | |
| OBJECT-TYPE |
From SNMPv2-TC
| DisplayString | |
| RowStatus |
From ZYXEL-ES-SMI
| esMgmt | OBJECT-IDENTITY |
What Is ZYXEL-STATIC-ROUTE-MIB?
ZYXEL-STATIC-ROUTE-MIB is a ZyXEL Communications private enterprise MIB, sitting under the esMgmt subtree, that manages manually configured IPv4 static routes on ZyXEL switches and routers. Its core structure is the zyxelStaticRouteTable, indexed by destination address, subnet mask, and gateway, with row objects zyStaticRouteName (a short descriptive label), zyStaticRouteMetric (hop-count cost, 1-15), and zyStaticRouteRowStatus for creating and deleting entries via SNMP. zyStaticRouteMaxNumberOfRoutes reports the platform's maximum supported static route count, a useful capacity-planning check. Because it only covers manual routes rather than dynamic protocols, it is deployed alongside ZyXEL's standard routing/interface MIBs on managed switches where administrators need SNMP-based control of fallback or override paths, and administrators can download the ZYXEL-STATIC-ROUTE-MIB file to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in ZYXEL-STATIC-ROUTE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
What Can Be Monitored
- static route table entries (destination, mask, gateway)
- route metric/cost values
- route row status (active/inactive)
- maximum supported static route count
- route naming/identification labels
Supported Devices
- ZyXEL switches and routers (ZyXEL Communications enterprise MIB line)
Monitoring Examples
An operator walks zyxelStaticRouteTable and checks zyStaticRouteRowStatus for a route to a remote subnet; if the row shows notInService or is missing entirely while zyStaticRouteMaxNumberOfRoutes indicates free capacity, it signals the static route was never activated or was silently removed, which explains traffic falling back to the default gateway.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| zyxelStaticRoute | 1.3.6.1.4.1.890.1.15.3.77 | The subtree for static route | ||
| zyxelStaticRouteSetup | 1.3.6.1.4.1.890.1.15.3.77.1 | |||
| INT zyStaticRouteMaxNumberOfRoutes | 1.3.6.1.4.1.890.1.15.3.77.1.1 | INTEGER | read-only | The maximum number of static route entries that can be created. |
| zyxelStaticRouteTable | 1.3.6.1.4.1.890.1.15.3.77.1.2 | not-accessible | The table cantains static route configuration. | |
| zyxelStaticRouteEntry | 1.3.6.1.4.1.890.1.15.3.77.1.2.1 | not-accessible | An entry contains static route configuration. | |
| STR zyStaticRouteName | 1.3.6.1.4.1.890.1.15.3.77.1.2.1.1 | DisplayString | read-write | A descriptive name (up to 10 printable ASCII characters) for identification purposes. |
| IP zyStaticRouteIpAddress | 1.3.6.1.4.1.890.1.15.3.77.1.2.1.2 | IpAddress | not-accessible | This parameter specifies the IP network address of the final destination. Routing is always based on network number. If you need to specify a route to a single host, use a subnet mask of 255.255.255.255 in the subnet mask field to force the network number to be identical to the host ID. |
| IP zyStaticRouteSubnetMask | 1.3.6.1.4.1.890.1.15.3.77.1.2.1.3 | IpAddress | not-accessible | The subnet mask of an IP routing domain that is associated to a static route. |
| IP zyStaticRouteGateway | 1.3.6.1.4.1.890.1.15.3.77.1.2.1.4 | IpAddress | not-accessible | The IP address of gateway. The gateway is an immediate neighbor of your Switch that will forward the packet to the destination. The gateway must be a router on the same segment as your Switch. |
| INT zyStaticRouteMetric | 1.3.6.1.4.1.890.1.15.3.77.1.2.1.5 | INTEGER | read-write | The metric represents the cost of transmission for routing purposes. IP routing uses hop count as the measurement of cost, with a minimum of 1 for directly connected networks. Enter a number that approximates the cost for this link. The number need not be precise, but it must be between 1 and 15. In practice, 2 or 3 is usually a good number. |
| ROW zyStaticRouteRowStatus | 1.3.6.1.4.1.890.1.15.3.77.1.2.1.6 | RowStatus | read-create | This object allows entries to be created and deleted from the static route table. |
RFC description
Configures static routing tables for ZyXEL Enterprise Solution switches and devices.
Start monitoring ZyXEL switches and routers (ZyXEL Communications enterprise MIB line) (static-route destination/gateway/metric config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.