ZTE-AN-INTERFACE-STATS-MIB :: zxAnLagIfMultipleCollisions

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › ZTE-AN-INTERFACE-STATS-MIB › zxAnLagIfMultipleCollisions

zxAnLagIfMultipleCollisions

Module: ZTE-AN-INTERFACE-STATS-MIB

OID (symbolic): ZTE-AN-INTERFACE-STATS-MIB::zxAnLagIfMultipleCollisions

OID (numeric): 1.3.6.1.4.1.3902.1082.30.31.2.4.1.42

Node type: OBJECT-TYPE

Type: Counter64

Access: read-only

Description: A count of frames that are involved in more than one collision and are subsequently transmitted successfully.

A frame that is counted by an instance of this object is also counted by the corresponding instance of either the ifOutUcastPkts, ifOutMulticastPkts, or ifOutBroadcastPkts, and is not counted by the corresponding instance of the dot3StatsSingleCollisionFrames object.

This counter does not increment when the interface is operating in full-duplex mode.

Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime.

What is zxAnLagIfMultipleCollisions?

A count of frames on this LAG that needed more than one retransmission due to collisions before succeeding.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.1082.30.31.2.4.1.42
snmpwalk -v2c -c public <target> ZTE-AN-INTERFACE-STATS-MIB::zxAnLagIfMultipleCollisions

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.1082.30.31.2.4.1.42.1
snmpget -v2c -c public <target> ZTE-AN-INTERFACE-STATS-MIB::zxAnLagIfMultipleCollisions.1

Start monitoring ZTE Access Node (AN) broadband access / DSLAM-class equipment (Ethernet/bridge/LAG/VLAN traffic-statistics status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZTE-AN-INTERFACE-STATS-MIB::zxAnLagIfMultipleCollisions OID value, configure state conditions and alerts, and monitor any ZTE Access Node (AN) broadband access / DSLAM-class equipment (Ethernet/bridge/LAG/VLAN traffic-statistics status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.3902zteDPI-MIB
1.3.6.1.4.1.3902.1082zxAccessNodeZTE-AN-SMI
1.3.6.1.4.1.3902.1082.30zxAnInterfaceZTE-AN-SMI
Numeric OIDNameModule
1.3.6.1.4.1.3902.1082.30.31zxAnInterfaceStatsMibZTE-AN-INTERFACE-STATS-MIB
1.3.6.1.4.1.3902.1082.30.31.2zxAnIfPerfObjectsZTE-AN-INTERFACE-STATS-MIB
1.3.6.1.4.1.3902.1082.30.31.2.4zxAnLagIfCurrStatsTableZTE-AN-INTERFACE-STATS-MIB
1.3.6.1.4.1.3902.1082.30.31.2.4.1zxAnLagIfCurrStatsEntryZTE-AN-INTERFACE-STATS-MIB
1.3.6.1.4.1.3902.1082.30.31.2.4.1.42zxAnLagIfMultipleCollisionsZTE-AN-INTERFACE-STATS-MIB