ZYXEL-IPV6-STATIC-ROUTE-MIB

Description: Manages ZyXEL IPv6 static routing table entries for manual IPv6 path configuration.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

ZYXEL-IPV6-STATIC-ROUTE-MIB is a ZyXEL vendor MIB covering IPv6 static routing configuration on ZyXEL routers/gateways/switches, allowing management stations to view and configure manually-defined IPv6 routes. It exposes a static route table with destination prefix, next-hop, interface, and metric-style configuration objects typical of static routing MIBs. Its monitoring value is primarily configuration-status oriented — confirming which static IPv6 routes are provisioned and active rather than reporting hardware health, though an absent or inactive expected route can indicate a configuration or link problem. It depends on the standard IETF IPv6 addressing/routing model (similar in spirit to IP-FORWARD-MIB) though implemented as a ZyXEL proprietary table rather than the standard MIB. It is deployed on ZyXEL routers, security gateways, and switches in small-to-midsize networks running dual-stack or IPv6-only routing that rely on manually configured paths. Engineers can download the ZYXEL-IPV6-STATIC-ROUTE-MIB file directly to load it into their MIB browser.

No object names were captured for this module, so specific OIDs cannot be cited; based on the short description, an admin would typically poll the static route table to confirm a configured IPv6 destination prefix, next-hop, and egress interface are present and active, and would notice a missing or disabled entry if a manually configured route had been lost after a reboot or config change.

ZyXEL IPv6 static route management MIB for configuring and monitoring static IPv6 routes on ZyXEL devices.