All MIBs › VPLS-DRAFT-00-MIB › vplsIndexNext
vplsIndexNext
Module: VPLS-DRAFT-00-MIB
OID (symbolic): VPLS-DRAFT-00-MIB::vplsIndexNext
OID (numeric): 1.3.6.1.2.1.10.0.1.1
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: This object contains an appropriate value to be used for vplsIndex when creating entries in the vplsConfigTable. The value 0 indicates that no unassigned entries are available. To obtain the value of vplsIndex for a new entry in the vplsTable, the manager issues a management protocol retrieval operation to obtain the current value of vplsIndex. After each retrieval operation, the agent should modify the value to reflect the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse.
What is vplsIndexNext?
This object suggests the next available index value a manager should use when creating a new entry in the VPLS configuration table, with 0 meaning no unassigned index is currently available. Admins retrieve this value before provisioning a new VPLS instance, and the agent automatically advances it after each read so the next request gets a fresh index. For example, a manager polling vplsIndexNext and getting back 5 would use that value as the vplsIndex for the next VPLS service it creates.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.0.1.1 snmpwalk -v2c -c public <target> VPLS-DRAFT-00-MIB::vplsIndexNext
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.0.1.1.1 snmpget -v2c -c public <target> VPLS-DRAFT-00-MIB::vplsIndexNext.1
Start monitoring Provider Edge (PE) router, vendor-neutral, standards-based MIB (LDP-signaled VPLS instance/pseudowire status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the VPLS-DRAFT-00-MIB::vplsIndexNext OID value, configure state conditions and alerts, and monitor any Provider Edge (PE) router, vendor-neutral, standards-based MIB (LDP-signaled VPLS instance/pseudowire status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.10.0 | dvbNiuIf | DVB-CABLE-NIU-IF-MIB |
| 1.3.6.1.2.1.10.0.1 | dvbNiuMacObjects | DVB-CABLE-NIU-IF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.0.1.1 | vplsIndexNext | VPLS-DRAFT-00-MIB |