XIRRUS-MIB

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › XIRRUS-MIB

Organization: Xirrus

Last Updated: 2013-07-30

Category: Wireless LAN Management

Description: Manages Xirrus Wi-Fi array configuration, associated client statistics, and RF environment monitoring.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is XIRRUS-MIB?

XIRRUS-MIB is the top-level enterprise MIB tree for Xirrus Wi-Fi array access points, a vendor known for multi-radio Wi-Fi arrays aimed at high-density enterprise wireless deployments. As the root of Xirrus's private enterprise OID branch, it organizes the vendor's wireless LAN management objects covering array/radio configuration, per-client association statistics, and RF environment (channel, interference, signal) monitoring. Its practical monitoring role centers on wireless network health: tracking associated client counts and signal quality, radio/channel utilization, and array hardware/software status such as uptime and firmware version, which together reveal RF congestion, rogue interference, or failing radios before they degrade user experience. Because only the root OID tree is given here without specific object leaves, this entry represents the vendor namespace rather than a single functional table, and it likely works alongside standard dot11 (IEEE 802.11) and IF-MIB objects for baseline interface counters. It is deployed on Xirrus multi-radio Wi-Fi array access points and their wireless array controllers in enterprise campus and high-density venue Wi-Fi installations, where XIRRUS-MIB SNMP monitoring gives network teams visibility into per-radio client load and RF interference.

IPNetwork Monitor allows you to monitor SNMP objects defined in XIRRUS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

  • Xirrus Wi-Fi array access point / wireless array controller

Monitoring Examples

No concrete object or table names were provided for this module beyond the root enterprise OID, so a specific polling scenario cannot be described without inventing object names; in practice, network teams using Xirrus arrays would walk the vendor's array/radio and client-association subtrees under this root to check per-radio client load and RF interference levels.

Imported Objects

From SNMPv2-SMI

Counter32
Counter64
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
enterprises

From SNMPv2-TC

DisplayString
MacAddress
RowStatus

How to Use in IPNetwork Monitor

Example using filterPackets OID:

Select a Xirrus Wi-Fi array access point / wireless array controller (enterprise OID root, no direct runtime data) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type filterPackets into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The number of packets that matched the filter. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs

RFC description

Manages Xirrus wireless arrays (Wi-Fi access points and controllers). Provides configuration and monitoring of SSID, security, VLAN, and traffic statistics.

Start monitoring Xirrus Wi-Fi array access point / wireless array controller (enterprise OID root, no direct runtime data) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download XIRRUS-MIB