ZXR10-PTP-MIB :: zxr10PTPPortConfigEnable

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › ZXR10-PTP-MIB › zxr10PTPPortConfigEnable

zxr10PTPPortConfigEnable

Module: ZXR10-PTP-MIB

OID (symbolic): ZXR10-PTP-MIB::zxr10PTPPortConfigEnable

OID (numeric): 1.3.6.1.4.1.3902.3.101.10.4.1.4

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: Enable or disable a ptp port.

What is zxr10PTPPortConfigEnable?

Read-only indicator (in the legacy per-interface PTP config table) of whether PTP is enabled on this port; check it to confirm timing is actually turned on for a specific interface.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.3.101.10.4.1.4
snmpwalk -v2c -c public <target> ZXR10-PTP-MIB::zxr10PTPPortConfigEnable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.3.101.10.4.1.4.1
snmpget -v2c -c public <target> ZXR10-PTP-MIB::zxr10PTPPortConfigEnable.1

Start monitoring ZTE ZXR10 series switches/routers (IEEE 1588 PTP clock-lock/port-state status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZXR10-PTP-MIB::zxr10PTPPortConfigEnable OID value, configure state conditions and alerts, and monitor any ZTE ZXR10 series switches/routers (IEEE 1588 PTP clock-lock/port-state status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.3902zteDPI-MIB
1.3.6.1.4.1.3902.3zxr10FANS-POWER-MIB
1.3.6.1.4.1.3902.3.101zxr10protocolZXR10-IP-VRF-ADDR-MIB
Numeric OIDNameModule
1.3.6.1.4.1.3902.3.101.10zxr10ptpZXR10-PTP-MIB
1.3.6.1.4.1.3902.3.101.10.4zxr10ptpIntfConfTableZXR10-PTP-MIB
1.3.6.1.4.1.3902.3.101.10.4.1zxr10ptpIntfConfEntryZXR10-PTP-MIB
1.3.6.1.4.1.3902.3.101.10.4.1.4zxr10PTPPortConfigEnableZXR10-PTP-MIB

Module

This MIB depends on