All MIBs › XDLC-OPT-MIB
Category: X.25 and Legacy WAN
Description: Defines optional objects for XDLC data link control protocol configuration and performance monitoring.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is XDLC-OPT-MIB?
XDLC-OPT-MIB defines optional conformance groups for XDLC (an SDLC-family extended data link control protocol) data-link management, specifically the primary- and secondary-station protocol object groups (cdx6500PCTStationProtocolGroup, cdx6500PSTStationProtocolGroup) for cdx6500-series communications equipment. It belongs to the legacy WAN/SNA data-link-control management category. As an "OPT" (optional groups) module, its content is conformance/agent-capability grouping rather than a set of runtime data objects itself — it groups together which primary-station and secondary-station XDLC protocol objects an agent implementation must support, rather than exposing hardware sensors or counters directly. Its monitoring value is therefore indirect: the base XDLC MIB (to which this module's groups apply) would expose link-level status and statistics for SDLC/XDLC stations, and this module simply defines which of those objects are grouped as optional conformance for cdx6500 devices. It has a clear dependency on a base XDLC MIB module defining the actual station protocol objects being grouped, and on SNMPv2 conformance (OBJECT-GROUP) conventions, and would be deployed alongside cdx6500-series SNA/SDLC gateway or front-end-processor hardware in legacy mainframe-connectivity WAN environments, where administrators can download the XDLC-OPT-MIB file directly to load its conformance groups into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in XDLC-OPT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- cdx6500-series SDLC/XDLC data-link-control equipment (legacy SNA gateway/FEP hardware)
Monitoring Examples
This module's only sample objects are cdx6500PCTStationProtocolGroup and cdx6500PSTStationProtocolGroup, which are OBJECT-GROUP conformance groupings for primary- and secondary-station XDLC protocol objects on cdx6500-series equipment — it is a conformance module, not a source of runtime data objects, so there is no monitoring scenario to describe honestly beyond noting which optional groups an agent implements. Actual polling of link status/counters would occur against the base XDLC MIB objects these groups reference, not against this module itself.
This MIB depends on
Related MIBs
Imported Objects
From RFC-1212
| OBJECT-TYPE |
From RFC1155-SMI
| Counter | |
| Gauge | |
| IpAddress | |
| NetworkAddress | |
| TimeTicks | |
| enterprises | |
| mgmt |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| codex | 1.3.6.1.4.1.449 | |||
| cdxProductSpecific | 1.3.6.1.4.1.449.2 | |||
| cdx6500 | 1.3.6.1.4.1.449.2.1 | |||
| cdx6500Configuration | 1.3.6.1.4.1.449.2.1.2 | |||
| cdx6500CfgProtocolGroup | 1.3.6.1.4.1.449.2.1.2.1 | |||
| cdx6500PCTPortProtocolGroup | 1.3.6.1.4.1.449.2.1.2.1.1 | |||
| cdx6500PPCTXDLCPortTable | 1.3.6.1.4.1.449.2.1.2.1.1.13 | not-accessible | All of the configuration parameters relevant to the XDLC port table. | |
| cdx6500PPCTXDLCPortEntry | 1.3.6.1.4.1.449.2.1.2.1.1.13.1 | not-accessible | A row of XDLC Port configuration parameters. | |
| INT cdx6500xdlcpCfgPortNumber | 1.3.6.1.4.1.449.2.1.2.1.1.13.1.1 | INTEGER | read-only | XDLC Port Number. |
| STR cdx6500xdlcpPortControl | 1.3.6.1.4.1.449.2.1.2.1.1.13.1.2 | DisplayString | read-only | Specify any of the following port control options: NONE - no option specified. MB - raise Pin 22 when the port becomes disabled. |
| INT cdx6500xdlcpTxCoding | 1.3.6.1.4.1.449.2.1.2.1.1.13.1.3 | INTEGER | read-only | This is the data encoding used on the XDLC link. nrz - Non Return to Zero. nrzi - Non Return to Zero Inverted. newvalNrz - same functionality as 'nrz', new enumeration added for RFC1155 compatibility. |
| INT cdx6500xdlcpLineType | 1.3.6.1.4.1.449.2.1.2.1.1.13.1.4 | INTEGER | read-only | Type of line, indicates whether half duplex or full duplex signals are being generated. fdx - communications occuring in both directions simultaneously between devices. Only Full Duplex operation is currently supported. |
| INT cdx6500xdlcpTxType | 1.3.6.1.4.1.449.2.1.2.1.1.13.1.5 | INTEGER | read-only | This is the transmission mode used on the line. twa - Two Way Alternate used by most controllers. tws - Two Way Simultaneous. newvalTws - same functionality as 'tws', new enumeration added for RFC1155 compatibility. |
| INT cdx6500xdlcpClockSource | 1.3.6.1.4.1.449.2.1.2.1.1.13.1.6 | INTEGER | read-only | int - Internal clock source. ext - External clock source. newvalInt - same functionality as 'int', new enumeration added for RFC1155 compatibility. |
| INT cdx6500xdlcpClockSpeed | 1.3.6.1.4.1.449.2.1.2.1.1.13.1.7 | INTEGER | read-only | This is the speed of the port in bits per second, when using internal clocking. |
| INT cdx6500xdlcpStationCnt | 1.3.6.1.4.1.449.2.1.2.1.1.13.1.8 | INTEGER | read-only | This is the number of stations on the XDLC line. |
| INT cdx6500xdlcpPollTimer | 1.3.6.1.4.1.449.2.1.2.1.1.13.1.9 | INTEGER | read-only | Worst case delay for a slave to respond to a poll frame sent by the master, including modem turn around time, etc. Value in 10ths of second ( 30 = 3.0 seconds ). |
| INT cdx6500xdlcpPollPeriod | 1.3.6.1.4.1.449.2.1.2.1.1.13.1.10 | INTEGER | read-only | Time in milliseconds between polls when no data is exchanged. |
| INT cdx6500xdlcpTries | 1.3.6.1.4.1.449.2.1.2.1.1.13.1.11 | INTEGER | read-only | Maximum number of attempts to complete a transmission. |
| STR cdx6500xdlcpPortOptions | 1.3.6.1.4.1.449.2.1.2.1.1.13.1.12 | DisplayString | read-only | Select options on this XDLC port as follows: NONE - no option specified. |
| STR cdx6500xdlcpPortAddress | 1.3.6.1.4.1.449.2.1.2.1.1.13.1.13 | DisplayString | read-only | When an XDLC port makes a call, this address is inserted into the calling address field. |
| INT cdx6500xdlcpRestartTimer | 1.3.6.1.4.1.449.2.1.2.1.1.13.1.14 | INTEGER | read-only | Restart-Request timeout timer in seconds. If timer expires, request is sent again. |
| INT cdx6500xdlcpResetTimer | 1.3.6.1.4.1.449.2.1.2.1.1.13.1.15 | INTEGER | read-only | Reset-Request timeout timer in seconds. If timer expires, request is sent again. |
| INT cdx6500xdlcpCallTimer | 1.3.6.1.4.1.449.2.1.2.1.1.13.1.16 | INTEGER | read-only | Call-Request timeout timer in seconds. If timer expires, call is cleared. |
| INT cdx6500xdlcpClearTimer | 1.3.6.1.4.1.449.2.1.2.1.1.13.1.17 | INTEGER | read-only | Clear-Request timeout timer in seconds. If timer expires, request is sent again. |
| INT cdx6500xdlcpMaxFrameSize | 1.3.6.1.4.1.449.2.1.2.1.1.13.1.18 | INTEGER | read-only | Maximum size (in bytes) of a frame, excluding the frame header and CRC for SDLC frames. This parameter is Not effective on MX25 type stations. |
| INT cdx6500xdlcpElectricalInterfaceType | 1.3.6.1.4.1.449.2.1.2.1.1.13.1.19 | INTEGER | read-only | Specify the Electrical Interface Type: V.24 - V.24 Electrical Interface Type V.35 - V.35 Electrical Interface Type V.36 - V.36 Electrical Interface Type X.21 - X.21 Electrical Interface Type NONE - Electrically disabled |
| INT cdx6500xdlcpV24ElectricalInterfaceOption | 1.3.6.1.4.1.449.2.1.2.1.1.13.1.20 | INTEGER | read-only | Specify the Pin 22 option: RI - V.24 uses Pin 22 for Ring Indicator output signal TM - V.24 uses Pin 22 for Test Mode input signal |
| INT cdx6500xdlcpHighSpeedElectricalInterfaceOption | 1.3.6.1.4.1.449.2.1.2.1.1.13.1.21 | INTEGER | read-only | Specify the cable type: NONE - V.35/V.36/X.21 DCE with straight through cable XOVER - V.35/V.36/X.21 DCE with crossover adapter cable |
| cdx6500PCTStationProtocolGroup | 1.3.6.1.4.1.449.2.1.2.1.3 | |||
| cdx6500SPCTXDLCStationTable | 1.3.6.1.4.1.449.2.1.2.1.3.5 | |||
| cdx6500SPCTXDLCStnTable | 1.3.6.1.4.1.449.2.1.2.1.3.5.1 | not-accessible | All of the configuration parameters relevant to the XDLC station table. | |
| cdx6500SPCTXDLCStnEntry | 1.3.6.1.4.1.449.2.1.2.1.3.5.1.1 | not-accessible | A row of XDLC station configuration parameters. | |
| INT cdx6500xdlcsCfgPortNumber | 1.3.6.1.4.1.449.2.1.2.1.3.5.1.1.1 | INTEGER | read-only | XDLC Port Number. |
| INT cdx6500xdlcsCfgStationNumber | 1.3.6.1.4.1.449.2.1.2.1.3.5.1.1.2 | INTEGER | read-only | The number of the station on the multidrop line. Also used for routing purposes. |
| INT cdx6500xdlcsStationType | 1.3.6.1.4.1.449.2.1.2.1.3.5.1.1.3 | INTEGER | read-only | Enter the type of station to configure. sdlc - SDLC Station. mx25 - MX25 Station. newvalSdlc - same functionality as 'sdlc', new enumeration added for RFC1155 compatibility. |
| cdx6500SPCTXDLCSDLCStnTable | 1.3.6.1.4.1.449.2.1.2.1.3.5.2 | not-accessible | All of the configuration parameters relevant to the XDLC SDLC station table. | |
| cdx6500SPCTXDLCSDLCStnEntry | 1.3.6.1.4.1.449.2.1.2.1.3.5.2.1 | not-accessible | A row of XDLC SDLC station configuration parameters. | |
| INT cdx6500xdlcsdlcCfgPortNum | 1.3.6.1.4.1.449.2.1.2.1.3.5.2.1.1 | INTEGER | read-only | XDLC Port Number. |
| INT cdx6500xdlcsdlcCfgStationNum | 1.3.6.1.4.1.449.2.1.2.1.3.5.2.1.2 | INTEGER | read-only | The number of the station on the multidrop line. Also used for routing purposes. |
| STR cdx6500xdlcsdlcStationAddress | 1.3.6.1.4.1.449.2.1.2.1.3.5.2.1.3 | DisplayString | read-only | The station address on the multidrop line. |
| INT cdx6500xdlcsdlcFrameWinSize | 1.3.6.1.4.1.449.2.1.2.1.3.5.2.1.4 | INTEGER | read-only | Frame level window size must be set to the same value in devices at each end of the link. |
| STR cdx6500xdlcsdlcAutocallMnem | 1.3.6.1.4.1.449.2.1.2.1.3.5.2.1.5 | DisplayString | read-only | This mnemonic references the remote address which will be called when polling activity is detected on the sdlc line. |
| STR cdx6500xdlcsdlcProtocolID | 1.3.6.1.4.1.449.2.1.2.1.3.5.2.1.6 | DisplayString | read-only | The protocol identifier is the first four bytes of the call user data. If not configured the PAD will use C3000000 as the protocol ID in the call. |
| STR cdx6500xdlcsdlcCUG | 1.3.6.1.4.1.449.2.1.2.1.3.5.2.1.7 | DisplayString | read-only | The station may be a member of up to 8 different Closed User Groups (CUGs). Each CUG membership must be a two digit number, separated by a comma. (e.g. 12,34,56,09,02,03). Two hyphens following each other indicate no CUG Membership. 00-99 - CUG Membership. |
| STR cdx6500xdlcsdlcOptions | 1.3.6.1.4.1.449.2.1.2.1.3.5.2.1.8 | DisplayString | read-only | Select options on this SDLC station as follows: NONE - no option specified CUG - check closed user group in incoming calls, and insert closed user group facility in outgoing calls. QRRs - HPAD sends QRR after QLLC link comes up XIDs - TPAD responds to QXIDs with XID configured for this station. XIDs are not sent to the Cluster Controller. XID3 - HPAD and TPAD will pass XIDs transparently, This option should not be set if XIDs option is selected. Corresponding station options must be XID3. DISCs - TPAD sends a DISC frame when station goes down. The DISC may be retransmitted up to Tries times, if the Cluster Controller does not respond, before sending a SNRM. RNRs - TPAD initially polls with RNR until a data packet or an QRR is received by the QLLC station on the TPAD side. DFC - the station will wait the amount of time specified by the call timer before placing the first call. |
| STR cdx6500xdlcsdlcXID | 1.3.6.1.4.1.449.2.1.2.1.3.5.2.1.9 | DisplayString | read-only | With this option selected, the TPAD's response to a QXID will contain the XID identification value defined in this parameter instead of from an exchange of identifications with the cluster controller. XIDs are not sent to the cluster controller. |
| STR cdx6500xdlcsdlcStnSubaddress | 1.3.6.1.4.1.449.2.1.2.1.3.5.2.1.10 | DisplayString | read-only | The calling subaddress is appended to the port address to create the calling address in the autocall generated. |
| INT cdx6500xdlcsdlcBillingRecords | 1.3.6.1.4.1.449.2.1.2.1.3.5.2.1.11 | INTEGER | read-only | This controls whether billing (accounting) records will be created for calls on this port. newvalOff - same functionality as 'off', new enumeration added for RFC1155 compatibility. |
| INT cdx6500xdlcsdlcProtectionLevel | 1.3.6.1.4.1.449.2.1.2.1.3.5.2.1.12 | INTEGER | read-only | This specifies the level of data or connection protection which will be applied to calls to or from this port. The actual level for a call will be negotiated to the lesser of this level and the level configured for the other end of the call. none - No protection. cpOnly - Connection protection only. fullDcp - Full data and connection protection. newvalNone - same functionality as 'none', new enumeration added for RFC1155 compatibility. |
| INT cdx6500xdlcsdlcReconnectTimeout | 1.3.6.1.4.1.449.2.1.2.1.3.5.2.1.13 | INTEGER | read-only | This specifies the number of seconds that DCP on the originating side will wait between reconnection attempts. |
| INT cdx6500xdlcsdlcReconnectLimit | 1.3.6.1.4.1.449.2.1.2.1.3.5.2.1.14 | INTEGER | read-only | This specifies the number of times that DCP on the originating side will attempt to reconnect before clearing the call. If 0 is entered, it will not attempt to reconnect. |
| INT cdx6500xdlcsdlcCallTimer | 1.3.6.1.4.1.449.2.1.2.1.3.5.2.1.15 | INTEGER | read-only | This specifies the time before the next call is made. If 0 is entered, the time to the next call is handled internally. The time is in seconds. |
| INT cdx6500xdlcsdlcIdleTimer | 1.3.6.1.4.1.449.2.1.2.1.3.5.2.1.16 | INTEGER | read-only | The Link Idle Timer is used by the SNA Dial on Demand feature for determining how long the station should wait for a data frame before bringing the X.25 call down. If a 0 is entered, the call will never be brought down. The time is in seconds. |
| INT cdx6500xdlcsdlcVerConnTimer | 1.3.6.1.4.1.449.2.1.2.1.3.5.2.1.17 | INTEGER | read-only | The Verify Connection Timer is used by the SNA Dial on Demand feature for periodically verifying that the connection to the remote station is still active, after the link has been suspended. The timer specifies how long the the station waits before verifying the connection. If a 0 is entered, the connection will never be verified. The time is in seconds. |
| INT cdx6500xdlcsdlcUnsusWaitTimer | 1.3.6.1.4.1.449.2.1.2.1.3.5.2.1.18 | INTEGER | read-only | The Unsuspend Wait Timer is used by the SNA Dial on Demand feature for determining how long the station will wait in LINK-UNSUSPENDING state after receiving a call request before bringing the station down. If a 0 is entered, the station waits in LINK-UNSUSPENDED state forever. Time is in seconds. |
| cdx6500SPCTXDLCMX25StnTable | 1.3.6.1.4.1.449.2.1.2.1.3.5.3 | not-accessible | All of the configuration parameters relevant to the XDLC MX.25 station table. | |
| cdx6500SPCTXDLCMX25StnEntry | 1.3.6.1.4.1.449.2.1.2.1.3.5.3.1 | not-accessible | A row of XDLC MX.25 station configuration parameters. | |
| INT cdx6500xdlcmx25CfgPortNum | 1.3.6.1.4.1.449.2.1.2.1.3.5.3.1.1 | INTEGER | read-only | XDLC Port Number. |
| INT cdx6500xdlcmx25CfgStationNum | 1.3.6.1.4.1.449.2.1.2.1.3.5.3.1.2 | INTEGER | read-only | The number of the station on the multidrop line. Also used for routing purposes. |
| STR cdx6500xdlcmx25StationAddress | 1.3.6.1.4.1.449.2.1.2.1.3.5.3.1.3 | DisplayString | read-only | The station address on the multidrop line. |
| INT cdx6500xdlcmx25PVCChannels | 1.3.6.1.4.1.449.2.1.2.1.3.5.3.1.4 | INTEGER | read-only | Number of logical channels used for Permanent Virtual Circuits. The total number of PVC and SVC channels on a link should be kept as small as possible and consistent with needs. PVC connections must be configured in the PVC Table. |
| INT cdx6500xdlcmx25StartingPVC | 1.3.6.1.4.1.449.2.1.2.1.3.5.3.1.5 | INTEGER | read-only | This is the starting logical channel number for the Permanent Virtual Circuits on this link. Not used if the number of PVCs = 0. |
| INT cdx6500xdlcmx25SVCChannels | 1.3.6.1.4.1.449.2.1.2.1.3.5.3.1.6 | INTEGER | read-only | Number of logical channels used in Switched Virtual Circuits. The total number of PVC and SVC channels on a link should be kept as small as possible and consistent with needs. |
| INT cdx6500xdlcmx25StartingSVC | 1.3.6.1.4.1.449.2.1.2.1.3.5.3.1.7 | INTEGER | read-only | This is the starting logical channel number for the Switched Virtual Circuits on this link. Not used if the number of SVCs = 0. |
| INT cdx6500xdlcmx25FrameWinSize | 1.3.6.1.4.1.449.2.1.2.1.3.5.3.1.8 | INTEGER | read-only | Frame level window size must be set to the same value in devices at each end of the link. |
| INT cdx6500xdlcmx25PacketWinSize | 1.3.6.1.4.1.449.2.1.2.1.3.5.3.1.9 | INTEGER | read-only | Packet level window size must be set to the same value in devices at each end of the link. |
| STR cdx6500xdlcmx25Options | 1.3.6.1.4.1.449.2.1.2.1.3.5.3.1.10 | DisplayString | read-only | Select options on this MX.25 port as follows: NONE - no option specified. HOLD - hold calls over link restart. CUG - check closed user group; otherwise, CUG passes transparently. INL - inter-node link. Link goes to another 6500 device. DELAY - enable delay path trace on this link. (link must be connected to Rel. 4.xx node) Any combination of the above specified by summing (e.g. HOLD+CUG+. . .). |
| STR cdx6500xdlcmx25RCDestination | 1.3.6.1.4.1.449.2.1.2.1.3.5.3.1.11 | DisplayString | read-only | All calls entering this port will be routed to the destination specified in this parameter, irrespective of route selection table entries. For example, to route calls to port 1, use P1. To route calls to port 2, station 4, use P2S4. Blank this field to disable this function. |
| STR cdx6500xdlcmx25CUG | 1.3.6.1.4.1.449.2.1.2.1.3.5.3.1.12 | DisplayString | read-only | The port may be a member of up to 8 different Closed User Groups (CUGs). Each CUG membership must be a two digit number (except --) and separated by a comma. (e.g. 12,34,56,09,02,03). -- - No CUG Membership 00-99 - CUG Membership |
| INT cdx6500xdlcmx25BillingRecords | 1.3.6.1.4.1.449.2.1.2.1.3.5.3.1.13 | INTEGER | read-only | This controls whether billing (accounting) records will be created for calls on this port. newvalOff - same functionality as 'off', new enumeration added for RFC1155 compatibility. |
| INT cdx6500xdlcmx25UpperQueue | 1.3.6.1.4.1.449.2.1.2.1.3.5.3.1.14 | INTEGER | read-only | This is the maximum number of data packets a channel on this port will queue for transmission before invoking flow control to the attached channel. |
| INT cdx6500xdlcmx25LowerQueue | 1.3.6.1.4.1.449.2.1.2.1.3.5.3.1.15 | INTEGER | read-only | This is the number of data packets a channel on this port will have queued for transmission when it releases flow control to the attached channel. |
| cdx6500Statistics | 1.3.6.1.4.1.449.2.1.3 | |||
| cdx6500StatProtocolGroup | 1.3.6.1.4.1.449.2.1.3.1 | |||
| cdx6500PSTPortProtocolGroup | 1.3.6.1.4.1.449.2.1.3.1.1 | |||
| cdx6500PPSTXDLCPortTable | 1.3.6.1.4.1.449.2.1.3.1.1.13 | not-accessible | All of the statistics parameters relevant to the XDLC Port table. | |
| cdx6500PPSTXDLCPortEntry | 1.3.6.1.4.1.449.2.1.3.1.1.13.1 | not-accessible | A row of XDLC Port statistics parameters. | |
| INT cdx6500xdlcpStatsPortNumber | 1.3.6.1.4.1.449.2.1.3.1.1.13.1.1 | INTEGER | read-only | Specifies a specific port (physical port number) in the node. |
| INT cdx6500xdlcpPortStatus | 1.3.6.1.4.1.449.2.1.3.1.1.13.1.2 | INTEGER | read-only | Specifies the current port status. disabled : The port is disabled by user. enabled : The port is enabled by user. busyOut : The port is busy outed by user. up : At least one station is responding to polls. down : None of the stations are responding to polls. newvalDisabled : same functionality as 'disabled', new enumeration added for RFC1155 compatibility. |
| INT cdx6500xdlcpPortSpeed | 1.3.6.1.4.1.449.2.1.3.1.1.13.1.3 | INTEGER | read-only | The measured port speed in bits per second. |
| INT cdx6500xdlcpUtilizationIn | 1.3.6.1.4.1.449.2.1.3.1.1.13.1.4 | INTEGER | read-only | Indicates a percentage of the port recources that are currently in use from the line to the port. |
| INT cdx6500xdlcpUtilizationOut | 1.3.6.1.4.1.449.2.1.3.1.1.13.1.5 | INTEGER | read-only | Indicates a percentage of the port recources that are currently in use from the port to the line. |
| CTR cdx6500xdlcpCharInTotal | 1.3.6.1.4.1.449.2.1.3.1.1.13.1.6 | Counter | read-only | Total number of characters processed until now, not including header characters. |
| CTR cdx6500xdlcpCharOutTotal | 1.3.6.1.4.1.449.2.1.3.1.1.13.1.7 | Counter | read-only | Total number of characters processed until now, not including header characters. |
| INT cdx6500xdlcpCharsInPerSec | 1.3.6.1.4.1.449.2.1.3.1.1.13.1.8 | INTEGER | read-only | The average number of characters received per second. |
| INT cdx6500xdlcpCharsOutPerSec | 1.3.6.1.4.1.449.2.1.3.1.1.13.1.9 | INTEGER | read-only | The average number of characters transmitted per second. |
| CTR cdx6500xdlcpFrameInTotal | 1.3.6.1.4.1.449.2.1.3.1.1.13.1.10 | Counter | read-only | Total number of MX25 and SDLC frames processed until now. |
| CTR cdx6500xdlcpFrameOutTotal | 1.3.6.1.4.1.449.2.1.3.1.1.13.1.11 | Counter | read-only | Total number of MX25 and SDLC frames processed until now. |
| INT cdx6500xdlcpFramesInPerSec | 1.3.6.1.4.1.449.2.1.3.1.1.13.1.12 | INTEGER | read-only | The average number of frames received per second. |
| INT cdx6500xdlcpFramesOutPerSec | 1.3.6.1.4.1.449.2.1.3.1.1.13.1.13 | INTEGER | read-only | The average number of frames transmitted per second. |
| NUM cdx6500xdlcpCRCErrors | 1.3.6.1.4.1.449.2.1.3.1.1.13.1.14 | Counter16 | read-only | Total number of CRC errors counted by the I/O driver. |
| NUM cdx6500xdlcpOverrunErrors | 1.3.6.1.4.1.449.2.1.3.1.1.13.1.15 | Counter16 | read-only | Total number of overrun errors counted by the I/O driver. |
| NUM cdx6500xdlcpUnderrunErrors | 1.3.6.1.4.1.449.2.1.3.1.1.13.1.16 | Counter16 | read-only | Total number of overrun errors counted by the I/O driver. |
| CTR cdx6500xdlcpRNRFramesIn | 1.3.6.1.4.1.449.2.1.3.1.1.13.1.17 | Counter | read-only | Indicates the total number of RNR frames received. |
| CTR cdx6500xdlcpRNRFramesOut | 1.3.6.1.4.1.449.2.1.3.1.1.13.1.18 | Counter | read-only | Indicates the total number of RNR frames transmitted. |
| CTR cdx6500xdlcpRRFramesIn | 1.3.6.1.4.1.449.2.1.3.1.1.13.1.19 | Counter | read-only | Indicates the total number of RR frames received. |
| CTR cdx6500xdlcpRRFramesOut | 1.3.6.1.4.1.449.2.1.3.1.1.13.1.20 | Counter | read-only | Indicates the total number of RR frames transmitted. |
| CTR cdx6500xdlcpREJFramesIn | 1.3.6.1.4.1.449.2.1.3.1.1.13.1.21 | Counter | read-only | Indicates the total number of REJ frames received. |
| CTR cdx6500xdlcpREJFramesOut | 1.3.6.1.4.1.449.2.1.3.1.1.13.1.22 | Counter | read-only | Indicates the total number of REJ frames transmitted. |
| INT cdx6500xdlcpMX25StationsUp | 1.3.6.1.4.1.449.2.1.3.1.1.13.1.23 | INTEGER | read-only | Number of MX.25 stations up. |
| INT cdx6500xdlcpMX25StationsDown | 1.3.6.1.4.1.449.2.1.3.1.1.13.1.24 | INTEGER | read-only | Number of MX.25 stations down. |
| INT cdx6500xdlcpMX25StationsDisabled | 1.3.6.1.4.1.449.2.1.3.1.1.13.1.25 | INTEGER | read-only | Number of MX.25 stations disabled. |
| INT cdx6500xdlcpSDLCStationsUp | 1.3.6.1.4.1.449.2.1.3.1.1.13.1.26 | INTEGER | read-only | Number of SDLC stations up. |
| INT cdx6500xdlcpSDLCStationsDown | 1.3.6.1.4.1.449.2.1.3.1.1.13.1.27 | INTEGER | read-only | Number of SDLC stations down. |
| INT cdx6500xdlcpSDLCStationsDisabled | 1.3.6.1.4.1.449.2.1.3.1.1.13.1.28 | INTEGER | read-only | Number of SDLC stations disabled. |
| STR cdx6500xdlcpStateChange | 1.3.6.1.4.1.449.2.1.3.1.1.13.1.29 | DisplayString | read-only | The date and time when the link entered the current state. |
| NUM cdx6500xdlcpLinkDowns | 1.3.6.1.4.1.449.2.1.3.1.1.13.1.30 | Counter16 | read-only | Total number of times link has made a transition from the UP state to the DOWN state. |
| INT cdx6500xdlcpPacketsQueued | 1.3.6.1.4.1.449.2.1.3.1.1.13.1.31 | INTEGER | read-only | Total number of packets queued at the XDLC protocol layer by the transmitter. |
| CTR cdx6500xdlcpSNRMInFrames | 1.3.6.1.4.1.449.2.1.3.1.1.13.1.32 | Counter | read-only | Total number of SNRM frames received until the present time. |
| CTR cdx6500xdlcpSNRMOutFrames | 1.3.6.1.4.1.449.2.1.3.1.1.13.1.33 | Counter | read-only | Total number of SNRM frames transmitted until the present time. |
| CTR cdx6500xdlcpUAInFrames | 1.3.6.1.4.1.449.2.1.3.1.1.13.1.34 | Counter | read-only | Total number of UA frames received until the present time. |
| CTR cdx6500xdlcpUAOutFrames | 1.3.6.1.4.1.449.2.1.3.1.1.13.1.35 | Counter | read-only | Total number of UA frames transmitted until the present time. |
| CTR cdx6500xdlcpDMInFrames | 1.3.6.1.4.1.449.2.1.3.1.1.13.1.36 | Counter | read-only | Total number of DM frames received until the present time. |
| CTR cdx6500xdlcpDMOutFrames | 1.3.6.1.4.1.449.2.1.3.1.1.13.1.37 | Counter | read-only | Total number of DM frames transmitted until the present time. |
| CTR cdx6500xdlcpXIDInFrames | 1.3.6.1.4.1.449.2.1.3.1.1.13.1.38 | Counter | read-only | Total number of XID frames received until the present time. |
| CTR cdx6500xdlcpXIDOutFrames | 1.3.6.1.4.1.449.2.1.3.1.1.13.1.39 | Counter | read-only | Total number of XID frames transmitted until the present time. |
| CTR cdx6500xdlcpDISCInFrames | 1.3.6.1.4.1.449.2.1.3.1.1.13.1.40 | Counter | read-only | Total number of DISC frames received until the present time. |
| CTR cdx6500xdlcpDISCOutFrames | 1.3.6.1.4.1.449.2.1.3.1.1.13.1.41 | Counter | read-only | Total number of DISC frames transmitted until the present time. |
| CTR cdx6500xdlcpRDInFrames | 1.3.6.1.4.1.449.2.1.3.1.1.13.1.42 | Counter | read-only | Total number of RD frames received until the present time. |
| CTR cdx6500xdlcpRDOutFrames | 1.3.6.1.4.1.449.2.1.3.1.1.13.1.43 | Counter | read-only | Total number of RD frames transmitted until the present time. |
| CTR cdx6500xdlcpFRMRInFrames | 1.3.6.1.4.1.449.2.1.3.1.1.13.1.44 | Counter | read-only | Total number of FRMR frames received until the present time. |
| CTR cdx6500xdlcpFRMROutFrames | 1.3.6.1.4.1.449.2.1.3.1.1.13.1.45 | Counter | read-only | Total number of FRMR frames transmitted until the present time. |
| CTR cdx6500xdlcpUPInFrames | 1.3.6.1.4.1.449.2.1.3.1.1.13.1.46 | Counter | read-only | Total number of UP frames received until the present time. |
| CTR cdx6500xdlcpUPOutFrames | 1.3.6.1.4.1.449.2.1.3.1.1.13.1.47 | Counter | read-only | Total number of UP frames transmitted until the present time. |
| CTR cdx6500xdlcpTESTInFrames | 1.3.6.1.4.1.449.2.1.3.1.1.13.1.48 | Counter | read-only | Total number of TEST frames received until the present time. |
| CTR cdx6500xdlcpTESTOutFrames | 1.3.6.1.4.1.449.2.1.3.1.1.13.1.49 | Counter | read-only | Total number of TEST frames transmitted until the present time. |
| CTR cdx6500xdlcpXIDNullInFrames | 1.3.6.1.4.1.449.2.1.3.1.1.13.1.50 | Counter | read-only | Total number of XID Null frames received until the present time. |
| CTR cdx6500xdlcpXIDNullOutFrames | 1.3.6.1.4.1.449.2.1.3.1.1.13.1.51 | Counter | read-only | Total number of XID Null frames transmitted until the present time. |
| CTR cdx6500xdlcpXID0InFrames | 1.3.6.1.4.1.449.2.1.3.1.1.13.1.52 | Counter | read-only | Total number of XID Type 0 frames received until the present time. |
| CTR cdx6500xdlcpXID0OutFrames | 1.3.6.1.4.1.449.2.1.3.1.1.13.1.53 | Counter | read-only | Total number of XID Type 0 frames transmitted until the present time. |
| CTR cdx6500xdlcpXID1InFrames | 1.3.6.1.4.1.449.2.1.3.1.1.13.1.54 | Counter | read-only | Total number of XID Type 1 frames received until the present time. |
| CTR cdx6500xdlcpXID1OutFrames | 1.3.6.1.4.1.449.2.1.3.1.1.13.1.55 | Counter | read-only | Total number of XID Type 1 frames transmitted until the present time. |
| CTR cdx6500xdlcpXID3InFrames | 1.3.6.1.4.1.449.2.1.3.1.1.13.1.56 | Counter | read-only | Total number of XID Type 3 frames received until the present time. |
| CTR cdx6500xdlcpXID3OutFrames | 1.3.6.1.4.1.449.2.1.3.1.1.13.1.57 | Counter | read-only | Total number of XID Type 3 frames transmitted until the present time. |
| cdx6500PSTStationProtocolGroup | 1.3.6.1.4.1.449.2.1.3.1.3 | |||
| cdx6500SPSTXDLCStationTable | 1.3.6.1.4.1.449.2.1.3.1.3.5 | |||
| cdx6500SPSTXDLCSDLCStnTable | 1.3.6.1.4.1.449.2.1.3.1.3.5.1 | not-accessible | All of the statistics parameters relevant to the XDLC SDLC Station table. | |
| cdx6500SPSTXDLCSDLCStnEntry | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1 | not-accessible | A row of XDLC SDLC Station statistics parameters. | |
| INT cdx6500xdlcsdlcStatsPortNum | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.1 | INTEGER | read-only | Refers to the physical port number. |
| INT cdx6500xdlcsdlcStatsStationNum | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.2 | INTEGER | read-only | Station reference number. |
| INT cdx6500xdlcsdlcUtilizationIn | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.3 | INTEGER | read-only | Indicates the percentage of station resources currently in use from the line to the port. |
| INT cdx6500xdlcsdlcUtilizationOut | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.4 | INTEGER | read-only | Indicates the percentage of station resources currently in use from the port to the line. |
| CTR cdx6500xdlcsdlcCharInTotal | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.5 | Counter | read-only | Total number of characters processed until now, not including header characters. |
| CTR cdx6500xdlcsdlcCharOutTotal | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.6 | Counter | read-only | Total number of characters processed until now, not including header characters. |
| INT cdx6500xdlcsdlcCharsInPerSec | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.7 | INTEGER | read-only | The average number of characters received per second. |
| INT cdx6500xdlcsdlcCharsOutPerSec | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.8 | INTEGER | read-only | The average number of characters transmitted per second. |
| INT cdx6500xdlcsdlcPacketsQueued | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.9 | INTEGER | read-only | The total number of packets queued at the SDLC protocol layer. |
| CTR cdx6500xdlcsdlcFrameInTotal | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.10 | Counter | read-only | Total number of MX25 and SDLC frames processed until now. |
| CTR cdx6500xdlcsdlcFrameOutTotal | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.11 | Counter | read-only | Total number of MX25 and SDLC frames processed until now. |
| INT cdx6500xdlcsdlcFramesInPerSec | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.12 | INTEGER | read-only | The average number of frames received per second. |
| INT cdx6500xdlcsdlcFramesOutPerSec | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.13 | INTEGER | read-only | The average number of frames transmitted per second. |
| CTR cdx6500xdlcsdlcRNRFramesIn | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.14 | Counter | read-only | Indicates the total number of RNR frames received. |
| CTR cdx6500xdlcsdlcRNRFramesOut | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.15 | Counter | read-only | Indicates the total number of RNR frames transmitted. |
| CTR cdx6500xdlcsdlcRRFramesIn | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.16 | Counter | read-only | Indicates the total number of RR frames received. |
| CTR cdx6500xdlcsdlcRRFramesOut | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.17 | Counter | read-only | Indicates the total number of RR frames transmitted. |
| CTR cdx6500xdlcsdlcREJFramesIn | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.18 | Counter | read-only | Indicates the total number of REJ frames received. |
| CTR cdx6500xdlcsdlcREJFramesOut | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.19 | Counter | read-only | Indicates the total number of REJ frames transmitted. |
| STR cdx6500xdlcsdlcQLLCState | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.20 | DisplayString | read-only | Indicates the status of the QLLC layer: INOPERATIVE : Noconnection exists with the station. CLOSED : Call connected. OPENING : Setting up session. OPENED : Ready for operation. CLOSING : Disconnect in process. |
| NUM cdx6500xdlcsdlcQRRIn | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.21 | Counter16 | read-only | Total number of QRR packets received until now. |
| NUM cdx6500xdlcsdlcQRROut | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.22 | Counter16 | read-only | Total number of QRR packets transmitted until now. |
| CTR cdx6500xdlcsdlcSNRMInFrames | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.23 | Counter | read-only | Total number of SNRM frames received until the present time. |
| CTR cdx6500xdlcsdlcSNRMOutFrames | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.24 | Counter | read-only | Total number of SNRM frames transmitted until the present time. |
| CTR cdx6500xdlcsdlcUAInFrames | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.25 | Counter | read-only | Total number of UA frames received until the present time. |
| CTR cdx6500xdlcsdlcUAOutFrames | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.26 | Counter | read-only | Total number of UA frames transmitted until the present time. |
| CTR cdx6500xdlcsdlcDMInFrames | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.27 | Counter | read-only | Total number of DM frames received until the present time. |
| CTR cdx6500xdlcsdlcDMOutFrames | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.28 | Counter | read-only | Total number of DM frames transmitted until the present time. |
| CTR cdx6500xdlcsdlcXIDInFrames | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.29 | Counter | read-only | Total number of XID frames received until the present time. |
| CTR cdx6500xdlcsdlcXIDOutFrames | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.30 | Counter | read-only | Total number of XID frames transmitted until the present time. |
| CTR cdx6500xdlcsdlcDISCInFrames | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.31 | Counter | read-only | Total number of DISC frames received until the present time. |
| CTR cdx6500xdlcsdlcDISCOutFrames | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.32 | Counter | read-only | Total number of DISC frames transmitted until the present time. |
| CTR cdx6500xdlcsdlcRDInFrames | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.33 | Counter | read-only | Total number of RD frames received until the present time. |
| CTR cdx6500xdlcsdlcRDOutFrames | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.34 | Counter | read-only | Total number of RD frames transmitted until the present time. |
| CTR cdx6500xdlcsdlcFRMRInFrames | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.35 | Counter | read-only | Total number of FRMR frames received until the present time. |
| CTR cdx6500xdlcsdlcFRMROutFrames | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.36 | Counter | read-only | Total number of FRMR frames transmitted until the present time. |
| CTR cdx6500xdlcsdlcUPInFrames | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.37 | Counter | read-only | Total number of UP frames received until the present time. |
| CTR cdx6500xdlcsdlcUPOutFrames | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.38 | Counter | read-only | Total number of UP frames transmitted until the present time. |
| CTR cdx6500xdlcsdlcTESTInFrames | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.39 | Counter | read-only | Total number of TEST frames received until the present time. |
| CTR cdx6500xdlcsdlcTESTOutFrames | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.40 | Counter | read-only | Total number of TEST frames transmitted until the present time. |
| NUM cdx6500xdlcsdlcQSMInFrames | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.41 | Counter16 | read-only | Total number of QSM packets received until the present time. |
| NUM cdx6500xdlcsdlcQSMOutFrames | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.42 | Counter16 | read-only | Total number of QSM packets transmitted until the present time. |
| NUM cdx6500xdlcsdlcQUAInFrames | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.43 | Counter16 | read-only | Total number of QUA packets received until the present time. |
| NUM cdx6500xdlcsdlcQUAOutFrames | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.44 | Counter16 | read-only | Total number of QUA packets transmitted until the present time. |
| NUM cdx6500xdlcsdlcQRDInFrames | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.45 | Counter16 | read-only | Total number of QRD packets received until the present time. |
| NUM cdx6500xdlcsdlcQRDOutFrames | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.46 | Counter16 | read-only | Total number of QRD packets transmitted until the present time. |
| NUM cdx6500xdlcsdlcQFRMRInFrames | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.47 | Counter16 | read-only | Total number of QFRMR packets received until the present time. |
| NUM cdx6500xdlcsdlcQFRMROutFrames | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.48 | Counter16 | read-only | Total number of QFRMR packets transmitted until the present time. |
| NUM cdx6500xdlcsdlcQXIDInFrames | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.49 | Counter16 | read-only | Total number of QXID packets received until the present time. |
| NUM cdx6500xdlcsdlcQXIDOutFrames | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.50 | Counter16 | read-only | Total number of QXID packets transmitted until the present time. |
| NUM cdx6500xdlcsdlcQDCInFrames | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.51 | Counter16 | read-only | Total number of QDC packets received until the present time. |
| NUM cdx6500xdlcsdlcQDCOutFrames | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.52 | Counter16 | read-only | Total number of QDC packets transmitted until the present time. |
| NUM cdx6500xdlcsdlcQDMInFrames | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.53 | Counter16 | read-only | Total number of QDM packets received until the present time. |
| NUM cdx6500xdlcsdlcQDMOutFrames | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.54 | Counter16 | read-only | Total number of QDM packets transmitted until the present time. |
| NUM cdx6500xdlcsdlcQTESTInFrames | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.55 | Counter16 | read-only | Total number of QTEST packets received until the present time. |
| NUM cdx6500xdlcsdlcQTESTOutFrames | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.56 | Counter16 | read-only | Total number of QTEST packets transmitted until the present time. |
| NUM cdx6500xdlcsdlcQSSInFrames | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.57 | Counter16 | read-only | Total number of QSS packets received until the present time. |
| NUM cdx6500xdlcsdlcQSSOutFrames | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.58 | Counter16 | read-only | Total number of QSS packets transmitted until the present time. |
| NUM cdx6500xdlcsdlcQRSInFrames | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.59 | Counter16 | read-only | Total number of QRS packets received until the present time. |
| NUM cdx6500xdlcsdlcQRSOutFrames | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.60 | Counter16 | read-only | Total number of QRS packets transmitted until the present time. |
| CTR cdx6500xdlcsdlcXIDNullInFrames | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.61 | Counter | read-only | Total number of XID Null frames received until the present time. |
| CTR cdx6500xdlcsdlcXIDNullOutFrames | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.62 | Counter | read-only | Total number of XID Null frames transmitted until the present time. |
| CTR cdx6500xdlcsdlcXID0InFrames | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.63 | Counter | read-only | Total number of XID Type 0 frames received until the present time. |
| CTR cdx6500xdlcsdlcXID0OutFrames | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.64 | Counter | read-only | Total number of XID Type 0 frames transmitted until the present time. |
| CTR cdx6500xdlcsdlcXID1InFrames | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.65 | Counter | read-only | Total number of XID Type 1 frames received until the present time. |
| CTR cdx6500xdlcsdlcXID1OutFrames | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.66 | Counter | read-only | Total number of XID Type 1 frames transmitted until the present time. |
| CTR cdx6500xdlcsdlcXID3InFrames | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.67 | Counter | read-only | Total number of XID Type 3 frames received until the present time. |
| CTR cdx6500xdlcsdlcXID3OutFrames | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.68 | Counter | read-only | Total number of XID Type 3 frames transmitted until the present time. |
| INT cdx6500xdlcsdlcVSNumber | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.69 | INTEGER | read-only | Next VS seuqunce number this station expects. |
| INT cdx6500xdlcsdlcVRNumber | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.70 | INTEGER | read-only | Next VR seuqunce number this station expects. |
| INT cdx6500xdlcsdlcNRNumber | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.71 | INTEGER | read-only | Next NR seuqunce number this station expects. |
| INT cdx6500xdlcsdlcNSNumber | 1.3.6.1.4.1.449.2.1.3.1.3.5.1.1.72 | INTEGER | read-only | Next NS seuqunce number this station expects. |
| cdx6500SPSTXDLCMX25StnTable | 1.3.6.1.4.1.449.2.1.3.1.3.5.2 | not-accessible | All of the statistics parameters relevant to the XDLC MX.25 Station table. | |
| cdx6500SPSTXDLCMX25StnEntry | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1 | not-accessible | A row of XDLC MX.25 Station statistics parameters. | |
| INT cdx6500xdlcmx25StatsPortNum | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.1 | INTEGER | read-only | Refers to the physical port number. |
| INT cdx6500xdlcmx25StatsStationNum | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.2 | INTEGER | read-only | Station reference number. |
| INT cdx6500xdlcmx25UtilizationIn | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.3 | INTEGER | read-only | Indicates the percentage of station resources currently in use from the line to the port. |
| INT cdx6500xdlcmx25UtilizationOut | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.4 | INTEGER | read-only | Indicates the percentage of station resources currently in use from the port to the line. |
| CTR cdx6500xdlcmx25CharInTotal | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.5 | Counter | read-only | Total number of characters processed until now, not including frame and packet headers. |
| CTR cdx6500xdlcmx25CharOutTotal | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.6 | Counter | read-only | Total number of characters processed until now, not including frame and packet headers. |
| INT cdx6500xdlcmx25CharsInPerSec | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.7 | INTEGER | read-only | The average number of characters received per second during the previous minute. |
| INT cdx6500xdlcmx25CharsOutPerSec | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.8 | INTEGER | read-only | The average number of characters transmitted per second during the previous minute. |
| CTR cdx6500xdlcmx25PktInTotal | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.9 | Counter | read-only | Total number of data packets passed through the station. |
| CTR cdx6500xdlcmx25PktOutTotal | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.10 | Counter | read-only | Total number of data packets passed through the station. |
| INT cdx6500xdlcmx25PktsInPerSec | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.11 | INTEGER | read-only | The average number of packets received per second during the previous minute. |
| INT cdx6500xdlcmx25PktsOutPerSec | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.12 | INTEGER | read-only | The average number of packets transmitted per second during the previous minute. |
| INT cdx6500xdlcmx25PacketsQueued | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.13 | INTEGER | read-only | Total number of packets queued at the MX25 protocol layer. |
| CTR cdx6500xdlcmx25FrameInTotal | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.14 | Counter | read-only | Total number of frames processed until now. |
| CTR cdx6500xdlcmx25FrameOutTotal | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.15 | Counter | read-only | Total number of frames processed until now. |
| INT cdx6500xdlcmx25FramesInPerSec | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.16 | INTEGER | read-only | The average number of frames received per second during the previous minute. |
| INT cdx6500xdlcmx25FramesOutPerSec | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.17 | INTEGER | read-only | The average number of frames transmitted per second during the previous minute. |
| CTR cdx6500xdlcmx25RNRFramesIn | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.18 | Counter | read-only | Indicates the total number of RNR frames received. |
| CTR cdx6500xdlcmx25RNRFramesOut | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.19 | Counter | read-only | Indicates the total number of RNR frames transmitted. |
| CTR cdx6500xdlcmx25RRFramesIn | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.20 | Counter | read-only | Indicates the total number of RR frames received. |
| CTR cdx6500xdlcmx25RRFramesOut | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.21 | Counter | read-only | Indicates the total number of RR frames transmitted. |
| CTR cdx6500xdlcmx25REJFramesIn | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.22 | Counter | read-only | Indicates the total number of REJ frames received. |
| CTR cdx6500xdlcmx25REJFramesOut | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.23 | Counter | read-only | Indicates the total number of REJ frames transmitted. |
| CTR cdx6500xdlcmx25DataPktsIn | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.24 | Counter | read-only | Indicates the total number of packets received. |
| CTR cdx6500xdlcmx25DataPktsOut | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.25 | Counter | read-only | Indicates the total number of packets transmitted. |
| INT cdx6500xdlcmx25MaxSVC | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.26 | INTEGER | read-only | The maximum number SVC channels used by this station. |
| INT cdx6500xdlcmx25CurrentSVC | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.27 | INTEGER | read-only | The number of SVC channels currently in use. |
| INT cdx6500xdlcmx25MaxPVC | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.28 | INTEGER | read-only | The maximum number PVC channels used by this station. |
| INT cdx6500xdlcmx25CurrentPVC | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.29 | INTEGER | read-only | The number of PVC channels currently in use. |
| CTR cdx6500xdlcmx25InfoInFrames | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.30 | Counter | read-only | Indicates the total number of Info frames received. |
| CTR cdx6500xdlcmx25InfoOutFrames | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.31 | Counter | read-only | Indicates the total number of Info frames transmitted. |
| CTR cdx6500xdlcmx25SNRMInFrames | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.32 | Counter | read-only | Indicates the total number of SNRM frames received. |
| CTR cdx6500xdlcmx25SNRMOutFrames | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.33 | Counter | read-only | Indicates the total number of SNRM frames transmitted. |
| CTR cdx6500xdlcmx25UAInFrames | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.34 | Counter | read-only | Indicates the total number of UA frames received. |
| CTR cdx6500xdlcmx25UAOutFrames | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.35 | Counter | read-only | Indicates the total number of UA frames transmitted. |
| CTR cdx6500xdlcmx25FRMRInFrames | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.36 | Counter | read-only | Indicates the total number of FRMR frames received. |
| CTR cdx6500xdlcmx25FRMROutFrames | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.37 | Counter | read-only | Indicates the total number of FRMR frames transmitted. |
| CTR cdx6500xdlcmx25RRInPkts | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.38 | Counter | read-only | Indicates the total number of RR packets received. |
| CTR cdx6500xdlcmx25RROutPkts | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.39 | Counter | read-only | Indicates the total number of RR packets transmitted. |
| CTR cdx6500xdlcmx25RNRInPkts | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.40 | Counter | read-only | Indicates the total number of RNR packets received. |
| CTR cdx6500xdlcmx25RNROutPkts | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.41 | Counter | read-only | Indicates the total number of RNR packets transmitted. |
| CTR cdx6500xdlcmx25REJInPkts | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.42 | Counter | read-only | Indicates the total number of REJ packets received. |
| CTR cdx6500xdlcmx25REJOutPkts | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.43 | Counter | read-only | Indicates the total number of REJ packets transmitted. |
| CTR cdx6500xdlcmx25InCallReqs | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.44 | Counter | read-only | Indicates the total number of Call Request packets received. |
| CTR cdx6500xdlcmx25OutCallReqs | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.45 | Counter | read-only | Indicates the total number of Call Request packets transmitted. |
| CTR cdx6500xdlcmx25InCallAccepts | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.46 | Counter | read-only | Indicates the total number of Call Accept packets received. |
| CTR cdx6500xdlcmx25OutCallAccepts | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.47 | Counter | read-only | Indicates the total number of Call Accept packets transmitted. |
| CTR cdx6500xdlcmx25InClearReqs | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.48 | Counter | read-only | Indicates the total number of Clear Request packets received. |
| CTR cdx6500xdlcmx25OutClearReqs | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.49 | Counter | read-only | Indicates the total number of Clear Request packets transmitted. |
| CTR cdx6500xdlcmx25InClearConfs | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.50 | Counter | read-only | Indicates the total number of Clear confirmation packets received. |
| CTR cdx6500xdlcmx25OutClearConfs | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.51 | Counter | read-only | Indicates the total number of Clear confirmation packets transmitted. |
| CTR cdx6500xdlcmx25InInterruptReqs | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.52 | Counter | read-only | Indicates the total number of Interrupt Request packets received. |
| CTR cdx6500xdlcmx25OutInterruptReqs | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.53 | Counter | read-only | Indicates the total number of Interrupt Request packets transmitted. |
| CTR cdx6500xdlcmx25InInterruptConfs | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.54 | Counter | read-only | Indicates the total number of Interrupt Confimation packets received. |
| CTR cdx6500xdlcmx25OutInterruptConfs | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.55 | Counter | read-only | Indicates the total number of Interrupt Confirmation packets transmitted. |
| CTR cdx6500xdlcmx25InResetReqs | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.56 | Counter | read-only | Indicates the total number of Reset Request packets received. |
| CTR cdx6500xdlcmx25OutResetReqs | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.57 | Counter | read-only | Indicates the total number of Reset Request packets transmitted. |
| CTR cdx6500xdlcmx25InResetConfs | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.58 | Counter | read-only | Indicates the total number of Reset Confimation packets received. |
| CTR cdx6500xdlcmx25OutResetConfs | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.59 | Counter | read-only | Indicates the total number of Reset Confirmation packets transmitted. |
| CTR cdx6500xdlcmx25InRestartReqs | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.60 | Counter | read-only | Indicates the total number of Restart Request packets received. |
| CTR cdx6500xdlcmx25OutRestartReqs | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.61 | Counter | read-only | Indicates the total number of Restart Request packets transmitted. |
| CTR cdx6500xdlcmx25InRestartConfs | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.62 | Counter | read-only | Indicates the total number of Restart Confimation packets received. |
| CTR cdx6500xdlcmx25OutRestartConfs | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.63 | Counter | read-only | Indicates the total number of Restart Confirmation packets transmitted. |
| INT cdx6500xdlcmx25LastInLCN | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.64 | INTEGER | read-only | Channel number of last inbound call. |
| STR cdx6500xdlcmx25InStatus | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.65 | DisplayString | read-only | Success : Message has been through the network successfully. Process OK, call passed to ROUTE : Inbound call has been processed and passed to Route and is being processed. Failed processing, call cleared : Inbound message was processed, but failed for some reason, and the call has been cleared. |
| STR cdx6500xdlcmx25LICBPCalledAddr | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.66 | DisplayString | read-only | Last inbound call before processing: the X.25 address that was called. |
| STR cdx6500xdlcmx25LICBPCallingAddr | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.67 | DisplayString | read-only | Last inbound call before processing: the X.25 address that initiated the call. |
| STR cdx6500xdlcmx25LICBPFacilities | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.68 | DisplayString | read-only | Last inbound call before processing: the facilities that were requested in the most recent call request packet. |
| STR cdx6500xdlcmx25LICBPCUD | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.69 | DisplayString | read-only | Last inbound call before processing: Call User Data contains end-user or routing information specific to the network. |
| STR cdx6500xdlcmx25LICAPCalledAddr | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.70 | DisplayString | read-only | Last inbound call after processing: the X.25 address that was called. |
| STR cdx6500xdlcmx25LICAPCallingAddr | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.71 | DisplayString | read-only | Last inbound call after processing: the X.25 address that initiated the call. |
| STR cdx6500xdlcmx25LICAPFacilities | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.72 | DisplayString | read-only | Last inbound call after processing: the facilities that were requested in the most recent call request packet. |
| STR cdx6500xdlcmx25LICAPCUD | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.73 | DisplayString | read-only | Last inbound call after processing: Call User Data contains end-user or routing information specific to the network. |
| INT cdx6500xdlcmx25LastOutLCN | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.74 | INTEGER | read-only | Channel number of last outbound call. |
| STR cdx6500xdlcmx25OutStatus | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.75 | DisplayString | read-only | Success : Message has been through the network successfully. Process OK, call passed to ROUTE : Inbound call has been processed and passed to Route and is being processed. Failed processing, call cleared : Inbound message was processed, but failed for some reason, and the call has been cleared. |
| STR cdx6500xdlcmx25LOCBPCalledAddr | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.76 | DisplayString | read-only | Last outbound call before processing: the X.25 address that was called. |
| STR cdx6500xdlcmx25LOCBPCallingAddr | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.77 | DisplayString | read-only | Last outbound call before processing: the X.25 address that initiated the call. |
| STR cdx6500xdlcmx25LOCBPFacilities | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.78 | DisplayString | read-only | Last outbound call before processing: the facilities that were requested in the most recent call request packet. |
| STR cdx6500xdlcmx25LOCBPCUD | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.79 | DisplayString | read-only | Last outbound call before processing: Call User Data contains end-user or routing information specific to the network. |
| STR cdx6500xdlcmx25LOCAPCalledAddr | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.80 | DisplayString | read-only | Last outbound call after processing: the X.25 address that was called. |
| STR cdx6500xdlcmx25LOCAPCallingAddr | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.81 | DisplayString | read-only | Last outbound call after processing: the X.25 address that initiated the call. |
| STR cdx6500xdlcmx25LOCAPFacilities | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.82 | DisplayString | read-only | Last outbound call after processing: the facilities that were requested in the most recent call request packet. |
| STR cdx6500xdlcmx25LOCAPCUD | 1.3.6.1.4.1.449.2.1.3.1.3.5.2.1.83 | DisplayString | read-only | Last outbound call after processing: Call User Data contains end-user or routing information specific to the network. |
| cdx6500Controls | 1.3.6.1.4.1.449.2.1.4 | |||
| cdx6500ContXDLC | 1.3.6.1.4.1.449.2.1.4.7 | |||
| cdx6500ContXDLCStationTable | 1.3.6.1.4.1.449.2.1.4.7.1 | not-accessible | All of the control parameters relevant to the XDLC Station table. | |
| cdx6500ContXDLCStationEntry | 1.3.6.1.4.1.449.2.1.4.7.1.1 | not-accessible | A row of XDLC Station Control parameters. | |
| INT cdx6500xdlcsContPortNum | 1.3.6.1.4.1.449.2.1.4.7.1.1.1 | INTEGER | not-accessible | XDLC Port Number. |
| INT cdx6500xdlcsContStationNum | 1.3.6.1.4.1.449.2.1.4.7.1.1.2 | INTEGER | not-accessible | XDLC Station Number |
| INT cdx6500xdlcsContBootStation | 1.3.6.1.4.1.449.2.1.4.7.1.1.3 | INTEGER | write-only | Boots the specified XDLC station. boot - Boot Station. noBoot- Do not boot Station. |
| INT cdx6500xdlcsContDisableStation | 1.3.6.1.4.1.449.2.1.4.7.1.1.4 | INTEGER | write-only | Disables the specified XDLC station. disable - Disable Station. noDisable - Do not disable Station. |
| INT cdx6500xdlcsContEnableStation | 1.3.6.1.4.1.449.2.1.4.7.1.1.5 | INTEGER | write-only | Enables the specified XDLC station. enable - Enable Station noEnable - Not not enable Station |
| INT cdx6500xdlcsContResetStnStats | 1.3.6.1.4.1.449.2.1.4.7.1.1.6 | INTEGER | write-only | Resets statistics for the specified XDLC station reset - Reset Station Statistics noReset - Do not reset Station Statistics |
RFC description
XDLC protocol port configuration and statistics for Codex CDX6500 networking equipment.
Start monitoring cdx6500-series SDLC/XDLC data-link-control equipment, legacy SNA gateway/FEP hardware (station-protocol conformance-group declaration) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.