WHISP-SM-MIB :: naptPublicIP

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › WHISP-SM-MIB › naptPublicIP

naptPublicIP

Module: WHISP-SM-MIB

OID (symbolic): WHISP-SM-MIB::naptPublicIP

OID (numeric): 1.3.6.1.4.1.161.19.3.2.1.13

Node type: OBJECT-TYPE

Type: IpAddress

Access: read-write

Description: IP Address of NAPT Public Interface. The variable is available only when NAPT is enabled.

What is naptPublicIP?

IP address of the NAPT public interface (the Ethernet-facing side toward the upstream network). It is available only when NAPT is enabled.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.161.19.3.2.1.13
snmpwalk -v2c -c public <target> WHISP-SM-MIB::naptPublicIP

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.161.19.3.2.1.13.1
snmpget -v2c -c public <target> WHISP-SM-MIB::naptPublicIP.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.161.19.3.2.1.13.1 a <value>

Start monitoring Cambium/Motorola Canopy Subscriber Module (SM), fixed wireless broadband CPE radio (signal-level/session/DFS-event status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WHISP-SM-MIB::naptPublicIP OID value, configure state conditions and alerts, and monitor any Cambium/Motorola Canopy Subscriber Module (SM), fixed wireless broadband CPE radio (signal-level/session/DFS-event status) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.161motWHISP-GLOBAL-REG-MIB
1.3.6.1.4.1.161.19whispRootWHISP-GLOBAL-REG-MIB
1.3.6.1.4.1.161.19.3whispProductsWHISP-GLOBAL-REG-MIB
1.3.6.1.4.1.161.19.3.2whispSmWHISP-GLOBAL-REG-MIB
Numeric OIDNameModule
1.3.6.1.4.1.161.19.3.2.1whispSmConfigWHISP-SM-MIB
1.3.6.1.4.1.161.19.3.2.1.13naptPublicIPWHISP-SM-MIB