All MIBs › XEROX-JOB-MONITORING-MIB › xcmJobOctetsCompletedHigh
xcmJobOctetsCompletedHigh
Module: XEROX-JOB-MONITORING-MIB
OID (symbolic): XEROX-JOB-MONITORING-MIB::xcmJobOctetsCompletedHigh
OID (numeric): 1.3.6.1.4.1.253.8.59.10.1.1.12
Node type: OBJECT-TYPE
Type: Cardinal64High
Access: read-only
Description: For the Job Monitoring MIB: two objects are used to represent a full 62-bit value. The sign bit of each half is not used. This object is generalized for use with input devices as well.
ISO DPA: Octets-completed [high 31 bits] This attribute indicates the number of octets of the job that the printer(s) [devices(s)] have completed printing [processing]. The server shall not reset its value during the processing of multiple copies of documents or the job. Since this attribute is intended to measure the progress of a job, the value shall include repeated pages due to multiple copies.
The accuracy of this value is implementation-dependent. It may be approximated by the number of octets conveyed to the
printer [device]. This attribute may not be supported for all printers and all page description languages.
The value of this attribute shall be 0 if the device has not started this job.
What is xcmJobOctetsCompletedHigh?
This read-only object holds the high-order 31 bits of a combined 62-bit octet count of data the device has completed processing for the job (paired with xcmJobOctetsCompletedLow), generalized to cover input (e.g. scanning) devices as well as printing. An admin combines this with the low half to get an accurate byte-count progress indicator for a very large job that a single 32-bit counter couldn't represent.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.253.8.59.10.1.1.12 snmpwalk -v2c -c public <target> XEROX-JOB-MONITORING-MIB::xcmJobOctetsCompletedHigh
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.253.8.59.10.1.1.12.1 snmpget -v2c -c public <target> XEROX-JOB-MONITORING-MIB::xcmJobOctetsCompletedHigh.1
Start monitoring Xerox network printers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the XEROX-JOB-MONITORING-MIB::xcmJobOctetsCompletedHigh OID value, configure state conditions and alerts, and monitor any Xerox network printers from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.253 | xerox | XEROX-COMMON-MIB |
| 1.3.6.1.4.1.253.8 | xeroxCommonMIB | XEROX-COMMON-MIB |
| 1.3.6.1.4.1.253.8.59 | xcmJobMonMIB | XEROX-COMMON-MIB |
| 1.3.6.1.4.1.253.8.59.10 | xcmJobGenExt | XEROX-COMMON-MIB |
| 1.3.6.1.4.1.253.8.59.10.1 | xcmJobGenExtTable | XEROX-COMMON-MIB |
| 1.3.6.1.4.1.253.8.59.10.1.1 | xcmJobGenExtEntry | XEROX-COMMON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.253.8.59.10.1.1.12 | xcmJobOctetsCompletedHigh | XEROX-JOB-MONITORING-MIB |