-- File Name : ZXR10-GM.mib
-- Date      : 2005-3-1 9:33
-- Author    :   
-- Modifier  : LiXuwen  2009-3-1 21:30


ZXR10-ES-GROUP-MGMT-MIB	DEFINITIONS ::= BEGIN
	IMPORTS
		RowStatus, TEXTUAL-CONVENTION
			FROM SNMPv2-TC
		OBJECT-TYPE, Integer32, IpAddress, Unsigned32, enterprises
			FROM SNMPv2-SMI;

-- TEXTUAL-CONVENTIONS --
	MacAddress ::= TEXTUAL-CONVENTION 
		DISPLAY-HINT	""
		STATUS			current
		DESCRIPTION
			"Represents an 802 MAC address represented in the
             `canonical' order defined by IEEE 802.1a, i.e., as if it
             were transmitted least significant bit first, even though
             802.5 (in contrast to other 802.x protocols) requires MAC
             addresses to be transmitted most significant bit first."
		SYNTAX 			OCTET STRING

    zte	OBJECT IDENTIFIER
		::=  {  enterprises  3902  }
		
	ethernetSwitch	OBJECT IDENTIFIER
		::=  {  zte  15  }

	groupManagement	OBJECT IDENTIFIER
		::=  {  ethernetSwitch  4  }

	groupParam	OBJECT IDENTIFIER
		::=  {  groupManagement  1  }

	neighborDiscovery	OBJECT IDENTIFIER
		::=  {  groupManagement  2  }

	topologyCollect	OBJECT IDENTIFIER
		::=  {  groupManagement  3  }

	memberManage	OBJECT IDENTIFIER
		::=  {  groupManagement  4  }

	gmEnterpriseTrap	OBJECT IDENTIFIER
		::=  {  groupManagement  5  }

	gmHandtime	OBJECT-TYPE	
		SYNTAX			Integer32  ( 1 .. 300  ) 
		MAX-ACCESS		read-write
		STATUS			current
		DESCRIPTION		"Handshake packet interval.
					Only command switch support this item."
		::=  {  groupParam  1  }

	gmHoldtime	OBJECT-TYPE	
		SYNTAX			Integer32  ( 1 .. 300  ) 
		MAX-ACCESS		read-write
		STATUS			current
		DESCRIPTION		"Group member hold time.
					Only command switch support this item."
		::=  {  groupParam  2  }

	gmName	OBJECT-TYPE	
		SYNTAX			OCTET STRING
		MAX-ACCESS		read-write
		STATUS			current
		DESCRIPTION		"Group name.
					Only command switch support this item."
		::=  {  groupParam  3  }

	gmSwitchRole	OBJECT-TYPE	
		SYNTAX			INTEGER  { commandSwitch ( 1 ) , memberSwitch ( 2 ) , candidateSwitch ( 3 ) , independentSwitch ( 4 ) } 
		MAX-ACCESS		read-write
		STATUS			current
		DESCRIPTION		"Switch role."
		::=  {  groupParam  4  }

	gmIpPool	OBJECT-TYPE	
		SYNTAX			OCTET STRING
		MAX-ACCESS		read-write
		STATUS			current
		DESCRIPTION		"The format of this item is xx/xx.
					The first segment represents vlan id, the second segment represents ippool name."
		::=  {  groupParam  5  }

	tftpServerIpAddr	OBJECT-TYPE	
		SYNTAX			IpAddress
		MAX-ACCESS		read-write
		STATUS			current
		DESCRIPTION		"TFTP server IP address.
					Only command switch support this item."
		::=  {  groupParam  6  }

	belongedCmdMac	OBJECT-TYPE	
		SYNTAX			MacAddress
		MAX-ACCESS		read-only
		STATUS			current
		DESCRIPTION		"Command switch MAC address of the group."
		::=  {  groupParam  7  }

	dpAdminStatus	OBJECT-TYPE	
		SYNTAX			INTEGER  { enable ( 1 ) , disable ( 2 ) } 
		MAX-ACCESS		read-write
		STATUS			current
		DESCRIPTION		"Global neighbor discovery protocol status."
		::=  {  neighborDiscovery  1  }

	dpTimer	OBJECT-TYPE	
		SYNTAX			Integer32  ( 5 .. 254  ) 
		MAX-ACCESS		read-write
		STATUS			current
		DESCRIPTION		"Neighbor discovery protocol send packets interval."
		::=  {  neighborDiscovery  2  }

	dpHoldtime	OBJECT-TYPE	
		SYNTAX			Integer32  ( 10 .. 255  ) 
		MAX-ACCESS		read-write
		STATUS			current
		DESCRIPTION		"Neighbor discovery protocol hold time."
		::=  {  neighborDiscovery  3  }

	dpPortTable	OBJECT-TYPE
		SYNTAX		SEQUENCE  OF  DpPortEntry
		MAX-ACCESS	not-accessible
		STATUS		current
		DESCRIPTION	"Port neighbor discovery protocol table."
		::=  { neighborDiscovery  4 }

	dpPortEntry	OBJECT-TYPE
		SYNTAX		DpPortEntry
		MAX-ACCESS	not-accessible
		STATUS		current
		DESCRIPTION	"Port neighbor discovery protocol configuration."
		INDEX		{  dpPortId  }
		::=  { dpPortTable 1 }

	DpPortEntry  ::=  SEQUENCE {
		dpPortId  Integer32,
		dpPortAdminStatus  INTEGER
		}


	dpPortId	OBJECT-TYPE	
		SYNTAX			Integer32
		MAX-ACCESS		not-accessible
		STATUS			current
		DESCRIPTION		"Port index."
		::=  {  dpPortEntry  1  }


	dpPortAdminStatus	OBJECT-TYPE	
		SYNTAX			INTEGER  { enable ( 1 ) , disable ( 2 ) } 
		MAX-ACCESS		read-write
		STATUS			current
		DESCRIPTION		"Port neighbor discovery protocol status."
		::=  {  dpPortEntry  2  }

	dpTrunkTable	OBJECT-TYPE
		SYNTAX		SEQUENCE  OF  DpTrunkEntry
		MAX-ACCESS	not-accessible
		STATUS		current
		DESCRIPTION	"Smartgroup port neighbor discovery protocol table."
		::=  { neighborDiscovery  5 }

	dpTrunkEntry	OBJECT-TYPE
		SYNTAX		DpTrunkEntry
		MAX-ACCESS	not-accessible
		STATUS		current
		DESCRIPTION	"Smartgroup port neighbor discovery protocol configuration."
		INDEX		{  dpTrunkId  }
		::=  { dpTrunkTable 1 }

	DpTrunkEntry  ::=  SEQUENCE {
		dpTrunkId  Integer32,
		dpTrunkAdminStatus  INTEGER
		}


	dpTrunkId	OBJECT-TYPE	
		SYNTAX			Integer32
		MAX-ACCESS		not-accessible
		STATUS			current
		DESCRIPTION		"Smartgroup port index."
		::=  {  dpTrunkEntry  1  }


	dpTrunkAdminStatus	OBJECT-TYPE	
		SYNTAX			INTEGER  { enable ( 1 ) , disable ( 2 ) } 
		MAX-ACCESS		read-write
		STATUS			current
		DESCRIPTION		"Smartgroup port neighbor discovery protocol status."
		::=  {  dpTrunkEntry  2  }

	tpAdminStatus	OBJECT-TYPE	
		SYNTAX			INTEGER  { enable ( 1 ) , disable ( 2 ) } 
		MAX-ACCESS		read-write
		STATUS			current
		DESCRIPTION		"Global topology collect protocol status."
		::=  {  topologyCollect  1  }

	tpVlan	OBJECT-TYPE	
		SYNTAX			Integer32  ( 1 .. 4094  ) 
		MAX-ACCESS		read-write
		STATUS			current
		DESCRIPTION		"Vlan id."
		::=  {  topologyCollect  2  }

	tpHop	OBJECT-TYPE	
		SYNTAX			Integer32  ( 1 .. 128  ) 
		MAX-ACCESS		read-write
		STATUS			current
		DESCRIPTION		"Topology collect protocol hop."
		::=  {  topologyCollect  3  }

	tpTimer	OBJECT-TYPE	
		SYNTAX			Integer32  ( 0 .. 60  ) 
		MAX-ACCESS		read-write
		STATUS			current
		DESCRIPTION		"Topology collect protocol time interval."
		::=  {  topologyCollect  4  }

	tpHopDelay	OBJECT-TYPE	
		SYNTAX			Integer32  ( 1 .. 1000  ) 
		MAX-ACCESS		read-write
		STATUS			current
		DESCRIPTION		"Delay time for device forwarding packets."
		::=  {  topologyCollect  5  }

	tpPortDelay	OBJECT-TYPE	
		SYNTAX			Integer32  ( 1 .. 100  ) 
		MAX-ACCESS		read-write
		STATUS			current
		DESCRIPTION		"Delay time for port forwarding packets."
		::=  {  topologyCollect  6  }

	tpStart	OBJECT-TYPE	
		SYNTAX			INTEGER  { start ( 1 ) } 
		MAX-ACCESS		read-write
		STATUS			current
		DESCRIPTION		"The value get from this item is insignificant. 
					Setting this item will start a topology collection process."
		::=  {  topologyCollect  7  }

	tpPortTable	OBJECT-TYPE
		SYNTAX		SEQUENCE  OF  TpPortEntry
		MAX-ACCESS	not-accessible
		STATUS		current
		DESCRIPTION	"Port topology collect protocol table."
		::=  { topologyCollect  8 }

	tpPortEntry	OBJECT-TYPE
		SYNTAX		TpPortEntry
		MAX-ACCESS	not-accessible
		STATUS		current
		DESCRIPTION	"Port topology collect protocol configuration."
		INDEX		{  tpPortId  }
		::=  { tpPortTable 1 }

	TpPortEntry  ::=  SEQUENCE {
		tpPortId  Integer32,
		tpPortAdminStatus  INTEGER
		}


	tpPortId	OBJECT-TYPE	
		SYNTAX			Integer32
		MAX-ACCESS		not-accessible
		STATUS			current
		DESCRIPTION		"Port index."
		::=  {  tpPortEntry  1  }


	tpPortAdminStatus	OBJECT-TYPE	
		SYNTAX			INTEGER  { enable ( 1 ) , disable ( 2 ) } 
		MAX-ACCESS		read-write
		STATUS			current
		DESCRIPTION		"Port topology collect protocol status."
		::=  {  tpPortEntry  2  }

	tpTrunkTable	OBJECT-TYPE
		SYNTAX		SEQUENCE  OF  TpTrunkEntry
		MAX-ACCESS	not-accessible
		STATUS		current
		DESCRIPTION	"Smartgroup port topology collect protocol table."
		::=  { topologyCollect  9 }

	tpTrunkEntry	OBJECT-TYPE
		SYNTAX		TpTrunkEntry
		MAX-ACCESS	not-accessible
		STATUS		current
		DESCRIPTION	"Smartgroup port topology collect protocol configuration."
		INDEX		{  tpTrunkId  }
		::=  { tpTrunkTable 1 }

	TpTrunkEntry  ::=  SEQUENCE {
		tpTrunkId  Integer32,
		tpTrunkAdminStatus  INTEGER
		}


	tpTrunkId	OBJECT-TYPE	
		SYNTAX			Integer32
		MAX-ACCESS		not-accessible
		STATUS			current
		DESCRIPTION		"Smartgroup port index."
		::=  {  tpTrunkEntry  1  }


	tpTrunkAdminStatus	OBJECT-TYPE	
		SYNTAX			INTEGER  { enable ( 1 ) , disable ( 2 ) } 
		MAX-ACCESS		read-write
		STATUS			current
		DESCRIPTION		"Smartgroup port topology collect protocol status."
		::=  {  tpTrunkEntry  2  }

	tpDeviceTable	OBJECT-TYPE
		SYNTAX		SEQUENCE  OF  TpDeviceEntry
		MAX-ACCESS	not-accessible
		STATUS		current
		DESCRIPTION	"Device topology collect protocol table."
		::=  { topologyCollect  10 }

	tpDeviceEntry	OBJECT-TYPE
		SYNTAX		TpDeviceEntry
		MAX-ACCESS	not-accessible
		STATUS		current
		DESCRIPTION	"Device topology collect protocol configuration."
		INDEX		{  deviceMac  }
		::=  { tpDeviceTable 1 }

	TpDeviceEntry  ::=  SEQUENCE {
		deviceMac  MacAddress,
		deviceId  Integer32,
		deviceIpAddr  IpAddress,
		deviceHop  Integer32,
		devicePlatform  OCTET STRING,
		deviceRole  INTEGER,
		devicePeerPort  OCTET STRING,
		deviceBelongedMac  MacAddress,
		deviceBelongedIpAddr  IpAddress
		}

	deviceMac	OBJECT-TYPE	
		SYNTAX			MacAddress 
		MAX-ACCESS		read-only
		STATUS			current
		DESCRIPTION		"Device MAC address."
		::=  {  tpDeviceEntry  1  }


	deviceId	OBJECT-TYPE	
		SYNTAX			Integer32  ( -2147483648 .. 2147483647  ) 
		MAX-ACCESS		read-only
		STATUS			current
		DESCRIPTION		"Device id."
		::=  {  tpDeviceEntry  2  }


	deviceIpAddr	OBJECT-TYPE	
		SYNTAX			IpAddress
		MAX-ACCESS		read-only
		STATUS			current
		DESCRIPTION		"Device vlan IP address."
		::=  {  tpDeviceEntry  3  }
		
	deviceHop	OBJECT-TYPE	
		SYNTAX			Integer32
		MAX-ACCESS		read-only
		STATUS			current
		DESCRIPTION		"Device hop."
		::=  {  tpDeviceEntry  4  }


	devicePlatform	OBJECT-TYPE	
		SYNTAX			OCTET STRING
		MAX-ACCESS		read-only
		STATUS			current
		DESCRIPTION		"Device description."
		::=  {  tpDeviceEntry  5  }


	deviceRole	OBJECT-TYPE	
		SYNTAX			INTEGER  { commandSwitch ( 1 ) , memberSwitch ( 2 ) , candidateSwitch ( 3 ) , independentSwitch ( 4 ) } 
		MAX-ACCESS		read-write
		STATUS			current
		DESCRIPTION		"Device switch role."
		::=  {  tpDeviceEntry  6  }


	devicePeerPort	OBJECT-TYPE	
		SYNTAX			OCTET STRING
		MAX-ACCESS		read-only
		STATUS			current
		DESCRIPTION		"The format of this item is xx-xx.
					The first segment represents local port name, the second segment represents peer port name."
		::=  {  tpDeviceEntry  7  }


	deviceBelongedMac	OBJECT-TYPE	
		SYNTAX			MacAddress
		MAX-ACCESS		read-only
		STATUS			current
		DESCRIPTION		"If the device switch role is not memberSwitch, 
					this value is the device system MAC address, 
					otherwise this value is the command switch MAC address of the group."
		::=  {  tpDeviceEntry  8  }

	deviceBelongedIpAddr	OBJECT-TYPE	
		SYNTAX			IpAddress
		MAX-ACCESS		read-only
		STATUS			current
		DESCRIPTION		"If the device switch role is commandSwitch or memberSwitch, 
					this value is the command switch IP address of the group, 
					otherwise this value is 0."
		::=  {  tpDeviceEntry  9  }
		
		
	memberTable	OBJECT-TYPE
		SYNTAX		SEQUENCE  OF  MemberEntry
		MAX-ACCESS	not-accessible
		STATUS		current
		DESCRIPTION	"Group member table.
				Only command switch support this item."
		::=  { memberManage  1 }

	memberEntry	OBJECT-TYPE
		SYNTAX		MemberEntry
		MAX-ACCESS	not-accessible
		STATUS		current
		DESCRIPTION	"Group member configuration.
				Only command switch support this item."
		INDEX		{  memMac  }
		::=  { memberTable 1 }

	MemberEntry  ::=  SEQUENCE {
		memMac  MacAddress,
		memId  Integer32,
		memIpAddr  IpAddress,
		memMask  IpAddress,
		memStatus  INTEGER,
		memRole  INTEGER,
		snmpPortMap  Unsigned32,
		httpPortMap  Integer32,
		ftpPortMap  Integer32,
		tftpPortMap  Integer32,
		telnetPortMap  Integer32,
		sshPortMap  Integer32
		}

	memMac	OBJECT-TYPE	
		SYNTAX			MacAddress
		MAX-ACCESS		read-only
		STATUS			current
		DESCRIPTION		"Group member MAC address."
		::=  {  memberEntry  1  }


	memId	OBJECT-TYPE	
		SYNTAX			Integer32
		MAX-ACCESS		read-only
		STATUS			current
		DESCRIPTION		"Group member id."
		::=  {  memberEntry  2  }


	memIpAddr	OBJECT-TYPE	
		SYNTAX			IpAddress
		MAX-ACCESS		read-only
		STATUS			current
		DESCRIPTION		"Group member IP address."
		::=  {  memberEntry  3  }


	memMask	OBJECT-TYPE	
		SYNTAX			IpAddress
		MAX-ACCESS		read-only
		STATUS			current
		DESCRIPTION		"Group member mask."
		::=  {  memberEntry  4  }


	memStatus	OBJECT-TYPE	
		SYNTAX			INTEGER  { up ( 1 ) , down ( 2 ) } 
		MAX-ACCESS		read-only
		STATUS			current
		DESCRIPTION		"Group member status."
		::=  {  memberEntry  5  }


	memRole	OBJECT-TYPE	
		SYNTAX			INTEGER  { memberSwitch ( 1 ) , candidateSwitch ( 2 ) } 
		MAX-ACCESS		read-write
		STATUS			current
		DESCRIPTION		"Group member switch role."
		::=  {  memberEntry  6  }


	snmpPortMap	OBJECT-TYPE	
		SYNTAX			Unsigned32
		MAX-ACCESS		read-only
		STATUS			current
		DESCRIPTION		"SNMP port map."
		::=  {  memberEntry  7  }


	httpPortMap	OBJECT-TYPE	
		SYNTAX			Integer32  ( -2147483648 .. 2147483647  ) 
		MAX-ACCESS		read-only
		STATUS			current
		DESCRIPTION		"HTTP port map."
		::=  {  memberEntry  8  }


	ftpPortMap	OBJECT-TYPE	
		SYNTAX			Integer32  ( -2147483648 .. 2147483647  ) 
		MAX-ACCESS		read-only
		STATUS			current
		DESCRIPTION		"FTP port map."
		::=  {  memberEntry  9  }


	tftpPortMap	OBJECT-TYPE	
		SYNTAX			Integer32  ( -2147483648 .. 2147483647  ) 
		MAX-ACCESS		read-only
		STATUS			current
		DESCRIPTION		"TFTP port map."
		::=  {  memberEntry  10  }


	telnetPortMap	OBJECT-TYPE	
		SYNTAX			Integer32
		MAX-ACCESS		read-only
		STATUS			current
		DESCRIPTION		"TELNET port map."
		::=  {  memberEntry  11  }


	sshPortMap	OBJECT-TYPE	
		SYNTAX			Integer32
		MAX-ACCESS		read-only
		STATUS			current
		DESCRIPTION		"SSH port map."
		::=  {  memberEntry  12  }

	gmTopologyChange	NOTIFICATION-TYPE
		STATUS			current
		DESCRIPTION		"This trap sended by command switch to notify topology change."
		::=  {  gmEnterpriseTrap  1  }

	gmMemberUpDown	NOTIFICATION-TYPE
		OBJECTS			{ memMac, memId, memIpAddr, memStatus }
		STATUS			current
		DESCRIPTION		"The trap indicates nms that member switch transfer between connect or disconnect with command switch."
		::=  {  gmEnterpriseTrap  2  }

END