| OID symbolic | OID numeric | Type | Access | Description |
|---|
| usr | 1.3.6.1.4.1.429 | | | |
| nas | 1.3.6.1.4.1.429.1 | | | |
| x25g | 1.3.6.1.4.1.429.1.11 | | | |
| x25gwId | 1.3.6.1.4.1.429.1.11.1 | | | |
| x25gwIdTable | 1.3.6.1.4.1.429.1.11.1.1 | | not-accessible | A table that contains information that identifies the
hardware and software that make up the specified X.25 card. |
| x25gwIdEntry | 1.3.6.1.4.1.429.1.11.1.1.1 | | not-accessible | There is one entry in this table for every X.25 card in the
chassis. |
| INT x25gwIdIndex | 1.3.6.1.4.1.429.1.11.1.1.1.1 | INTEGER | read-only | An index that uniquely identifies the X.25 card for which
this row in the table pertains. The value of this index
matches the value of the index for the corresponding entity
in the entity table of the chassis MIB. |
| STR x25gwIdHardwareSerNum | 1.3.6.1.4.1.429.1.11.1.1.1.2 | DisplayString | read-only | The X.25 card's hardware serial number as stored in
EEPROM. |
| STR x25gwIdHardwareRev | 1.3.6.1.4.1.429.1.11.1.1.1.3 | DisplayString | read-only | The hardware revision of the specified X.25 card as stored
in its EEPROM. |
| STR x25gwIdSoftwareRev | 1.3.6.1.4.1.429.1.11.1.1.1.4 | DisplayString | read-only | The revision of the software being executed in the
specified X.25 card. |
| INT x25gwIdCpuType | 1.3.6.1.4.1.429.1.11.1.1.1.5 | INTEGER | read-only | Defines the type of CPU present on the X.25 Gateway NAC. |
| INT x25gwIdRamInstalled | 1.3.6.1.4.1.429.1.11.1.1.1.6 | INTEGER | read-only | Specifies the amount of DRAM installed on the X.25 Gateway
NAC in Kbytes. |
| INT x25gwIdFlashInstalled | 1.3.6.1.4.1.429.1.11.1.1.1.7 | INTEGER | read-only | Specifies the amount of Flash Rom installed on the X.25
Gateway NAC in Kbytes. |
| INT x25gwIdOperCfgSts | 1.3.6.1.4.1.429.1.11.1.1.1.8 | INTEGER | read-only | Informs the operator as to whether the operational
parameters are the NVRAM parameters or if the
administrative parameters have been saved to NVRAM. |
| INT x25gwIdSelfTestResult | 1.3.6.1.4.1.429.1.11.1.1.1.9 | INTEGER | read-only | Displays the results of the most resent self test performed
by the X.25 Gateway NAC. If all tests have passed a value
of 0 is returned. |
| INT x25gwIdMgmtConnect | 1.3.6.1.4.1.429.1.11.1.1.1.10 | INTEGER | read-only | Indicates the current status of X.25 gateway user
interface. |
| x25gwCmd | 1.3.6.1.4.1.429.1.11.2 | | | |
| x25gwCmdTable | 1.3.6.1.4.1.429.1.11.2.1 | | not-accessible | The X.25 Card Command table contains an entry for each of
the manageable X.25 Cards in the chassis. It provides a
means through which to take specific actions on one or more
X.25 cards in the NAS chassis. The number of entries in
this table is given by the value of x25gwIdNumber. |
| x25gwCmdEntry | 1.3.6.1.4.1.429.1.11.2.1.1 | | not-accessible | There is one X.25 Card Command entry per X.25 Card in the
chassis. |
| INT x25gwCmdIndex | 1.3.6.1.4.1.429.1.11.2.1.1.1 | INTEGER | read-only | A unique value for each X.25 Card in the chassis. The
value of this object matches the value of the index of the
corresponding X.25 Card's entry in the entity table of the
chassis MIB. |
| OCT x25gwCmdMgtStationId | 1.3.6.1.4.1.429.1.11.2.1.1.2 | OCTET STRING | read-write | This object is a generic read-write variable that a
Management Station (MS) can use to guarantee that the
results from a given command are the results of a command
issued by that specific MS. Each MS must SET a unique
value to this object when doing commands and GET the value
of this object together with x25gwCmdReqId and
x25gwCmdResult to detect interference from other MSs. |
| INT x25gwCmdReqId | 1.3.6.1.4.1.429.1.11.2.1.1.3 | INTEGER | read-only | This object contains the value of the request-id field in
the SNMP PDU which invoked the current or most recent
command or test on this X.25 Card. If the request-id is
unknown or undefined, this object contains the value zero. |
| INT x25gwCmdFunction | 1.3.6.1.4.1.429.1.11.2.1.1.4 | INTEGER | read-write | This object contains a value which describes the command
which is being invoked. |
| INT x25gwCmdForce | 1.3.6.1.4.1.429.1.11.2.1.1.5 | INTEGER | read-write | In some cases, the X.25 Card may be in a state such that
certain commands could adversely affect connections. In
such cases, a command request with this object not present
or set to noForce will result in a warning. If the
operator elects to ignore such warnings, this object can be
set to force in a subsequent issue of the command to cause
the command to be carried out regardless of its potentially
hazzardous effects. |
| OCT x25gwCmdParam | 1.3.6.1.4.1.429.1.11.2.1.1.6 | OCTET STRING | read-write | This object contains parameters that are specific to the
particular command being issued. In some cases, there will
be no aditional parameters required. |
| INT x25gwCmdResult | 1.3.6.1.4.1.429.1.11.2.1.1.7 | INTEGER | read-only | This object contains the result of the most recently
requested command or test, or the value none(1) if no
commands have been requested since the last reset. |
| INT x25gwCmdCode | 1.3.6.1.4.1.429.1.11.2.1.1.8 | INTEGER | read-only | The Value of this object is value of this object is
noError(1) if the command was successful, and indicates a
further description of what went wrong if it was
unsuccessful. |
| x25gwCfg | 1.3.6.1.4.1.429.1.11.3 | | | |
| x25gwCfgTable | 1.3.6.1.4.1.429.1.11.3.1 | | not-accessible | A table of configurable parameters specific to the X.25
Gateway NAC. |
| x25gwCfgEntry | 1.3.6.1.4.1.429.1.11.3.1.1 | | not-accessible | |
| INT x25gwCfgIndex | 1.3.6.1.4.1.429.1.11.3.1.1.1 | INTEGER | read-only | A unique value for each X.25 NAC installed in the chassis.
The value of this index is identical to the index in the
USR chassis MIB associates with the X.25 Gateway Card
entity. |
| INT x25gwCfgUiPort | 1.3.6.1.4.1.429.1.11.3.1.1.2 | INTEGER | read-only | Defines how the user interface port on the X.25 NIC will be
used. When configured for PAD access the UI port will
provide a means of accessing the X.25 network via a direct
connected serial device. |
| INT x25gwCfgLocModemConn | 1.3.6.1.4.1.429.1.11.3.1.1.3 | INTEGER | read-write | Defines whether the gateway UI access will be via direct
attachment or by Dial up Modem. |
| INT x25gwCfgRoutingType | 1.3.6.1.4.1.429.1.11.3.1.1.4 | INTEGER | read-write | Determines the means by which X.25 call will be routed to
the NMC or modem. Default=None(1). |
| STR x25gwCfgCudRoutStr | 1.3.6.1.4.1.429.1.11.3.1.1.5 | DisplayString | read-write | Call user data string is used to compare to the incoming
X.25 call request CUD. If they match then the call is
routed to the NMC.
Default=MGMTOVX25. |
| INT x25gwCfgX121SubAddr | 1.3.6.1.4.1.429.1.11.3.1.1.6 | INTEGER | read-write | X.121 Subaddress is used to compare to the incoming X.25
call request Subaddress. If they match then the call is
routed to the NMC. Default=99. |
| STR x25gwCfgSysDate | 1.3.6.1.4.1.429.1.11.3.1.1.7 | DisplayString | read-write | X.25 gateway system date. Default = 01-01-95. |
| STR x25gwCfgSysTime | 1.3.6.1.4.1.429.1.11.3.1.1.8 | DisplayString | read-write | X.25 gateway system time. Default = 00:00:00. |
| x25gwTrapEna | 1.3.6.1.4.1.429.1.11.4 | | | |
| x25gwTrapEnaTable | 1.3.6.1.4.1.429.1.11.4.1 | | not-accessible | Table containing objects to enable traps on the X.25 Cards
in the chassis. |
| x25gwTrapEnaEntry | 1.3.6.1.4.1.429.1.11.4.1.1 | | not-accessible | There is one entry for each X.25 Card in the chassis. |
| INT x25gwTrapEnaIndex | 1.3.6.1.4.1.429.1.11.4.1.1.1 | INTEGER | read-only | A unique index identifying the X.25 Card to which the trap
enable objects pertain. |
| INT x25gwTrapEnaUiReset | 1.3.6.1.4.1.429.1.11.4.1.1.2 | INTEGER | read-write | Enables reporting of NAC Reset by user interface command
traps. Default=disable(2). |
