All MIBs › ZYXEL-RIP-MIB
Organization: Enterprise Solution ZyXEL
Last Updated: 2012-07-01
Category: ZyXEL Routing and IP Services
Description:
Covers ZyXEL RIP protocol configuration, which enables dynamic route exchange within small-scale network environments.
Imported Objects
From P-BRIDGE-MIB
| EnabledStatus |
From SNMPv2-SMI
| MODULE-IDENTITY | |
| OBJECT-TYPE |
From ZYXEL-ES-SMI
| esMgmt | OBJECT-IDENTITY |
From ZYXEL-IP-FORWARD-MIB
| zyRouteDomainIpAddress | OBJECT-TYPE |
| zyRouteDomainIpMaskBits | OBJECT-TYPE |
What Is ZYXEL-RIP-MIB?
ZYXEL-RIP-MIB is a ZyXEL private enterprise MIB managing the Routing Information Protocol on ZyXEL layer-3 devices for dynamic route exchange in small networks. It exposes RIP configuration such as enabled interfaces, RIP version, and route redistribution settings. Monitoring confirms RIP is running and exchanging routes as expected on the correct interfaces, a protocol/software-state health check that reveals routing configuration problems rather than hardware faults. It builds directly on the standard RIP protocol (RFC 2453) and standard RIPv2-MIB conventions. It is deployed on small-to-midsize ZyXEL layer-3 switches/routers using RIP for simple dynamic routing between a handful of subnets. Engineers can download the ZYXEL-RIP-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in ZYXEL-RIP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
What Can Be Monitored
- RIP enable status per interface
- RIP version configuration
- route redistribution settings
Supported Devices
- ZyXEL layer-3 switch/router
Monitoring Examples
No object/table names were present in the sampled data. Per the module description ("the subtree for Routing Information Protocol"), the module exposes per-interface RIP enable/version configuration that an administrator checks to confirm RIP is active on expected interfaces and routes are being exchanged.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| zyxelRip | 1.3.6.1.4.1.890.1.15.3.74 | The subtree for Routing Information Protocol (RIP) | ||
| zyxelRipSetup | 1.3.6.1.4.1.890.1.15.3.74.1 | |||
| ENA zyRipState | 1.3.6.1.4.1.890.1.15.3.74.1.1 | EnabledStatus | read-write | Enabled/Disabled RIP on the Switch. |
| INT zyRipDistance | 1.3.6.1.4.1.890.1.15.3.74.1.2 | INTEGER | read-write | The administrative distance of RIP routes. |
| zyxelRipRouteDomainTable | 1.3.6.1.4.1.890.1.15.3.74.1.3 | not-accessible | The table contains RIP route domain configuration. | |
| zyxelRipRouteDomainEntry | 1.3.6.1.4.1.890.1.15.3.74.1.3.1 | not-accessible | An entry contains RIP route domain configuration. | |
| INT zyRipRouteDomainDirection | 1.3.6.1.4.1.890.1.15.3.74.1.3.1.1 | INTEGER | read-write | RIP direction which controls the sending and receiving of RIP packet. |
| INT zyRipRouteDomainVersion | 1.3.6.1.4.1.890.1.15.3.74.1.3.1.2 | INTEGER | read-write | RIP version which controls the format and the broadcasting method of the RIP packets that the switch sends. |
RFC description
Manages ZyXEL RIP routing protocol configuration for dynamic route exchange in small network environments.
Start monitoring ZyXEL layer-3 switch/router (RIP enabled-interface/version/redistribution config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.