VIPTELA-WWAN

All MIBs › VIPTELA-WWAN

Organization: Viptela, Inc.

Last Updated: 2020-07-01

Category: Viptela SD-WAN

Description: Manages Viptela SD-WAN edge WWAN cellular interface signal strength, carrier, and data sessions.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is VIPTELA-WWAN?

VIPTELA-WWAN is a Viptela, Inc. (Cisco SD-WAN heritage) proprietary MIB reporting cellular (WWAN) radio and session status on Viptela SD-WAN edge devices with an embedded cellular modem. Its radio table, keyed by interface name, records band, bandwidth, TX/RX channel, RSSI, RSRP (with comment), RSRQ (with comment), SNR (with comment), Ec/Io, SINR, IO level, radio mode, band class, and channel, while a sessions table records interface name, session ID, and data bearer type. As a performance/status MIB it lets an administrator watch cellular signal quality (RSSI, RSRP, SNR) and active data-session state on a Viptela SD-WAN device's cellular WAN interface. It is deployed on Viptela (Cisco SD-WAN) edge devices with cellular WWAN interfaces. Engineers can download the VIPTELA-WWAN file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in VIPTELA-WWAN. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Viptela (Cisco SD-WAN) edge devices (cellular WWAN)

Monitoring Examples

An administrator monitors cellularRadioRsrp and cellularRadioSnr to catch a degrading cellular backhaul link on a Viptela (Cisco SD-WAN) edge device.

What Can Be Monitored

cellular radio signal quality and session status

Imported Objects

From SNMPv2-SMI

Counter32
Counter64
Gauge32
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DateAndTime
RowStatus
TEXTUAL-CONVENTION
TruthValue

From VIPTELA-GLOBAL

viptela

OBJECT-IDENTITY

How to Use in IPNetwork Monitor

Example using cellularSessionsRxPackets OID:

Select a Viptela (Cisco SD-WAN) edge device with cellular WWAN (RSSI/RSRP/SNR signal-quality and session status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type cellularSessionsRxPackets into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the receive packets. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
viptela_wwan	1.3.6.1.4.1.41916.16			This module defines the data model for cellular management
cellular	1.3.6.1.4.1.41916.16.1
cellularRadioTable	1.3.6.1.4.1.41916.16.1.1		not-accessible	Display cellular radio information
cellularRadioEntry	1.3.6.1.4.1.41916.16.1.1.1		not-accessible
STR cellularRadioIfName	1.3.6.1.4.1.41916.16.1.1.1.1	String	not-accessible	Interface name
UNS cellularRadioBand	1.3.6.1.4.1.41916.16.1.1.1.2	UnsignedByte	read-only	Frequency band
STR cellularRadioBandwidth	1.3.6.1.4.1.41916.16.1.1.1.3	ConfdString	read-only	Bandwidth
UNS cellularRadioTxChannel	1.3.6.1.4.1.41916.16.1.1.1.4	UnsignedShort	read-only	Transmit channel
UNS cellularRadioRxChannel	1.3.6.1.4.1.41916.16.1.1.1.5	UnsignedShort	read-only	Receive channel
BYT cellularRadioRssi	1.3.6.1.4.1.41916.16.1.1.1.6	Byte	read-only	Received signal strength indicator
SHO cellularRadioRsrp	1.3.6.1.4.1.41916.16.1.1.1.7	Short	read-only	Reference signal receive power
STR cellularRadioRsrpComment	1.3.6.1.4.1.41916.16.1.1.1.8	String	read-only	RSRP value classification
BYT cellularRadioRsrq	1.3.6.1.4.1.41916.16.1.1.1.9	Byte	read-only	Reference signal receive quality
STR cellularRadioRsrqComment	1.3.6.1.4.1.41916.16.1.1.1.10	String	read-only	RSRQ value classification
STR cellularRadioSnr	1.3.6.1.4.1.41916.16.1.1.1.11	ConfdString	read-only	Signal-to-noise ratio
STR cellularRadioSnrComment	1.3.6.1.4.1.41916.16.1.1.1.12	String	read-only	SNR value classification
STR cellularRadioEcio	1.3.6.1.4.1.41916.16.1.1.1.13	ConfdString	read-only	EC/IO
STR cellularRadioSinr	1.3.6.1.4.1.41916.16.1.1.1.14	ConfdString	read-only	SINR
I32 cellularRadioIo	1.3.6.1.4.1.41916.16.1.1.1.15	Integer32	read-only	Received IO
WWA cellularRadioMode	1.3.6.1.4.1.41916.16.1.1.1.16	WwanRadioEnum	read-only	Radio Mode
STR cellularRadioBandClass	1.3.6.1.4.1.41916.16.1.1.1.17	String	read-only	Band class
UNS cellularRadioChannel	1.3.6.1.4.1.41916.16.1.1.1.18	UnsignedShort	read-only	Active channel
cellularSessionsTable	1.3.6.1.4.1.41916.16.1.2		not-accessible	Display cellular data session information
cellularSessionsEntry	1.3.6.1.4.1.41916.16.1.2.1		not-accessible
STR cellularSessionsIfName	1.3.6.1.4.1.41916.16.1.2.1.1	String	not-accessible	Interface name
UNS cellularSessionsSessionId	1.3.6.1.4.1.41916.16.1.2.1.2	UnsignedByte	not-accessible	Session ID
STR cellularSessionsDataBearer	1.3.6.1.4.1.41916.16.1.2.1.3	String	read-only	Data bearer technology
STR cellularSessionsDormancyState	1.3.6.1.4.1.41916.16.1.2.1.4	String	read-only	Dormancy state
UNS cellularSessionsActiveProfile	1.3.6.1.4.1.41916.16.1.2.1.5	UnsignedByte	read-only	Active profile
C64 cellularSessionsRxPacketsEx	1.3.6.1.4.1.41916.16.1.2.1.6	Counter64	read-only	Receive packets
C64 cellularSessionsRxDrops	1.3.6.1.4.1.41916.16.1.2.1.7	Counter64	read-only	Receive drops
C64 cellularSessionsRxErrors	1.3.6.1.4.1.41916.16.1.2.1.8	Counter64	read-only	Receive errors
C64 cellularSessionsRxOverflows	1.3.6.1.4.1.41916.16.1.2.1.9	Counter64	read-only	Receive overflows
C64 cellularSessionsTxPackets	1.3.6.1.4.1.41916.16.1.2.1.10	Counter64	read-only	Transmit packets
C64 cellularSessionsTxDrops	1.3.6.1.4.1.41916.16.1.2.1.11	Counter64	read-only	Transmit drops
C64 cellularSessionsTxErrors	1.3.6.1.4.1.41916.16.1.2.1.12	Counter64	read-only	Transmit errors
C64 cellularSessionsTxOverflows	1.3.6.1.4.1.41916.16.1.2.1.13	Counter64	read-only	Transmit overflows
C64 cellularSessionsRxOctets	1.3.6.1.4.1.41916.16.1.2.1.14	Counter64	read-only	Receive octets
C64 cellularSessionsTxOctets	1.3.6.1.4.1.41916.16.1.2.1.15	Counter64	read-only	Transmit octets
IP cellularSessionsIpv4Addr	1.3.6.1.4.1.41916.16.1.2.1.16	IpAddress	read-only	IPv4 address
UNS cellularSessionsIpv4Mask	1.3.6.1.4.1.41916.16.1.2.1.17	UnsignedByte	read-only	IPv4 mask length
IP cellularSessionsIpv4Gw	1.3.6.1.4.1.41916.16.1.2.1.18	IpAddress	read-only	IPv4 gateway
IP cellularSessionsIpv4DnsPri	1.3.6.1.4.1.41916.16.1.2.1.19	IpAddress	read-only	Primary IPv4 DNS server
IP cellularSessionsIpv4DnsSec	1.3.6.1.4.1.41916.16.1.2.1.20	IpAddress	read-only	Secondary IPv4 DNS server
STR cellularSessionsUptime	1.3.6.1.4.1.41916.16.1.2.1.21	String	read-only	Session uptime
cellularNetworkTable	1.3.6.1.4.1.41916.16.1.3		not-accessible	Display cellular network information
cellularNetworkEntry	1.3.6.1.4.1.41916.16.1.3.1		not-accessible
STR cellularNetworkIfName	1.3.6.1.4.1.41916.16.1.3.1.1	String	not-accessible	Interface name
WWA cellularNetworkRegStatus	1.3.6.1.4.1.41916.16.1.3.1.2	WwanRegistrationStatus	read-only	Registration status
STR cellularNetworkRoamStatus	1.3.6.1.4.1.41916.16.1.3.1.3	String	read-only	Roaming status
STR cellularNetworkDomainStatus	1.3.6.1.4.1.41916.16.1.3.1.4	String	read-only	Packet-switched domain state
UNS cellularNetworkMcc	1.3.6.1.4.1.41916.16.1.3.1.5	UnsignedShort	read-only	Mobile country code (MCC)
UNS cellularNetworkMnc	1.3.6.1.4.1.41916.16.1.3.1.6	UnsignedShort	read-only	Mobile network code (MNC)
STR cellularNetworkNwName	1.3.6.1.4.1.41916.16.1.3.1.7	String	read-only	Network name
STR cellularNetworkEmmState	1.3.6.1.4.1.41916.16.1.3.1.8	String	read-only	EPS mobility management (EMM) state
STR cellularNetworkEmmSubstate	1.3.6.1.4.1.41916.16.1.3.1.9	String	read-only	EPS mobility management (EMM) substate
STR cellularNetworkEmmConnstate	1.3.6.1.4.1.41916.16.1.3.1.10	String	read-only	EPS mobility management (EMM) connection state
STR cellularNetworkCellid	1.3.6.1.4.1.41916.16.1.3.1.11	ConfdString	read-only	Cell ID
UNS cellularNetworkTac	1.3.6.1.4.1.41916.16.1.3.1.12	UnsignedShort	read-only	Tracking area code (TAC)
UNS cellularNetworkLac	1.3.6.1.4.1.41916.16.1.3.1.13	UnsignedShort	read-only	Location area code (LAC)
WWA cellularNetworkRadioMode	1.3.6.1.4.1.41916.16.1.3.1.14	WwanRadioEnum	read-only	Radio Mode
UNS cellularNetworkBsic	1.3.6.1.4.1.41916.16.1.3.1.15	UnsignedByte	read-only	Base station identity code (BSIC)
UNS cellularNetworkPsc	1.3.6.1.4.1.41916.16.1.3.1.16	UnsignedShort	read-only	Primary scrambling code (PSC)
UNS cellularNetworkSid	1.3.6.1.4.1.41916.16.1.3.1.17	UnsignedShort	read-only	System ID (SID)
UNS cellularNetworkNid	1.3.6.1.4.1.41916.16.1.3.1.18	UnsignedShort	read-only	Network ID (NID)
UNS cellularNetworkBid	1.3.6.1.4.1.41916.16.1.3.1.19	UnsignedShort	read-only	Base statation ID (BID)
cellularModemTable	1.3.6.1.4.1.41916.16.1.4		not-accessible	Display cellular modem information
cellularModemEntry	1.3.6.1.4.1.41916.16.1.4.1		not-accessible
STR cellularModemIfName	1.3.6.1.4.1.41916.16.1.4.1.1	String	not-accessible	Interface name
STR cellularModemModel	1.3.6.1.4.1.41916.16.1.4.1.2	String	read-only	Model number
STR cellularModemFwVersion	1.3.6.1.4.1.41916.16.1.4.1.3	String	read-only	Firmware version
STR cellularModemFwDate	1.3.6.1.4.1.41916.16.1.4.1.4	String	read-only	Firmware release date
STR cellularModemFwTime	1.3.6.1.4.1.41916.16.1.4.1.5	String	read-only	Firmware release time
STR cellularModemFwPkgVer	1.3.6.1.4.1.41916.16.1.4.1.6	String	read-only	Firmware package version
STR cellularModemFwPkgCarrier	1.3.6.1.4.1.41916.16.1.4.1.7	String	read-only	Firmware package carrier
STR cellularModemFwPkgPri	1.3.6.1.4.1.41916.16.1.4.1.8	String	read-only	Firmware package PRI version
STR cellularModemFwPkgSubver	1.3.6.1.4.1.41916.16.1.4.1.9	String	read-only	Firmware package subversion
STR cellularModemHwVersion	1.3.6.1.4.1.41916.16.1.4.1.10	String	read-only	Hardware version
STR cellularModemModemStatus	1.3.6.1.4.1.41916.16.1.4.1.11	String	read-only	Modem status
BYT cellularModemTemperature	1.3.6.1.4.1.41916.16.1.4.1.12	Byte	read-only	Modem temperature, in degrees C
STR cellularModemImsi	1.3.6.1.4.1.41916.16.1.4.1.13	String	read-only	International mobile subscriber identity (IMSI)
STR cellularModemImei	1.3.6.1.4.1.41916.16.1.4.1.14	String	read-only	International mobile equipment identity (IMEI)
STR cellularModemIccid	1.3.6.1.4.1.41916.16.1.4.1.15	String	read-only	Integrated circuit card ID (ICCID)
STR cellularModemMsisdn	1.3.6.1.4.1.41916.16.1.4.1.16	String	read-only	Mobile subscriber ISDN (MSISDN)
STR cellularModemEsn	1.3.6.1.4.1.41916.16.1.4.1.17	String	read-only	Electronic serial number (ESN)
cellularStatusTable	1.3.6.1.4.1.41916.16.1.5		not-accessible	Display cellular status
cellularStatusEntry	1.3.6.1.4.1.41916.16.1.5.1		not-accessible
STR cellularStatusIfName	1.3.6.1.4.1.41916.16.1.5.1.1	String	not-accessible	Interface name
STR cellularStatusModemStatus	1.3.6.1.4.1.41916.16.1.5.1.2	String	read-only	Modem status
STR cellularStatusSimStatus	1.3.6.1.4.1.41916.16.1.5.1.3	String	read-only	SIM status
WWA cellularStatusRadioMode	1.3.6.1.4.1.41916.16.1.5.1.4	WwanRadioEnum	read-only	Radio Mode
STR cellularStatusSignalStrength	1.3.6.1.4.1.41916.16.1.5.1.5	String	read-only	Signal Strength
WWA cellularStatusNetworkStatus	1.3.6.1.4.1.41916.16.1.5.1.6	WwanRegistrationStatus	read-only	Network registration status
STR cellularStatusLastSeenError	1.3.6.1.4.1.41916.16.1.5.1.7	String	read-only	Last seen error
WWA cellularStatusActivationStatus	1.3.6.1.4.1.41916.16.1.5.1.8	WwanActivationEnum	read-only	Activation status
cellularProfilesTable	1.3.6.1.4.1.41916.16.1.6		not-accessible	Display cellular profile information
cellularProfilesEntry	1.3.6.1.4.1.41916.16.1.6.1		not-accessible
STR cellularProfilesIfName	1.3.6.1.4.1.41916.16.1.6.1.1	String	not-accessible	Interface name
UNS cellularProfilesProfileId	1.3.6.1.4.1.41916.16.1.6.1.2	UnsignedByte	not-accessible	Profile ID
WWA cellularProfilesPdnType	1.3.6.1.4.1.41916.16.1.6.1.3	WwanPdnType	read-only	Packet data network type
STR cellularProfilesApn	1.3.6.1.4.1.41916.16.1.6.1.4	String	read-only	Access point name
STR cellularProfilesName	1.3.6.1.4.1.41916.16.1.6.1.5	String	read-only	Profile name
WWA cellularProfilesAuth	1.3.6.1.4.1.41916.16.1.6.1.6	WwanAuthType	read-only	Authentication
IP cellularProfilesIpAddr	1.3.6.1.4.1.41916.16.1.6.1.7	IpAddress	read-only	Assigned IP address
IP cellularProfilesPrimaryDns	1.3.6.1.4.1.41916.16.1.6.1.8	IpAddress	read-only	Assigned primary DNS address
IP cellularProfilesSecondaryDns	1.3.6.1.4.1.41916.16.1.6.1.9	IpAddress	read-only	Assigned secondary DNS address
STR cellularProfilesUserName	1.3.6.1.4.1.41916.16.1.6.1.10	String	read-only	Profile username
cellularQosTable	1.3.6.1.4.1.41916.16.1.7		not-accessible	Display cellular qos status
cellularQosEntry	1.3.6.1.4.1.41916.16.1.7.1		not-accessible
STR cellularQosIfName	1.3.6.1.4.1.41916.16.1.7.1.1	String	not-accessible	Interface name
U32 cellularQosFlowId	1.3.6.1.4.1.41916.16.1.7.1.2	Unsigned32	read-only	QoS flow identifier
UNS cellularQosBearerId	1.3.6.1.4.1.41916.16.1.7.1.3	UnsignedByte	read-only	Bearer identifier
UNS cellularQosQci	1.3.6.1.4.1.41916.16.1.7.1.4	UnsignedByte	read-only	QoS class identifier
WWA cellularQosBearerStatus	1.3.6.1.4.1.41916.16.1.7.1.5	WwanQosEnum	read-only	Bearer status
cellularFirmwareTable	1.3.6.1.4.1.41916.16.1.8		not-accessible	Display cellular firmware information
cellularFirmwareEntry	1.3.6.1.4.1.41916.16.1.8.1		not-accessible
STR cellularFirmwareIfName	1.3.6.1.4.1.41916.16.1.8.1.1	String	not-accessible	Interface name
UNS cellularFirmwareImageIndex	1.3.6.1.4.1.41916.16.1.8.1.2	UnsignedByte	not-accessible	Image Index
STR cellularFirmwareCarrier	1.3.6.1.4.1.41916.16.1.8.1.3	String	read-only	Carrier
STR cellularFirmwareVersion	1.3.6.1.4.1.41916.16.1.8.1.4	String	read-only	Firmware Version
STR cellularFirmwarePriVersion	1.3.6.1.4.1.41916.16.1.8.1.5	String	read-only	PRI Version
WWA cellularFirmwareImageStatus	1.3.6.1.4.1.41916.16.1.8.1.6	WwanStatusEnum	read-only	Image Status

RFC description

Manages cellular/WWAN connectivity on Viptela SD-WAN devices, providing data model for cellular network management.

Start monitoring Viptela (Cisco SD-WAN) edge devices, cellular WWAN (RSSI/RSRP/SNR signal-quality and session status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download VIPTELA-WWAN