All MIBs › ZYXEL-ES2108-MIB › eventClearedTrap

eventClearedTrap

OID (symbolic): ZYXEL-ES2108-MIB::eventClearedTrap

OID (numeric): 1.3.6.1.4.1.890.1.5.8.18.27.2.2

Node type: NOTIFICATION-TYPE

Description: This trap is used to inform network management system that a normal type fault event has been cleared (state set off).

Objects are used as follows: - eventSeqNum is the sequence number of the this clearing event. Note that the sequence number of the cleared event is reported in the trapRefSeqNum object. - eventEventId specifies what event has been cleared. - eventSetTime indicates when fault event has been cleared. - eventInstanceType indicates what kind of object has been faulty. - eventInstanceId specifies what instance has been faulty. - trapRefSeqNum specifies the sequence number of the cleared event (i.e. the sequence number was assigned for the event in the events table). - trapSenderNodeId specifies the node ID of the sending network element if configuring it is supported for the network element, otherwise 0. - sysObjectID specifies what kind of equipment reports the clearing event.

For more information see the eventTable specification

Examples

Send this trap to an SNMP manager — replace <manager> with the IP or hostname of your monitoring server (SNMPv2c):

snmptrap -v2c -c public <manager> '' ZYXEL-ES2108-MIB::eventClearedTrap
snmptrap -v2c -c public <manager> '' 1.3.6.1.4.1.890.1.5.8.18.27.2.2

Listen for incoming traps on the manager host (-f keeps it in the foreground, -Lo prints to stdout — useful for testing):

snmptrapd -f -Lo -c /dev/null authCommunity log public

Example snmptrapd log entry:

zoo11-linux.zoo [UDP: [192.168.30.111]:55830->[192.168.30.10]:162]:
  DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (441952278) 51 days, 3:38:42.78
  SNMPv2-MIB::snmpTrapOID.0 = OID: ZYXEL-ES2108-MIB::eventClearedTrap

Start monitoring ZyXEL ES-2108 8-port Fast Ethernet switch (event-log severity/service-affecting-fault trap status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZYXEL-ES2108-MIB::eventClearedTrap OID value, configure state conditions and alerts, and monitor any ZyXEL ES-2108 8-port Fast Ethernet switch (event-log severity/service-affecting-fault trap status) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.890	zyxel	IES5206-MIB
1.3.6.1.4.1.890.1	products	IES5206-MIB
1.3.6.1.4.1.890.1.5	accessSwitch	IES5206-MIB
1.3.6.1.4.1.890.1.5.8	esSeries	ZYXEL-ES2024A-MIB

Numeric OID	Name	Module
1.3.6.1.4.1.890.1.5.8.18	es2108	ZYXEL-ES2108-MIB
1.3.6.1.4.1.890.1.5.8.18.27	faultTrapsMIB	ZYXEL-ES2108-MIB
1.3.6.1.4.1.890.1.5.8.18.27.2	trapNotifications	ZYXEL-ES2108-MIB
1.3.6.1.4.1.890.1.5.8.18.27.2.2	eventClearedTrap	ZYXEL-ES2108-MIB

ZYXEL-ES2108-MIB :: eventClearedTrap

eventClearedTrap

Module

This MIB depends on