ZHONE-COM-VOIP-MIB :: zhoneVoipServerRtpTermIdSyntax

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsZHONE-COM-VOIP-MIBzhoneVoipServerRtpTermIdSyntax

zhoneVoipServerRtpTermIdSyntax

Module: ZHONE-COM-VOIP-MIB

OID (symbolic): ZHONE-COM-VOIP-MIB::zhoneVoipServerRtpTermIdSyntax

OID (numeric): 1.3.6.1.4.1.5504.4.3.4.6.1.1.26

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-write

Description: This field describes the Ephemeral term ID syntax for the switch. The RTP syntax varies from switch to switch.But the string should contain atleast one %eid format, eg %eid . This field is supported only for the Megaco protocol for all other protocols this field will be initialized to NULL. If the protocol is megaco and the field is NULL, Ephemeral term id will be updated to default syntax of the server Id given. If the server Id is not provisioned with the default id then field will be updated to NULL.

What is zhoneVoipServerRtpTermIdSyntax?

Holds the ephemeral termination-ID syntax template (containing at least one '%eid' placeholder) used for Megaco signalling to this VOIP server; it's meaningful only for the Megaco protocol and stays NULL for other protocols. If left NULL under Megaco, the device falls back to the default syntax for the configured zhoneVoipServerId, or to NULL if that server type has no default defined.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5504.4.3.4.6.1.1.26
snmpwalk -v2c -c public <target> ZHONE-COM-VOIP-MIB::zhoneVoipServerRtpTermIdSyntax

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.5504.4.3.4.6.1.1.26.1
snmpget -v2c -c public <target> ZHONE-COM-VOIP-MIB::zhoneVoipServerRtpTermIdSyntax.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.5504.4.3.4.6.1.1.26.1 s <value>

Start monitoring Zhone VoIP CPE and access gateways (SIP-registration/RTP/dial-plan config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZHONE-COM-VOIP-MIB::zhoneVoipServerRtpTermIdSyntax OID value, configure state conditions and alerts, and monitor any Zhone VoIP CPE and access gateways (SIP-registration/RTP/dial-plan config status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.5504zhoneZhone
1.3.6.1.4.1.5504.4zhoneCommunicationProtocolsZhone
1.3.6.1.4.1.5504.4.3zhoneVoiceZhone
Numeric OIDNameModule
1.3.6.1.4.1.5504.4.3.4zhoneVoipZHONE-COM-VOIP-MIB
1.3.6.1.4.1.5504.4.3.4.6zhoneVoipServerCfgZHONE-COM-VOIP-MIB
1.3.6.1.4.1.5504.4.3.4.6.1zhoneVoipServerTableZHONE-COM-VOIP-MIB
1.3.6.1.4.1.5504.4.3.4.6.1.1zhoneVoipServerEntryZHONE-COM-VOIP-MIB
1.3.6.1.4.1.5504.4.3.4.6.1.1.26zhoneVoipServerRtpTermIdSyntaxZHONE-COM-VOIP-MIB