All MIBs › ZTE-AN-INTERFACE-STATS-MIB › zxAnLagIfOutPausePkts
zxAnLagIfOutPausePkts
Module: ZTE-AN-INTERFACE-STATS-MIB
OID (symbolic): ZTE-AN-INTERFACE-STATS-MIB::zxAnLagIfOutPausePkts
OID (numeric): 1.3.6.1.4.1.3902.1082.30.31.2.4.1.39
Node type: OBJECT-TYPE
Type: Counter64
Access: read-only
Description: A count of MAC Control frames transmitted on this LAG interface with an opcode indicating the PAUSE operation.
This counter does not increment when the LAG interface is operating in half-duplex mode.
For interfaces operating at 10 Gb/s, this counter can roll over in less than 5 minutes if it is incrementing at its maximum rate. Since that amount of time could be less than a management station's poll cycle time, in order to avoid a loss of information, a management station is advised to poll the dot3HCOutPauseFrames object for 10 Gb/s or faster interfaces.
Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
What is zxAnLagIfOutPausePkts?
A count of 802.3x PAUSE flow-control frames transmitted on this LAG interface; only increments in full-duplex mode.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.1082.30.31.2.4.1.39 snmpwalk -v2c -c public <target> ZTE-AN-INTERFACE-STATS-MIB::zxAnLagIfOutPausePkts
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.1082.30.31.2.4.1.39.1 snmpget -v2c -c public <target> ZTE-AN-INTERFACE-STATS-MIB::zxAnLagIfOutPausePkts.1
Start monitoring ZTE Access Node (AN) broadband access / DSLAM-class equipment (Ethernet/bridge/LAG/VLAN traffic-statistics status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZTE-AN-INTERFACE-STATS-MIB::zxAnLagIfOutPausePkts OID value, configure state conditions and alerts, and monitor any ZTE Access Node (AN) broadband access / DSLAM-class equipment (Ethernet/bridge/LAG/VLAN traffic-statistics status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | DPI-MIB |
| 1.3.6.1.4.1.3902.1082 | zxAccessNode | ZTE-AN-SMI |
| 1.3.6.1.4.1.3902.1082.30 | zxAnInterface | ZTE-AN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.1082.30.31 | zxAnInterfaceStatsMib | ZTE-AN-INTERFACE-STATS-MIB |
| 1.3.6.1.4.1.3902.1082.30.31.2 | zxAnIfPerfObjects | ZTE-AN-INTERFACE-STATS-MIB |
| 1.3.6.1.4.1.3902.1082.30.31.2.4 | zxAnLagIfCurrStatsTable | ZTE-AN-INTERFACE-STATS-MIB |
| 1.3.6.1.4.1.3902.1082.30.31.2.4.1 | zxAnLagIfCurrStatsEntry | ZTE-AN-INTERFACE-STATS-MIB |
| 1.3.6.1.4.1.3902.1082.30.31.2.4.1.39 | zxAnLagIfOutPausePkts | ZTE-AN-INTERFACE-STATS-MIB |