All MIBs › ZXR10-ALARM-MIB › curAlarmTPIDLenSwitchFrom
curAlarmTPIDLenSwitchFrom
Module: ZXR10-ALARM-MIB
OID (symbolic): ZXR10-ALARM-MIB::curAlarmTPIDLenSwitchFrom
OID (numeric): 1.3.6.1.4.1.3902.3.302.1.1.32
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: The length of check point which switch from.
What is curAlarmTPIDLenSwitchFrom?
Read-only Unsigned32 giving the byte length of the curAlarmTPIDSwitchFrom check-point identifier for this protection-switching alarm.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.3.302.1.1.32 snmpwalk -v2c -c public <target> ZXR10-ALARM-MIB::curAlarmTPIDLenSwitchFrom
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.3.302.1.1.32.1 snmpget -v2c -c public <target> ZXR10-ALARM-MIB::curAlarmTPIDLenSwitchFrom.1
Start monitoring ZTE Corp. ZXR10 router platforms (alarm management) (active-alarm severity/root-cause status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZXR10-ALARM-MIB::curAlarmTPIDLenSwitchFrom OID value, configure state conditions and alerts, and monitor any ZTE Corp. ZXR10 router platforms (alarm management) (active-alarm severity/root-cause status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | DPI-MIB |
| 1.3.6.1.4.1.3902.3 | zxr10 | FANS-POWER-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.3.302 | zxr10AlarmMIB | ZXR10-ALARM-MIB |
| 1.3.6.1.4.1.3902.3.302.1 | curAlarmTable | ZXR10-ALARM-MIB |
| 1.3.6.1.4.1.3902.3.302.1.1 | curAlarmEntry | ZXR10-ALARM-MIB |
| 1.3.6.1.4.1.3902.3.302.1.1.32 | curAlarmTPIDLenSwitchFrom | ZXR10-ALARM-MIB |