All MIBs › ZXR10-TACPLUS-MIB › zxr10TacacsStatus
zxr10TacacsStatus
Module: ZXR10-TACPLUS-MIB
OID (symbolic): ZXR10-TACPLUS-MIB::zxr10TacacsStatus
OID (numeric): 1.3.6.1.4.1.3902.3.1020.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The TACACS+ status,where 0 means disable and 1 means enable
What is zxr10TacacsStatus?
This object reports whether the TACACS+ authentication feature is currently enabled(1) or disabled(0) on the device. An admin checks this to confirm TACACS+ is active before troubleshooting why local or RADIUS-based logins are being used instead. Seeing disable(0) here would explain why configured TACACS+ servers aren't being contacted for authentication.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.3.1020.1 snmpwalk -v2c -c public <target> ZXR10-TACPLUS-MIB::zxr10TacacsStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.3.1020.1.1 snmpget -v2c -c public <target> ZXR10-TACPLUS-MIB::zxr10TacacsStatus.1
Start monitoring ZTE ZXR10 router/switch (TACACS+ server address/timeout/key config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZXR10-TACPLUS-MIB::zxr10TacacsStatus OID value, configure state conditions and alerts, and monitor any ZTE ZXR10 router/switch (TACACS+ server address/timeout/key config status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | DPI-MIB |
| 1.3.6.1.4.1.3902.3 | zxr10 | FANS-POWER-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.3.1020 | zxr10Tacplus | ZXR10-TACPLUS-MIB |
| 1.3.6.1.4.1.3902.3.1020.1 | zxr10TacacsStatus | ZXR10-TACPLUS-MIB |