ZYXEL-OSPF-MIB

All MIBs › ZYXEL-OSPF-MIB

Organization: Enterprise Solution ZyXEL

Last Updated: 2012-07-01

Category: ZyXEL Routing and IP Services

Description:

Manages ZyXEL OSPF routing protocol configuration including areas, interfaces, neighbors, and LSA parameters.

Imported Objects

ospfAddressLessIf
ospfAreaId	OBJECT-TYPE
ospfIfIpAddress
ospfLsdbAreaId
ospfLsdbLsid
ospfLsdbRouterId
ospfLsdbType
ospfNbrAddressLessIndex
ospfNbrIpAddr
ospfVirtIfAreaId
ospfVirtIfNeighbor

From P-BRIDGE-MIB

EnabledStatus

From SNMPv2-SMI

IpAddress
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString
RowStatus

From ZYXEL-ES-SMI

esMgmt

OBJECT-IDENTITY

What Is ZYXEL-OSPF-MIB?

This is a vendor-specific MIB from ZyXEL layered over the standard OSPF routing protocol, intended to manage OSPF areas, interfaces, neighbor adjacencies, and link-state advertisement (LSA) parameters on ZyXEL routers/switches. Because no sample objects were available for this batch, its precise object names cannot be confirmed, but based on its description it exposes OSPF configuration and adjacency-state data analogous to the standard OSPF-MIB. Its monitoring relevance is primarily to routing protocol health and software configuration status: it would let an admin track OSPF neighbor state (full, init, down), area configuration, and LSA counts, which reveal routing adjacency flaps or misconfigured areas affecting network reachability. It is explicitly dependent on the OSPF protocol standard (RFC 2328) and likely mirrors or extends the IETF OSPF-MIB (RFC 1850/4750) with ZyXEL-specific additions. It is deployed on ZyXEL routers and Layer 3 switches running OSPF in enterprise or SMB network environments, where ZYXEL-OSPF-MIB SNMP monitoring tracks neighbor adjacency and area state.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZYXEL-OSPF-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ZyXEL router or Layer 3 switch running OSPF

Monitoring Examples

No sample objects were provided for this MIB, so a concrete polling scenario cannot be grounded in real object names; in general terms an admin would be expected to monitor OSPF neighbor adjacency state and area/interface parameters to detect routing flaps, but the specific ZyXEL object identifiers are not available here.

OIDs

OID symbolic	OID numeric	Type	Access	Description
STR zyOspfAreaName	1.3.6.1.4.1.890.1.15.3.57.1.2.1.1	DisplayString	read-write	Specify a descriptive name (up to 32 printable ASCII characters) for identification purposes.
INT zyOspfDistance	1.3.6.1.4.1.890.1.15.3.57.1.7.1	INTEGER	read-write	The administrative distance of OSPF routes.
INT zyOspfIfInfoAdjacentNbrCount	1.3.6.1.4.1.890.1.15.3.57.2.1.1.5	INTEGER	read-only	Counting the adjacent neighbor if its state is full.
IP zyOspfIfInfoBackupDesignatedRouterID	1.3.6.1.4.1.890.1.15.3.57.2.1.1.3	IpAddress	read-only	The IP Address of the Backup Designated Router.
IP zyOspfIfInfoDesignatedRouterID	1.3.6.1.4.1.890.1.15.3.57.2.1.1.2	IpAddress	read-only	The IP Address of the Designated Router.
STR zyOspfIfInfoHelloDueTime	1.3.6.1.4.1.890.1.15.3.57.2.1.1.6	DisplayString	read-only	The interface would send hello packet when the due time is timeout.
INT zyOspfIfInfoMaskbits	1.3.6.1.4.1.890.1.15.3.57.2.1.1.1	INTEGER	read-only	The subnet mask bits of an IP routing domain that is associated to this interface.
INT zyOspfIfInfoNbrCount	1.3.6.1.4.1.890.1.15.3.57.2.1.1.4	INTEGER	read-only	Regardless of state, counting all adjacent neighbors.
INT zyOspfIfKeyId	1.3.6.1.4.1.890.1.15.3.57.1.1.1.1	INTEGER	read-write	Specify the identification number of the authentication if you want to use.
INT zyOspfLsdbLinkCount	1.3.6.1.4.1.890.1.15.3.57.2.3.1.1	INTEGER	read-only	Display how many link in this Link State Database.
IP zyOspfLsdbRouteIpAddress	1.3.6.1.4.1.890.1.15.3.57.2.3.1.2	IpAddress	read-only	Display the ip address of routing domain in this Link State Database.
INT zyOspfLsdbRouteMaskBits	1.3.6.1.4.1.890.1.15.3.57.2.3.1.3	INTEGER	read-only	Display the mask bits of routing domain in this Link State Database.
INT zyOspfMaxNumberOfSummaryAddress	1.3.6.1.4.1.890.1.15.3.57.1.5	INTEGER	read-only	The maximum number of summary address that can be created.
INT zyOspfNbrDatabaseSummaryLSA	1.3.6.1.4.1.890.1.15.3.57.2.2.1.6	INTEGER	read-only	The complete list of LSAs that make up the area link-state database, at the moment the neighbor goes into Database Exchange state. This list is sent to the neighbor in DatabaseDescription packets.
STR zyOspfNbrDeadtime	1.3.6.1.4.1.890.1.15.3.57.2.2.1.2	DisplayString	read-only	The neighbor would be disconnect when the dead time is timeout. The dead time would be reset when the switch receives hello packet from the neighbor.
IP zyOspfNbrInterface	1.3.6.1.4.1.890.1.15.3.57.2.2.1.3	IpAddress	read-only	The interface is connected with the neighbor.
INT zyOspfNbrRequestLSA	1.3.6.1.4.1.890.1.15.3.57.2.2.1.5	INTEGER	read-only	The list of LSAs that need to be received from this neighbor in order to synchronize the two neighbors' link-state databases. This list is created as Database Description packets are received, and is then sent to the neighbor in Link State Request packets. The list is depleted as appropriate Link State Update packets are received.
INT zyOspfNbrRetransmitLSA	1.3.6.1.4.1.890.1.15.3.57.2.2.1.4	INTEGER	read-only	The list of LSAs that have been flooded but not acknowledged on this adjacency. These will be retransmitted at intervals until they are acknowledged, or until the adjacency is destroyed.
INT zyOspfNbrRole	1.3.6.1.4.1.890.1.15.3.57.2.2.1.1	INTEGER	read-only	This variable display the neighbor role.
INT zyOspfRedistributeRouteMetric	1.3.6.1.4.1.890.1.15.3.57.1.3.1.4	INTEGER	read-write	Specify a route cost (between 0 and 16777215).
INT zyOspfRedistributeRouteProtocol	1.3.6.1.4.1.890.1.15.3.57.1.3.1.1	INTEGER	read-only	Route redistribution allows your switch to import and translate external routes learned through RIP routing protocol or configured manually (Static) into the OSPF network transparently.
ENA zyOspfRedistributeRouteState	1.3.6.1.4.1.890.1.15.3.57.1.3.1.2	EnabledStatus	read-write	Enable/Disable the routing protocol to activate route redistribution for routes learned.
INT zyOspfRedistributeRouteType	1.3.6.1.4.1.890.1.15.3.57.1.3.1.3	INTEGER	read-write	Select 1 for routing protocols (such as RIP) whose external metrics are directly comparable to the internal OSPF cost. When selecting a path, the internal OSPF cost is added to the AB boundary router to the external metrics. Select 2 for routing protocols whose external metrics are not comparable to the OSPF cost. In this case, the external cost of the AB boundary router is used in path decision to a destination.
IP zyOspfSummaryAddressIpAddress	1.3.6.1.4.1.890.1.15.3.57.1.6.1.1	IpAddress	not-accessible	Specify a network IP address which can cover more than one network in order to reduce the routing table size. For example, you can use 192.168.8.0/22 instead of using 192.168.8.0/24, 192.168.9.0/24, 192.168.10.0/24, and 192.168.11.0/24. The third octet of these four network IP addresses is 00001000, 00001001, 00001010, 00001011 respectively. The first 6 digits (000010) are the common part among these IP addresses. So 192.168.8.0/22 can represent all of these networks.
INT zyOspfSummaryAddressMaskBits	1.3.6.1.4.1.890.1.15.3.57.1.6.1.2	INTEGER	read-only	Specify the subnet mask for this summary IP address which can cover multiple networks.
ROW zyOspfSummaryAddressRowStatus	1.3.6.1.4.1.890.1.15.3.57.1.6.1.3	RowStatus	read-create	This object allow entries to be created and deleted from the summary address table.
INT zyOspfVirtualLinkKeyId	1.3.6.1.4.1.890.1.15.3.57.1.4.1.2	INTEGER	read-write	Specify the identification number of the authentication you want to use.
STR zyOspfVirtualLinkName	1.3.6.1.4.1.890.1.15.3.57.1.4.1.1	DisplayString	read-write	Specify a descriptive name (up to 32 printable ASCII characters) for identification purpose.
zyxelOspf	1.3.6.1.4.1.890.1.15.3.57			The subtree for Open Shortest Path First (OSPF)
zyxelOspfAreaEntry	1.3.6.1.4.1.890.1.15.3.57.1.2.1		not-accessible	An entry contains OSPF area configuration.
zyxelOspfAreaTable	1.3.6.1.4.1.890.1.15.3.57.1.2		not-accessible	The table contains OSPF area configuration.
zyxelOspfGeneralGroup	1.3.6.1.4.1.890.1.15.3.57.1.7
zyxelOspfIfEntry	1.3.6.1.4.1.890.1.15.3.57.1.1.1		not-accessible	An entry contains OSPF interface configuration
zyxelOspfIfInfoEntry	1.3.6.1.4.1.890.1.15.3.57.2.1.1		not-accessible	An entry contains OSPF interface information.
zyxelOspfIfInfoTable	1.3.6.1.4.1.890.1.15.3.57.2.1		not-accessible	The table contains OSPF interface information.
zyxelOspfIfTable	1.3.6.1.4.1.890.1.15.3.57.1.1		not-accessible	The table contains OSPF interface configuration.
zyxelOspfLsdbEntry	1.3.6.1.4.1.890.1.15.3.57.2.3.1		not-accessible	An entry contains OSPF link state database information.
zyxelOspfLsdbTable	1.3.6.1.4.1.890.1.15.3.57.2.3		not-accessible	The table contains OSPF link state database information.
zyxelOspfNbrEntry	1.3.6.1.4.1.890.1.15.3.57.2.2.1		not-accessible	An entry contains OSPF neighbor information.
zyxelOspfNbrTable	1.3.6.1.4.1.890.1.15.3.57.2.2		not-accessible	The table contains OSPF neighbor information.
zyxelOspfRedistributeRouteEntry	1.3.6.1.4.1.890.1.15.3.57.1.3.1		not-accessible	An entry contains OSPF redistribute route configuration.
zyxelOspfRedistributeRouteTable	1.3.6.1.4.1.890.1.15.3.57.1.3		not-accessible	The table contains OSPF redistribute route configuration.
zyxelOspfSetup	1.3.6.1.4.1.890.1.15.3.57.1
zyxelOspfStatus	1.3.6.1.4.1.890.1.15.3.57.2
zyxelOspfSummaryAddressEntry	1.3.6.1.4.1.890.1.15.3.57.1.6.1		not-accessible	An entry contains OSPF summary address configuration.
zyxelOspfSummaryAddressTable	1.3.6.1.4.1.890.1.15.3.57.1.6		not-accessible	The table contains OSPF summary address configuration.
zyxelOspfVirtualLinkEntry	1.3.6.1.4.1.890.1.15.3.57.1.4.1		not-accessible	An entry contains OSPF virtual link configuration.
zyxelOspfVirtualLinkTable	1.3.6.1.4.1.890.1.15.3.57.1.4		not-accessible	The table contains OSPF virtual link configuration.

OID symbolic	OID numeric	Type	Access	Description
zyxelOspf	1.3.6.1.4.1.890.1.15.3.57			The subtree for Open Shortest Path First (OSPF)
zyxelOspfSetup	1.3.6.1.4.1.890.1.15.3.57.1
zyxelOspfIfTable	1.3.6.1.4.1.890.1.15.3.57.1.1		not-accessible	The table contains OSPF interface configuration.
zyxelOspfIfEntry	1.3.6.1.4.1.890.1.15.3.57.1.1.1		not-accessible	An entry contains OSPF interface configuration
INT zyOspfIfKeyId	1.3.6.1.4.1.890.1.15.3.57.1.1.1.1	INTEGER	read-write	Specify the identification number of the authentication if you want to use.
zyxelOspfAreaTable	1.3.6.1.4.1.890.1.15.3.57.1.2		not-accessible	The table contains OSPF area configuration.
zyxelOspfAreaEntry	1.3.6.1.4.1.890.1.15.3.57.1.2.1		not-accessible	An entry contains OSPF area configuration.
STR zyOspfAreaName	1.3.6.1.4.1.890.1.15.3.57.1.2.1.1	DisplayString	read-write	Specify a descriptive name (up to 32 printable ASCII characters) for identification purposes.
zyxelOspfRedistributeRouteTable	1.3.6.1.4.1.890.1.15.3.57.1.3		not-accessible	The table contains OSPF redistribute route configuration.
zyxelOspfRedistributeRouteEntry	1.3.6.1.4.1.890.1.15.3.57.1.3.1		not-accessible	An entry contains OSPF redistribute route configuration.
INT zyOspfRedistributeRouteProtocol	1.3.6.1.4.1.890.1.15.3.57.1.3.1.1	INTEGER	read-only	Route redistribution allows your switch to import and translate external routes learned through RIP routing protocol or configured manually (Static) into the OSPF network transparently.
ENA zyOspfRedistributeRouteState	1.3.6.1.4.1.890.1.15.3.57.1.3.1.2	EnabledStatus	read-write	Enable/Disable the routing protocol to activate route redistribution for routes learned.
INT zyOspfRedistributeRouteType	1.3.6.1.4.1.890.1.15.3.57.1.3.1.3	INTEGER	read-write	Select 1 for routing protocols (such as RIP) whose external metrics are directly comparable to the internal OSPF cost. When selecting a path, the internal OSPF cost is added to the AB boundary router to the external metrics. Select 2 for routing protocols whose external metrics are not comparable to the OSPF cost. In this case, the external cost of the AB boundary router is used in path decision to a destination.
INT zyOspfRedistributeRouteMetric	1.3.6.1.4.1.890.1.15.3.57.1.3.1.4	INTEGER	read-write	Specify a route cost (between 0 and 16777215).
zyxelOspfVirtualLinkTable	1.3.6.1.4.1.890.1.15.3.57.1.4		not-accessible	The table contains OSPF virtual link configuration.
zyxelOspfVirtualLinkEntry	1.3.6.1.4.1.890.1.15.3.57.1.4.1		not-accessible	An entry contains OSPF virtual link configuration.
STR zyOspfVirtualLinkName	1.3.6.1.4.1.890.1.15.3.57.1.4.1.1	DisplayString	read-write	Specify a descriptive name (up to 32 printable ASCII characters) for identification purpose.
INT zyOspfVirtualLinkKeyId	1.3.6.1.4.1.890.1.15.3.57.1.4.1.2	INTEGER	read-write	Specify the identification number of the authentication you want to use.
INT zyOspfMaxNumberOfSummaryAddress	1.3.6.1.4.1.890.1.15.3.57.1.5	INTEGER	read-only	The maximum number of summary address that can be created.
zyxelOspfSummaryAddressTable	1.3.6.1.4.1.890.1.15.3.57.1.6		not-accessible	The table contains OSPF summary address configuration.
zyxelOspfSummaryAddressEntry	1.3.6.1.4.1.890.1.15.3.57.1.6.1		not-accessible	An entry contains OSPF summary address configuration.
IP zyOspfSummaryAddressIpAddress	1.3.6.1.4.1.890.1.15.3.57.1.6.1.1	IpAddress	not-accessible	Specify a network IP address which can cover more than one network in order to reduce the routing table size. For example, you can use 192.168.8.0/22 instead of using 192.168.8.0/24, 192.168.9.0/24, 192.168.10.0/24, and 192.168.11.0/24. The third octet of these four network IP addresses is 00001000, 00001001, 00001010, 00001011 respectively. The first 6 digits (000010) are the common part among these IP addresses. So 192.168.8.0/22 can represent all of these networks.
INT zyOspfSummaryAddressMaskBits	1.3.6.1.4.1.890.1.15.3.57.1.6.1.2	INTEGER	read-only	Specify the subnet mask for this summary IP address which can cover multiple networks.
ROW zyOspfSummaryAddressRowStatus	1.3.6.1.4.1.890.1.15.3.57.1.6.1.3	RowStatus	read-create	This object allow entries to be created and deleted from the summary address table.
zyxelOspfGeneralGroup	1.3.6.1.4.1.890.1.15.3.57.1.7
INT zyOspfDistance	1.3.6.1.4.1.890.1.15.3.57.1.7.1	INTEGER	read-write	The administrative distance of OSPF routes.
zyxelOspfStatus	1.3.6.1.4.1.890.1.15.3.57.2
zyxelOspfIfInfoTable	1.3.6.1.4.1.890.1.15.3.57.2.1		not-accessible	The table contains OSPF interface information.
zyxelOspfIfInfoEntry	1.3.6.1.4.1.890.1.15.3.57.2.1.1		not-accessible	An entry contains OSPF interface information.
INT zyOspfIfInfoMaskbits	1.3.6.1.4.1.890.1.15.3.57.2.1.1.1	INTEGER	read-only	The subnet mask bits of an IP routing domain that is associated to this interface.
IP zyOspfIfInfoDesignatedRouterID	1.3.6.1.4.1.890.1.15.3.57.2.1.1.2	IpAddress	read-only	The IP Address of the Designated Router.
IP zyOspfIfInfoBackupDesignatedRouterID	1.3.6.1.4.1.890.1.15.3.57.2.1.1.3	IpAddress	read-only	The IP Address of the Backup Designated Router.
INT zyOspfIfInfoNbrCount	1.3.6.1.4.1.890.1.15.3.57.2.1.1.4	INTEGER	read-only	Regardless of state, counting all adjacent neighbors.
INT zyOspfIfInfoAdjacentNbrCount	1.3.6.1.4.1.890.1.15.3.57.2.1.1.5	INTEGER	read-only	Counting the adjacent neighbor if its state is full.
STR zyOspfIfInfoHelloDueTime	1.3.6.1.4.1.890.1.15.3.57.2.1.1.6	DisplayString	read-only	The interface would send hello packet when the due time is timeout.
zyxelOspfNbrTable	1.3.6.1.4.1.890.1.15.3.57.2.2		not-accessible	The table contains OSPF neighbor information.
zyxelOspfNbrEntry	1.3.6.1.4.1.890.1.15.3.57.2.2.1		not-accessible	An entry contains OSPF neighbor information.
INT zyOspfNbrRole	1.3.6.1.4.1.890.1.15.3.57.2.2.1.1	INTEGER	read-only	This variable display the neighbor role.
STR zyOspfNbrDeadtime	1.3.6.1.4.1.890.1.15.3.57.2.2.1.2	DisplayString	read-only	The neighbor would be disconnect when the dead time is timeout. The dead time would be reset when the switch receives hello packet from the neighbor.
IP zyOspfNbrInterface	1.3.6.1.4.1.890.1.15.3.57.2.2.1.3	IpAddress	read-only	The interface is connected with the neighbor.
INT zyOspfNbrRetransmitLSA	1.3.6.1.4.1.890.1.15.3.57.2.2.1.4	INTEGER	read-only	The list of LSAs that have been flooded but not acknowledged on this adjacency. These will be retransmitted at intervals until they are acknowledged, or until the adjacency is destroyed.
INT zyOspfNbrRequestLSA	1.3.6.1.4.1.890.1.15.3.57.2.2.1.5	INTEGER	read-only	The list of LSAs that need to be received from this neighbor in order to synchronize the two neighbors' link-state databases. This list is created as Database Description packets are received, and is then sent to the neighbor in Link State Request packets. The list is depleted as appropriate Link State Update packets are received.
INT zyOspfNbrDatabaseSummaryLSA	1.3.6.1.4.1.890.1.15.3.57.2.2.1.6	INTEGER	read-only	The complete list of LSAs that make up the area link-state database, at the moment the neighbor goes into Database Exchange state. This list is sent to the neighbor in DatabaseDescription packets.
zyxelOspfLsdbTable	1.3.6.1.4.1.890.1.15.3.57.2.3		not-accessible	The table contains OSPF link state database information.
zyxelOspfLsdbEntry	1.3.6.1.4.1.890.1.15.3.57.2.3.1		not-accessible	An entry contains OSPF link state database information.
INT zyOspfLsdbLinkCount	1.3.6.1.4.1.890.1.15.3.57.2.3.1.1	INTEGER	read-only	Display how many link in this Link State Database.
IP zyOspfLsdbRouteIpAddress	1.3.6.1.4.1.890.1.15.3.57.2.3.1.2	IpAddress	read-only	Display the ip address of routing domain in this Link State Database.
INT zyOspfLsdbRouteMaskBits	1.3.6.1.4.1.890.1.15.3.57.2.3.1.3	INTEGER	read-only	Display the mask bits of routing domain in this Link State Database.

DisplayString (4)
STR zyOspfAreaName	1.3.6.1.4.1.890.1.15.3.57.1.2.1.1	DisplayString	read-write	Specify a descriptive name (up to 32 printable ASCII characters) for identification purposes.
STR zyOspfIfInfoHelloDueTime	1.3.6.1.4.1.890.1.15.3.57.2.1.1.6	DisplayString	read-only	The interface would send hello packet when the due time is timeout.
STR zyOspfNbrDeadtime	1.3.6.1.4.1.890.1.15.3.57.2.2.1.2	DisplayString	read-only	The neighbor would be disconnect when the dead time is timeout. The dead time would be reset when the switch receives hello packet from the neighbor.
STR zyOspfVirtualLinkName	1.3.6.1.4.1.890.1.15.3.57.1.4.1.1	DisplayString	read-write	Specify a descriptive name (up to 32 printable ASCII characters) for identification purpose.
EnabledStatus (1)
ENA zyOspfRedistributeRouteState	1.3.6.1.4.1.890.1.15.3.57.1.3.1.2	EnabledStatus	read-write	Enable/Disable the routing protocol to activate route redistribution for routes learned.
INTEGER (17)
INT zyOspfDistance	1.3.6.1.4.1.890.1.15.3.57.1.7.1	INTEGER	read-write	The administrative distance of OSPF routes.
INT zyOspfIfInfoAdjacentNbrCount	1.3.6.1.4.1.890.1.15.3.57.2.1.1.5	INTEGER	read-only	Counting the adjacent neighbor if its state is full.
INT zyOspfIfInfoMaskbits	1.3.6.1.4.1.890.1.15.3.57.2.1.1.1	INTEGER	read-only	The subnet mask bits of an IP routing domain that is associated to this interface.
INT zyOspfIfInfoNbrCount	1.3.6.1.4.1.890.1.15.3.57.2.1.1.4	INTEGER	read-only	Regardless of state, counting all adjacent neighbors.
INT zyOspfIfKeyId	1.3.6.1.4.1.890.1.15.3.57.1.1.1.1	INTEGER	read-write	Specify the identification number of the authentication if you want to use.
INT zyOspfLsdbLinkCount	1.3.6.1.4.1.890.1.15.3.57.2.3.1.1	INTEGER	read-only	Display how many link in this Link State Database.
INT zyOspfLsdbRouteMaskBits	1.3.6.1.4.1.890.1.15.3.57.2.3.1.3	INTEGER	read-only	Display the mask bits of routing domain in this Link State Database.
INT zyOspfMaxNumberOfSummaryAddress	1.3.6.1.4.1.890.1.15.3.57.1.5	INTEGER	read-only	The maximum number of summary address that can be created.
INT zyOspfNbrDatabaseSummaryLSA	1.3.6.1.4.1.890.1.15.3.57.2.2.1.6	INTEGER	read-only	The complete list of LSAs that make up the area link-state database, at the moment the neighbor goes into Database Exchange state. This list is sent to the neighbor in DatabaseDescription packets.
INT zyOspfNbrRequestLSA	1.3.6.1.4.1.890.1.15.3.57.2.2.1.5	INTEGER	read-only	The list of LSAs that need to be received from this neighbor in order to synchronize the two neighbors' link-state databases. This list is created as Database Description packets are received, and is then sent to the neighbor in Link State Request packets. The list is depleted as appropriate Link State Update packets are received.
INT zyOspfNbrRetransmitLSA	1.3.6.1.4.1.890.1.15.3.57.2.2.1.4	INTEGER	read-only	The list of LSAs that have been flooded but not acknowledged on this adjacency. These will be retransmitted at intervals until they are acknowledged, or until the adjacency is destroyed.
INT zyOspfNbrRole	1.3.6.1.4.1.890.1.15.3.57.2.2.1.1	INTEGER	read-only	This variable display the neighbor role.
INT zyOspfRedistributeRouteMetric	1.3.6.1.4.1.890.1.15.3.57.1.3.1.4	INTEGER	read-write	Specify a route cost (between 0 and 16777215).
INT zyOspfRedistributeRouteProtocol	1.3.6.1.4.1.890.1.15.3.57.1.3.1.1	INTEGER	read-only	Route redistribution allows your switch to import and translate external routes learned through RIP routing protocol or configured manually (Static) into the OSPF network transparently.
INT zyOspfRedistributeRouteType	1.3.6.1.4.1.890.1.15.3.57.1.3.1.3	INTEGER	read-write	Select 1 for routing protocols (such as RIP) whose external metrics are directly comparable to the internal OSPF cost. When selecting a path, the internal OSPF cost is added to the AB boundary router to the external metrics. Select 2 for routing protocols whose external metrics are not comparable to the OSPF cost. In this case, the external cost of the AB boundary router is used in path decision to a destination.
INT zyOspfSummaryAddressMaskBits	1.3.6.1.4.1.890.1.15.3.57.1.6.1.2	INTEGER	read-only	Specify the subnet mask for this summary IP address which can cover multiple networks.
INT zyOspfVirtualLinkKeyId	1.3.6.1.4.1.890.1.15.3.57.1.4.1.2	INTEGER	read-write	Specify the identification number of the authentication you want to use.
IpAddress (5)
IP zyOspfIfInfoBackupDesignatedRouterID	1.3.6.1.4.1.890.1.15.3.57.2.1.1.3	IpAddress	read-only	The IP Address of the Backup Designated Router.
IP zyOspfIfInfoDesignatedRouterID	1.3.6.1.4.1.890.1.15.3.57.2.1.1.2	IpAddress	read-only	The IP Address of the Designated Router.
IP zyOspfLsdbRouteIpAddress	1.3.6.1.4.1.890.1.15.3.57.2.3.1.2	IpAddress	read-only	Display the ip address of routing domain in this Link State Database.
IP zyOspfNbrInterface	1.3.6.1.4.1.890.1.15.3.57.2.2.1.3	IpAddress	read-only	The interface is connected with the neighbor.
IP zyOspfSummaryAddressIpAddress	1.3.6.1.4.1.890.1.15.3.57.1.6.1.1	IpAddress	not-accessible	Specify a network IP address which can cover more than one network in order to reduce the routing table size. For example, you can use 192.168.8.0/22 instead of using 192.168.8.0/24, 192.168.9.0/24, 192.168.10.0/24, and 192.168.11.0/24. The third octet of these four network IP addresses is 00001000, 00001001, 00001010, 00001011 respectively. The first 6 digits (000010) are the common part among these IP addresses. So 192.168.8.0/22 can represent all of these networks.
RowStatus (1)
ROW zyOspfSummaryAddressRowStatus	1.3.6.1.4.1.890.1.15.3.57.1.6.1.3	RowStatus	read-create	This object allow entries to be created and deleted from the summary address table.
No type (20)
zyxelOspf	1.3.6.1.4.1.890.1.15.3.57			The subtree for Open Shortest Path First (OSPF)
zyxelOspfAreaEntry	1.3.6.1.4.1.890.1.15.3.57.1.2.1		not-accessible	An entry contains OSPF area configuration.
zyxelOspfAreaTable	1.3.6.1.4.1.890.1.15.3.57.1.2		not-accessible	The table contains OSPF area configuration.
zyxelOspfGeneralGroup	1.3.6.1.4.1.890.1.15.3.57.1.7
zyxelOspfIfEntry	1.3.6.1.4.1.890.1.15.3.57.1.1.1		not-accessible	An entry contains OSPF interface configuration
zyxelOspfIfInfoEntry	1.3.6.1.4.1.890.1.15.3.57.2.1.1		not-accessible	An entry contains OSPF interface information.
zyxelOspfIfInfoTable	1.3.6.1.4.1.890.1.15.3.57.2.1		not-accessible	The table contains OSPF interface information.
zyxelOspfIfTable	1.3.6.1.4.1.890.1.15.3.57.1.1		not-accessible	The table contains OSPF interface configuration.
zyxelOspfLsdbEntry	1.3.6.1.4.1.890.1.15.3.57.2.3.1		not-accessible	An entry contains OSPF link state database information.
zyxelOspfLsdbTable	1.3.6.1.4.1.890.1.15.3.57.2.3		not-accessible	The table contains OSPF link state database information.
zyxelOspfNbrEntry	1.3.6.1.4.1.890.1.15.3.57.2.2.1		not-accessible	An entry contains OSPF neighbor information.
zyxelOspfNbrTable	1.3.6.1.4.1.890.1.15.3.57.2.2		not-accessible	The table contains OSPF neighbor information.
zyxelOspfRedistributeRouteEntry	1.3.6.1.4.1.890.1.15.3.57.1.3.1		not-accessible	An entry contains OSPF redistribute route configuration.
zyxelOspfRedistributeRouteTable	1.3.6.1.4.1.890.1.15.3.57.1.3		not-accessible	The table contains OSPF redistribute route configuration.
zyxelOspfSetup	1.3.6.1.4.1.890.1.15.3.57.1
zyxelOspfStatus	1.3.6.1.4.1.890.1.15.3.57.2
zyxelOspfSummaryAddressEntry	1.3.6.1.4.1.890.1.15.3.57.1.6.1		not-accessible	An entry contains OSPF summary address configuration.
zyxelOspfSummaryAddressTable	1.3.6.1.4.1.890.1.15.3.57.1.6		not-accessible	The table contains OSPF summary address configuration.
zyxelOspfVirtualLinkEntry	1.3.6.1.4.1.890.1.15.3.57.1.4.1		not-accessible	An entry contains OSPF virtual link configuration.
zyxelOspfVirtualLinkTable	1.3.6.1.4.1.890.1.15.3.57.1.4		not-accessible	The table contains OSPF virtual link configuration.

RFC description

Manages OSPF (Open Shortest Path First) routing protocol configuration on ZyXEL network devices.

Start monitoring ZyXEL router or Layer 3 switch running OSPF (area/adjacency/LSA config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZYXEL-OSPF-MIB

This MIB depends on

Related MIBs

What Is ZYXEL-OSPF-MIB?

Supported Devices

Monitoring Examples

RFC description