ZTE-AN-INTERFACE-STATS-MIB :: zxAnLagIfSingleCollisions

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › ZTE-AN-INTERFACE-STATS-MIB › zxAnLagIfSingleCollisions

zxAnLagIfSingleCollisions

Module: ZTE-AN-INTERFACE-STATS-MIB

OID (symbolic): ZTE-AN-INTERFACE-STATS-MIB::zxAnLagIfSingleCollisions

OID (numeric): 1.3.6.1.4.1.3902.1082.30.31.2.4.1.41

Node type: OBJECT-TYPE

Type: Counter64

Access: read-only

Description: A count of frames that are involved in a single collision, and are subsequently transmitted successfully.

A frame that is counted by an instance of this object is also counted by the corresponding instance of either the ifOutUcastPkts, ifOutMulticastPkts, or ifOutBroadcastPkts, and is not counted by the corresponding instance of the dot3StatsMultipleCollisionFrames object.

This counter does not increment when the interface is operating in full-duplex mode.

Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

What is zxAnLagIfSingleCollisions?

A count of frames on this LAG that needed exactly one retransmission due to a collision before succeeding.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.1082.30.31.2.4.1.41
snmpwalk -v2c -c public <target> ZTE-AN-INTERFACE-STATS-MIB::zxAnLagIfSingleCollisions

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.1082.30.31.2.4.1.41.1
snmpget -v2c -c public <target> ZTE-AN-INTERFACE-STATS-MIB::zxAnLagIfSingleCollisions.1

Start monitoring ZTE Access Node (AN) broadband access / DSLAM-class equipment (Ethernet/bridge/LAG/VLAN traffic-statistics status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZTE-AN-INTERFACE-STATS-MIB::zxAnLagIfSingleCollisions OID value, configure state conditions and alerts, and monitor any ZTE Access Node (AN) broadband access / DSLAM-class equipment (Ethernet/bridge/LAG/VLAN traffic-statistics status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.3902zteDPI-MIB
1.3.6.1.4.1.3902.1082zxAccessNodeZTE-AN-SMI
1.3.6.1.4.1.3902.1082.30zxAnInterfaceZTE-AN-SMI
Numeric OIDNameModule
1.3.6.1.4.1.3902.1082.30.31zxAnInterfaceStatsMibZTE-AN-INTERFACE-STATS-MIB
1.3.6.1.4.1.3902.1082.30.31.2zxAnIfPerfObjectsZTE-AN-INTERFACE-STATS-MIB
1.3.6.1.4.1.3902.1082.30.31.2.4zxAnLagIfCurrStatsTableZTE-AN-INTERFACE-STATS-MIB
1.3.6.1.4.1.3902.1082.30.31.2.4.1zxAnLagIfCurrStatsEntryZTE-AN-INTERFACE-STATS-MIB
1.3.6.1.4.1.3902.1082.30.31.2.4.1.41zxAnLagIfSingleCollisionsZTE-AN-INTERFACE-STATS-MIB