Unisphere-Data-OSPF-MIB

All MIBs › Unisphere-Data-OSPF-MIB

Organization: Unisphere Networks, Inc.

Last Updated: 2002-04-05

Category: Juniper Unisphere ERX Routing

Description: Manages Unisphere ERX OSPF routing protocol areas, interfaces, neighbors, and LSDB information.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is Unisphere-Data-OSPF-MIB?

Unisphere-Data-OSPF-MIB is a Unisphere Networks, Inc. (Juniper ERX edge router heritage) proprietary MIB reporting OSPF protocol configuration and packet statistics. Its objects cover process ID, max path splits, SPF-hold interval, active-area count, last SPF-run time, reference bandwidth, auto-virtual-link flag, intra/inter/external distance, and received/sent Hello/DD/LSR/LSU/LSAck packet counts with total-received/discarded-LSA/total-sent/error-sent/checksum-error counts. As a configuration/performance MIB it lets an administrator confirm OSPF timers and watch protocol-packet exchange volume/errors on a Juniper (Unisphere ERX) edge router. It is deployed on Juniper Networks (Unisphere/ERX) edge routers. Engineers can download the Unisphere-Data-OSPF-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in Unisphere-Data-OSPF-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Juniper Networks (Unisphere/ERX) edge routers

Monitoring Examples

An administrator checks usdOspfLsaDiscardCnt and usdOspfCsumErrPkts to diagnose OSPF LSA processing errors on a Juniper (Unisphere ERX) edge router.

What Can Be Monitored

OSPF timers and protocol-packet statistics/errors

Imported Objects

From IF-MIB

InterfaceIndex

From OSPF-MIB

ospfAddressLessIf
ospfAreaEntry	OBJECT-TYPE
ospfIfEntry
ospfIfIpAddress
ospfNbrEntry
ospfVirtIfEntry

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

RowStatus
TruthValue

From Unisphere-Data-MIBs

usDataMibs

MODULE-IDENTITY

How to Use in IPNetwork Monitor

Example using usdOspfNumActiveAreas OID:

Select a Juniper Networks (Unisphere/ERX) edge router (OSPF timer config/packet-statistics status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type usdOspfNumActiveAreas into the Find box to locate it in the OID tree, then select it and click OK. The number of active areas. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
usdOspfMIB	1.3.6.1.4.1.4874.2.2.14			The OSPF Protocol MIB for the Unisphere Networks Inc. enterprise.
usdOspfObjects	1.3.6.1.4.1.4874.2.2.14.1
usdOspfGeneralGroup	1.3.6.1.4.1.4874.2.2.14.1.1
I32 usdOspfProcessId	1.3.6.1.4.1.4874.2.2.14.1.1.1	Integer32	read-write	An identifier having special semantics when set. When this object's value is zero, OSPF is disabled and cannot be configured. Setting this object to a nonzero value enables OSPF operation and permits further OSPF configuration to be performed. Once set to a nonzero value, this object cannot be modified.
I32 usdOspfMaxPathSplits	1.3.6.1.4.1.4874.2.2.14.1.1.2	Integer32	read-write	The maximum number of equal-cost routes that will be maintained by the OSPF protocol. A change in this value will be taken into account at the next shortest-path-first recalculation.
I32 usdOspfSpfHoldInterval	1.3.6.1.4.1.4874.2.2.14.1.1.3	Integer32	read-write	The minimum amount of time that must elapse between shortest-path-first recalculations. Reducing this value can cause an immediate SPF recalulation if the new value is less than the current value of usdOspfSpfHoldTimeRemaining and other SPF-inducing protocol events have occurred.
C32 usdOspfNumActiveAreasEx	1.3.6.1.4.1.4874.2.2.14.1.1.4	Counter32	read-only	The number of active areas.
C32 usdOspfSpfTime	1.3.6.1.4.1.4874.2.2.14.1.1.5	Counter32	read-only	The SPF schedule delay.
U32 usdOspfRefBw	1.3.6.1.4.1.4874.2.2.14.1.1.6	Unsigned32	read-write	The reference bandwith, in bits per second. This object is used when OSPF automatic interface cost calculation is used.
T/F usdOspfAutoVlink	1.3.6.1.4.1.4874.2.2.14.1.1.7	TruthValue	read-write	Set this object to true(1) in order to have virtual links automatically configured.
I32 usdOspfIntraDistance	1.3.6.1.4.1.4874.2.2.14.1.1.8	Integer32	read-write	Default distance for intra-area routes.
I32 usdOspfInterDistance	1.3.6.1.4.1.4874.2.2.14.1.1.9	Integer32	read-write	Default distance for inter-area routes.
I32 usdOspfExtDistance	1.3.6.1.4.1.4874.2.2.14.1.1.10	Integer32	read-write	Default distance for external type 5 and type 7 routes.
C32 usdOspfHelloPktsRcv	1.3.6.1.4.1.4874.2.2.14.1.1.11	Counter32	read-only	Number of hello packets received.
C32 usdOspfDDPktsRcv	1.3.6.1.4.1.4874.2.2.14.1.1.12	Counter32	read-only	Number of database description packets received.
C32 usdOspfLsrPktsRcv	1.3.6.1.4.1.4874.2.2.14.1.1.13	Counter32	read-only	Number of link state request packets received.
C32 usdOspfLsuPktsRcv	1.3.6.1.4.1.4874.2.2.14.1.1.14	Counter32	read-only	Number of link state update packets received.
C32 usdOspfLsAckPktsRcv	1.3.6.1.4.1.4874.2.2.14.1.1.15	Counter32	read-only	Number of link state ACK packets received.
C32 usdOspfTotalRcv	1.3.6.1.4.1.4874.2.2.14.1.1.16	Counter32	read-only	Number of OSPF packets received.
C32 usdOspfLsaDiscardCnt	1.3.6.1.4.1.4874.2.2.14.1.1.17	Counter32	read-only	Number of LSA packets discarded.
C32 usdOspfHelloPktsSent	1.3.6.1.4.1.4874.2.2.14.1.1.18	Counter32	read-only	Number of hello packets sent.
C32 usdOspfDDPktsSent	1.3.6.1.4.1.4874.2.2.14.1.1.19	Counter32	read-only	Number of database description packets sent.
C32 usdOspfLsrPktsSent	1.3.6.1.4.1.4874.2.2.14.1.1.20	Counter32	read-only	Number of link state request packets sent.
C32 usdOspfLsuPktsSent	1.3.6.1.4.1.4874.2.2.14.1.1.21	Counter32	read-only	Number of link state update packets sent.
C32 usdOspfLsAckPktsSent	1.3.6.1.4.1.4874.2.2.14.1.1.22	Counter32	read-only	Number of link state ACK packets sent.
C32 usdOspfErrPktsSent	1.3.6.1.4.1.4874.2.2.14.1.1.23	Counter32	read-only	Number of packets dropped.
C32 usdOspfTotalSent	1.3.6.1.4.1.4874.2.2.14.1.1.24	Counter32	read-only	Number of OSPF packets sent.
C32 usdOspfCsumErrPkts	1.3.6.1.4.1.4874.2.2.14.1.1.25	Counter32	read-only	Number of packets received with a checksum error.
C32 usdOspfAllocFailNbr	1.3.6.1.4.1.4874.2.2.14.1.1.26	Counter32	read-only	Number of neighbor allocation failures.
C32 usdOspfAllocFailLsa	1.3.6.1.4.1.4874.2.2.14.1.1.27	Counter32	read-only	Number of LSA allocation failures.
C32 usdOspfAllocFailLsd	1.3.6.1.4.1.4874.2.2.14.1.1.28	Counter32	read-only	Number of LSA HDR allocation failures.
C32 usdOspfAllocFailDbRequest	1.3.6.1.4.1.4874.2.2.14.1.1.29	Counter32	read-only	Number of database request allocation failures.
C32 usdOspfAllocFailRtx	1.3.6.1.4.1.4874.2.2.14.1.1.30	Counter32	read-only	Number of RTX allocation failures.
C32 usdOspfAllocFailAck	1.3.6.1.4.1.4874.2.2.14.1.1.31	Counter32	read-only	Number of LS ACK allocation failures.
C32 usdOspfAllocFailDbPkt	1.3.6.1.4.1.4874.2.2.14.1.1.32	Counter32	read-only	Number of DD packet allocation failures.
C32 usdOspfAllocFailCirc	1.3.6.1.4.1.4874.2.2.14.1.1.33	Counter32	read-only	Number of OSPF interface allocation failures.
C32 usdOspfAllocFailPkt	1.3.6.1.4.1.4874.2.2.14.1.1.34	Counter32	read-only	Number of OSPF general packet allocation failures.
T/F usdOspfOperState	1.3.6.1.4.1.4874.2.2.14.1.1.35	TruthValue	read-only	A flag to note whether this router is operational.
U32 usdOspfVpnRouteTag	1.3.6.1.4.1.4874.2.2.14.1.1.36	Unsigned32	read-write	VPN route tag value.
U32 usdOspfDomainId	1.3.6.1.4.1.4874.2.2.14.1.1.37	Unsigned32	read-write	OSPF domain ID.
NUM usdOspfMplsTeRtrIdIfIndex	1.3.6.1.4.1.4874.2.2.14.1.1.38	InterfaceIndex	read-write	Configure the stable router interface id to designate it as TE capable.
usdOspfAreaTable	1.3.6.1.4.1.4874.2.2.14.1.2		not-accessible	The Unisphere OSPF area table describes the OSPF-specific characteristics of areas.
usdOspfAreaEntry	1.3.6.1.4.1.4874.2.2.14.1.2.1		not-accessible	The OSPF area entry describes OSPF-specific characteristics of one area.
INT usdOspfAreaType	1.3.6.1.4.1.4874.2.2.14.1.2.1.1	INTEGER	read-only	The type of this area.
T/F usdOspfAreaTeCapable	1.3.6.1.4.1.4874.2.2.14.1.2.1.2	TruthValue	read-write	Configure the specified area TE capable to flood the TE information.
usdOspfIfTable	1.3.6.1.4.1.4874.2.2.14.1.7		not-accessible	The Unisphere OSPF interface table describes the OSPF-specific characteristics of interfaces.
usdOspfIfEntry	1.3.6.1.4.1.4874.2.2.14.1.7.1		not-accessible	The OSPF interface entry describes OSPF-specific characteristics of one interface.
I32 usdOspfIfCost	1.3.6.1.4.1.4874.2.2.14.1.7.1.1	Integer32	read-create	The cost value for this interface.
IP usdOspfIfMask	1.3.6.1.4.1.4874.2.2.14.1.7.1.2	IpAddress	read-create	The mask used to derive the network range of this interface.
INT usdOspfIfPassiveFlag	1.3.6.1.4.1.4874.2.2.14.1.7.1.3	INTEGER	read-create	Flag to indicate whether routing updates should be suppressed on this interface. To actively perform routing updates, set this object to disabled(0).
C32 usdOspfIfNbrCount	1.3.6.1.4.1.4874.2.2.14.1.7.1.4	Counter32	read-only	Number of OSPF neighbors from this interface.
C32 usdOspfIfAdjNbrCount	1.3.6.1.4.1.4874.2.2.14.1.7.1.5	Counter32	read-only	Number of OSPF adjacent neighbors from this interface.
OCT usdOspfIfMd5AuthKey	1.3.6.1.4.1.4874.2.2.14.1.7.1.6	OCTET STRING	read-create	The MD5 authentication key. When setting this object, the usdOspfIfMd5AuthKeyId must be specified on the same PDU. For simple text authentication type, use ospfIfAuthKey. Setting this object will have the side effect of adding or updating the correspondent entry in usdOspfMd5IntfKeyTable. If key given has less than 16 octets, such value will be appended with zeros to complete 16 octets. The zeros will appended to the right of the given key. Reading this object always results in an OCTET STRING of length zero.
I32 usdOspfIfMd5AuthKeyId	1.3.6.1.4.1.4874.2.2.14.1.7.1.7	Integer32	read-create	The MD5 authentication key ID. When setting this object, usdOspfIfMd5AuthKey must be specified on the same PDU.
usdOspfVirtIfTable	1.3.6.1.4.1.4874.2.2.14.1.9		not-accessible	The Unisphere OSPF virtual interface table describes the OSPF-specific characteristics of virtual interfaces.
usdOspfVirtIfEntry	1.3.6.1.4.1.4874.2.2.14.1.9.1		not-accessible	The OSPF virtual interface entry describes OSPF-specific characteristics of one virtual interface.
OCT usdOspfVirtIfMd5AuthKey	1.3.6.1.4.1.4874.2.2.14.1.9.1.1	OCTET STRING	read-create	The MD5 authentication key. When setting this object, the usdOspfVirtIfMd5AuthKeyId must be specified on the same PDU. For simple text authentication type, use ospfVirtIfAuthKey. Setting this object will have the side effect of adding or updating the correspondent entry in usdOspfMd5IntfKeyTable. If key given has less than 16 octets, such value will be appended with zeros to complete 16 octets. The zeros will appended to the right of the given key. Reading this object always results in an OCTET STRING of length zero.
I32 usdOspfVirtIfMd5AuthKeyId	1.3.6.1.4.1.4874.2.2.14.1.9.1.2	Integer32	read-create	The MD5 authentication key id. When setting this object, usdOspfVirtIfMd5AuthKey must be specified on the same psu.
usdOspfNbrTable	1.3.6.1.4.1.4874.2.2.14.1.10		not-accessible	The Unisphere OSPF neighbor table describes the OSPF-specific characteristics of neighbors.
usdOspfNbrEntry	1.3.6.1.4.1.4874.2.2.14.1.10.1		not-accessible	The OSPF neighbor entry describes OSPF-specific characteristics of one neighbor.
IP usdOspfNbrLocalIpAddr	1.3.6.1.4.1.4874.2.2.14.1.10.1.1	IpAddress	read-only	The local IP address on this OSPF circuit.
IP usdOspfNbrDR	1.3.6.1.4.1.4874.2.2.14.1.10.1.2	IpAddress	read-only	The neighbor's idea of designated router.
IP usdOspfNbrBDR	1.3.6.1.4.1.4874.2.2.14.1.10.1.3	IpAddress	read-only	The neighbor's idea of backup designated router.
usdOspfSummImportTable	1.3.6.1.4.1.4874.2.2.14.1.15		not-accessible	The Unisphere OSPF summary import table describes the OSPF-specific characteristics of network aggregation into the OSPF autonomous system. With this table, the load of advertising many external routes can be reduced by specifying a range which includes some or all of the external routes.
usdOspfSummImportEntry	1.3.6.1.4.1.4874.2.2.14.1.15.1		not-accessible	The OSPF summary import entry describes OSPF-specific characteristics of one summary report.
IP usdOspfSummAggNet	1.3.6.1.4.1.4874.2.2.14.1.15.1.1	IpAddress	read-only	The summary address for a range of addresses.
IP usdOspfSummAggMask	1.3.6.1.4.1.4874.2.2.14.1.15.1.2	IpAddress	read-only	The subnet mask used for the summary route.
INT usdOspfSummAdminStat	1.3.6.1.4.1.4874.2.2.14.1.15.1.3	INTEGER	read-create	The admin status of this summary aggregation.
ROW usdOspfSummRowStatus	1.3.6.1.4.1.4874.2.2.14.1.15.1.4	RowStatus	read-create	This variable displays the status of the entry.
usdOspfMd5IntfTable	1.3.6.1.4.1.4874.2.2.14.1.16		not-accessible	The Unisphere OSPF interface MD5 key table describes OSPF-specific characteristics of the MD5 authentication key for the OSPF interfaces. This table is not to be used for the simple password authentication.
usdOspfMd5IntfEntry	1.3.6.1.4.1.4874.2.2.14.1.16.1		not-accessible	The OSPF interface MD5 key entry describes OSPF-specific characteristics of one MD5 authentication's interface.
I32 usdOspfMd5IntfKeyId	1.3.6.1.4.1.4874.2.2.14.1.16.1.1	Integer32	read-only	The OSPF interface this key belongs to.
T/F usdOspfMd5IntfKeyActive	1.3.6.1.4.1.4874.2.2.14.1.16.1.2	TruthValue	read-create	Set this object to true(1) in order to have this key active.
OCT usdOspfMd5IntfAuthKey	1.3.6.1.4.1.4874.2.2.14.1.16.1.3	OCTET STRING	read-create	The MD5 authentication key. If key given has less than 16 octets, such value will be appended with zeros to complete 16 octets. The zeros will appended to the right of the given key. Reading this object always results in an OCTET STRING of length zero.
ROW usdOspfMd5IntfRowStatus	1.3.6.1.4.1.4874.2.2.14.1.16.1.4	RowStatus	read-create	This variable displays the status of the entry.
usdOspfMd5VirtIntfTable	1.3.6.1.4.1.4874.2.2.14.1.17		not-accessible	The Unisphere OSPF interface MD5 key table describes OSPF-specific characteristics of the MD5 authentication key for the OSPF interfaces. This table is not to be used for the simple password authentication.
usdOspfMd5VirtIntfEntry	1.3.6.1.4.1.4874.2.2.14.1.17.1		not-accessible	The OSPF Interface MD5 Key entry describes OSPF-specific characteristics of one MD5 authentication's interface.
IP usdOspfMd5VirtIntfAreaId	1.3.6.1.4.1.4874.2.2.14.1.17.1.1	IpAddress	read-only	The OSPF area ID this key belongs to.
IP usdOspfMd5VirtIntfNeighbor	1.3.6.1.4.1.4874.2.2.14.1.17.1.2	IpAddress	read-only	The OSPF neightbor this key belongs to.
I32 usdOspfMd5VirtIntfKeyId	1.3.6.1.4.1.4874.2.2.14.1.17.1.3	Integer32	read-only	The OSPF virtual interface this key belongs to.
T/F usdOspfMd5VirtIntfKeyActive	1.3.6.1.4.1.4874.2.2.14.1.17.1.4	TruthValue	read-create	Set this object to true(1) in order to have this key active.
OCT usdOspfMd5VirtIntfAuthKey	1.3.6.1.4.1.4874.2.2.14.1.17.1.5	OCTET STRING	read-create	The MD5 authentication key. If key given has less than 16 octets, such value will be appended with zeros to complete 16 octets. The zeros will appended to the right of the given key. Reading this object always results in an OCTET STRING of length zero.
ROW usdOspfMd5VirtIntfRowStatus	1.3.6.1.4.1.4874.2.2.14.1.17.1.6	RowStatus	read-create	This variable displays the status of the entry.
usdOspfNetworkRangeTable	1.3.6.1.4.1.4874.2.2.14.1.18		not-accessible	The Unisphere OSPF network range table describes the OSPF-specific characteristics of network ranges, encompassing one or multiple OSPF interfaces.
usdOspfNetworkRangeEntry	1.3.6.1.4.1.4874.2.2.14.1.18.1		not-accessible	The Unisphere OSPF network range entry describes OSPF-specific characteristics of one OSPF network range.
IP usdOspfNetRangeNet	1.3.6.1.4.1.4874.2.2.14.1.18.1.1	IpAddress	read-only	The network range address.
IP usdOspfNetRangeMask	1.3.6.1.4.1.4874.2.2.14.1.18.1.2	IpAddress	read-only	The subnet mask used for the network range. Unlike the mask used under the command line interface (CLI), this object is set in the non-inversed format (i.e. not a wild-card mask).
IP usdOspfNetRangeAreaId	1.3.6.1.4.1.4874.2.2.14.1.18.1.3	IpAddress	read-only	The OSPF area ID this network range belongs to.
ROW usdOspfNetRangeRowStatus	1.3.6.1.4.1.4874.2.2.14.1.18.1.4	RowStatus	read-create	This variable displays the status of the entry.
usdOspfConformance	1.3.6.1.4.1.4874.2.2.14.4
usdOspfCompliances	1.3.6.1.4.1.4874.2.2.14.4.1
usdOspfCompliance	1.3.6.1.4.1.4874.2.2.14.4.1.1			Obsolete compliance statement for entities which implement the Unisphere OSPF MIB. This statement became obsolete when usdOspfVpnRouteTag, usdOspfDomainId, usdOspfAreaTeCapable and usdOspfMplsTeRtrIdIfIndex were added to the basic group.
usdOspfCompliance2	1.3.6.1.4.1.4874.2.2.14.4.1.2			The compliance statement for entities which implement the Unisphere OSPF MIB.
usdOspfGroups	1.3.6.1.4.1.4874.2.2.14.4.2
usdOspfBasicGroup	1.3.6.1.4.1.4874.2.2.14.4.2.1			Obsolete collection of objects for managing general OSPF capabilities in a Unisphere product. This group became obsolete when usdOspfVpnRouteTag, usdOspfDomainId, usdOspfAreaTeCapable and usdOspfMplsTeRtrIdIfIndex were added.
usdOspfIfGroup	1.3.6.1.4.1.4874.2.2.14.4.2.2			A collection of objects which augments the standard MIB objects for managing OSPF Interface capabilities in a Unisphere product.
usdOspfAreaGroup	1.3.6.1.4.1.4874.2.2.14.4.2.3			An object which augments the standard MIB objects for managing OSPF areas capabilities in a Unisphere product.
usdOspfVirtIfGroup	1.3.6.1.4.1.4874.2.2.14.4.2.4			A collection of objects which augments the standard MIB objects for managing OSPF virtual interface capabilities in a Unisphere product.
usdOspfNbrGroup	1.3.6.1.4.1.4874.2.2.14.4.2.5			A collection of objects which augments the standard MIB objects for managing OSPF neighbor capabilities in a Unisphere product.
usdOspfSummImportGroup	1.3.6.1.4.1.4874.2.2.14.4.2.6			A collection of objects for managing OSPF summary report capabilities in a Unisphere product.
usdOspfMd5IntfGroup	1.3.6.1.4.1.4874.2.2.14.4.2.7			A collection of objects for managing OSPF MD5 interfaces capabilities in a Unisphere product.
usdOspfMd5VirtIntfGroup	1.3.6.1.4.1.4874.2.2.14.4.2.8			A collection of objects for managing OSPF MD5 virtual interfaces capabilities in a Unisphere product.
usdOspfNetRangeGroup	1.3.6.1.4.1.4874.2.2.14.4.2.9			A collection of objects for managing OSPF network range capabilities in a Unisphere product.
usdOspfBasicGroup2	1.3.6.1.4.1.4874.2.2.14.4.2.10			A collection of objects for managing general OSPF capabilities in a Unisphere product.

RFC description

Juniper Networks (formerly Unisphere) SNMP MIB for OSPF (Open Shortest Path First) routing protocol management. Tracks OSPF-specific neighbor information and routing parameters on Juniper network equipment.

Start monitoring Juniper Networks (Unisphere/ERX) edge routers (OSPF timer config/packet-statistics status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download Unisphere-Data-OSPF-MIB