All MIBs › ZTE-AN-INTERFACE-STATS-MIB › zxAnLagIfOutCollisions
zxAnLagIfOutCollisions
Module: ZTE-AN-INTERFACE-STATS-MIB
OID (symbolic): ZTE-AN-INTERFACE-STATS-MIB::zxAnLagIfOutCollisions
OID (numeric): 1.3.6.1.4.1.3902.1082.30.31.2.4.1.40
Node type: OBJECT-TYPE
Type: Counter64
Access: read-only
Description: A count of frames that are involved in out collision and are subsequently transmitted successfully.
A frame that is counted by an instance of this object is also counted by the corresponding instance of either the ifOutUcastPkts, ifOutMulticastPkts, or ifOutBroadcastPkts, and is not counted by the corresponding instance of the dot3StatsSingleCollisionFrames object.
This counter does not increment when the interface is operating in full-duplex mode.
Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.
What is zxAnLagIfOutCollisions?
A count of frames on this LAG that experienced a collision but were still transmitted successfully afterward; only increments in half-duplex mode, so any nonzero value here on a modern full-duplex LAG member is unexpected.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.1082.30.31.2.4.1.40 snmpwalk -v2c -c public <target> ZTE-AN-INTERFACE-STATS-MIB::zxAnLagIfOutCollisions
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.1082.30.31.2.4.1.40.1 snmpget -v2c -c public <target> ZTE-AN-INTERFACE-STATS-MIB::zxAnLagIfOutCollisions.1
Start monitoring ZTE Access Node (AN) broadband access / DSLAM-class equipment (Ethernet/bridge/LAG/VLAN traffic-statistics status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZTE-AN-INTERFACE-STATS-MIB::zxAnLagIfOutCollisions OID value, configure state conditions and alerts, and monitor any ZTE Access Node (AN) broadband access / DSLAM-class equipment (Ethernet/bridge/LAG/VLAN traffic-statistics status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | DPI-MIB |
| 1.3.6.1.4.1.3902.1082 | zxAccessNode | ZTE-AN-SMI |
| 1.3.6.1.4.1.3902.1082.30 | zxAnInterface | ZTE-AN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.1082.30.31 | zxAnInterfaceStatsMib | ZTE-AN-INTERFACE-STATS-MIB |
| 1.3.6.1.4.1.3902.1082.30.31.2 | zxAnIfPerfObjects | ZTE-AN-INTERFACE-STATS-MIB |
| 1.3.6.1.4.1.3902.1082.30.31.2.4 | zxAnLagIfCurrStatsTable | ZTE-AN-INTERFACE-STATS-MIB |
| 1.3.6.1.4.1.3902.1082.30.31.2.4.1 | zxAnLagIfCurrStatsEntry | ZTE-AN-INTERFACE-STATS-MIB |
| 1.3.6.1.4.1.3902.1082.30.31.2.4.1.40 | zxAnLagIfOutCollisions | ZTE-AN-INTERFACE-STATS-MIB |