WHISP-SM-MIB :: authKeySm

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › WHISP-SM-MIB › authKeySm

authKeySm

Module: WHISP-SM-MIB

OID (symbolic): WHISP-SM-MIB::authKeySm

OID (numeric): 1.3.6.1.4.1.161.19.3.2.1.7

Node type: OBJECT-TYPE

Type: DisplayString

Access: read-write

Description: Authentication key. It should be equal or less than 32 characters long.

What is authKeySm?

Authentication key for the SM, 32 characters or fewer. It must match the key configured on the access point (or on the AP side of your security settings) or the SM will fail authentication.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.161.19.3.2.1.7
snmpwalk -v2c -c public <target> WHISP-SM-MIB::authKeySm

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.161.19.3.2.1.7.1
snmpget -v2c -c public <target> WHISP-SM-MIB::authKeySm.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.161.19.3.2.1.7.1 s <value>

Start monitoring Cambium/Motorola Canopy Subscriber Module (SM), fixed wireless broadband CPE radio (signal-level/session/DFS-event status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WHISP-SM-MIB::authKeySm OID value, configure state conditions and alerts, and monitor any Cambium/Motorola Canopy Subscriber Module (SM), fixed wireless broadband CPE radio (signal-level/session/DFS-event status) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.161motWHISP-GLOBAL-REG-MIB
1.3.6.1.4.1.161.19whispRootWHISP-GLOBAL-REG-MIB
1.3.6.1.4.1.161.19.3whispProductsWHISP-GLOBAL-REG-MIB
1.3.6.1.4.1.161.19.3.2whispSmWHISP-GLOBAL-REG-MIB
Numeric OIDNameModule
1.3.6.1.4.1.161.19.3.2.1whispSmConfigWHISP-SM-MIB
1.3.6.1.4.1.161.19.3.2.1.7authKeySmWHISP-SM-MIB