USR-FR-EXT-MIB

All MIBs › USR-FR-EXT-MIB

Organization: CommWorks Corporation, a 3Com company

Last Updated: 2002-05-14

Category: CommWorks/3Com Access Equipment

Description: Provides extended Frame Relay management objects for CommWorks/3Com broadband access equipment.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is USR-FR-EXT-MIB?

USR-FR-EXT-MIB is a CommWorks (US Robotics/3Com) enterprise MIB providing extended Frame Relay DTE management objects beyond the standard Frame Relay MIB, aimed at their broadband access equipment. It exposes configuration data for Frame Relay point-to-multipoint (PTMP) group arrangements, letting an administrator see how multiple Frame Relay DLCIs are grouped for point-to-multipoint service. Its monitoring role is mainly configuration/software status: confirming PTMP group membership and structure to diagnose why a particular DLCI is not receiving expected multipoint traffic or is misgrouped. It explicitly extends the standard Frame Relay DTE MIB (RFC 2115/1315 lineage), depending on that base MIB for core Frame Relay circuit objects while adding CommWorks-specific PTMP extensions. It is deployed on CommWorks/3Com Frame Relay access equipment used in legacy WAN aggregation networks. Engineers can download the USR-FR-EXT-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in USR-FR-EXT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

CommWorks/3Com Frame Relay access/DTE equipment

Monitoring Examples

An administrator would poll usrfrExtPTMPGroupTable to see which DLCIs are grouped together for point-to-multipoint Frame Relay service on a given interface. A DLCI missing from its expected group entry would explain why traffic intended for a multipoint distribution is not reaching a particular remote site, pointing to a provisioning error in the PTMP grouping rather than a physical circuit fault.

What Can Be Monitored

Frame Relay PTMP group membership
DLCI grouping configuration

Imported Objects

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

DisplayString
RowStatus
TimeStamp
TruthValue

From USR-DEFINITIONS-MIB

UsrConfigStatus
UsrDisplayString
common	OBJECT-IDENTITY

How to Use in IPNetwork Monitor

Example using usrfrExtCircuitTxFramesCongested OID:

Select a CommWorks/3Com Frame Relay access/DTE equipment (PTMP group-membership config status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type usrfrExtCircuitTxFramesCongested into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the number of frames congested by a physical driver during transmit action taken by this PVC since it was created. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
usrFRExt	1.3.6.1.4.1.429.4.64			The CommWorks Frame Relay DTE MIB Extensions
STR usrfrExtBaseCfgFileName	1.3.6.1.4.1.429.4.64.1	UsrDisplayString	read-only	The name of a Frame Relay ConfigFile to read/write permanent database records. If the value of this object is an empty string, then the FR process uses the default name '@file://FrFile.cfg'.
USR usrfrExtBaseCFMSaveStatus	1.3.6.1.4.1.429.4.64.2	UsrConfigStatus	read-write	Setting the value of this object to 'save' causes the values of the FR Base Group entries to be written out to the current FR configuration file. While the new configuration file is being written, the FR process will set the value of this flag set to 'saving'. Any attempts to set the value while it is not 'normal' (i.e. the file is currently being written to the config file) will result in a badValue error being returned. Setting the value to 'normal' will result in no action.
INT usrfrExtBaseConformanceOption	1.3.6.1.4.1.429.4.64.3	INTEGER	read-write	This variable indicates the Conformance Option of the Frame Relay Datalink.
usrfrExtDlcmiTable	1.3.6.1.4.1.429.4.64.4		not-accessible	The Parameters for the Data Link Connection Management Interface for the frame relay service on this interface.
usrfrExtDlcmiEntry	1.3.6.1.4.1.429.4.64.4.1		not-accessible	The Parameters for a particular Data Link Connection Management Interface.
IND usrfrExtDlcmiIfIndex	1.3.6.1.4.1.429.4.64.4.1.1	Index	read-only	The ifIndex value of the corresponding ifEntry.
INT usrfrExtDlcmiOperStatus	1.3.6.1.4.1.429.4.64.4.1.2	INTEGER	read-only	This variable indicates the operational status of the Frame Relay link. The Status is determined by a success or failure of the LMI message exchange with the Frame Relay switch, the WAN Interface state and Administrator Link State.
INT usrfrExtDlcmiMaximumTransferUnit	1.3.6.1.4.1.429.4.64.4.1.3	INTEGER	read-write	This is the largest number of bytes the Frame Relay DLL Layer will attempt to transmit through its physical interface in a single frame.
INT usrfrExtDlcmiAccessRate	1.3.6.1.4.1.429.4.64.4.1.4	INTEGER	read-write	This is the speed of access channel, a Frame Relay DLL Layer will use for data transfer. This value is expressed in bits per second. If value 0 is selected, then the Access Rate value used by Frame Relay to its calculations will be taken from physical WAN driver.
INT usrfrExtDlcmiNewPVCLearning	1.3.6.1.4.1.429.4.64.4.1.5	INTEGER	read-write	This indicates if the Frame Relay interface can dynamically create a new PVC based on information received in LMI Full Status message.
INT usrfrExtDlcmiTrace	1.3.6.1.4.1.429.4.64.4.1.6	INTEGER	read-write	This indicates if the LMI Protocol frames trace information will be displayed on the console.
usrfrExtCircuitTable	1.3.6.1.4.1.429.4.64.5		not-accessible	A table containing information about specific virtual circuits.
usrfrExtCircuitEntry	1.3.6.1.4.1.429.4.64.5.1		not-accessible	The information regarding a single Data Link Connection Identifier.
IND usrfrExtCircuitIfIndex	1.3.6.1.4.1.429.4.64.5.1.1	Index	read-only	The ifIndex value of the ifEntry this virtual circuit is layered onto.
DLC usrfrExtCircuitDlci	1.3.6.1.4.1.429.4.64.5.1.2	DLCI	read-only	The Data Link Connection Identifier for this virtual circuit.
INT usrfrExtCircuitOperStatus	1.3.6.1.4.1.429.4.64.5.1.3	INTEGER	read-only	The current operational state of the FR PVC. The disabled(3) state indicates that no operational packets can be passed through this PVC. It reflects the fact that CircuitAdminStatus is disabled. The up(1) describes a state when packets can be sent and received on the PVC. The down(2) indicates that PVC is not able to operate. The up(1) and down(2) states are set up based on LMI PVCS IE.
INT usrfrExtCircuitCIR	1.3.6.1.4.1.429.4.64.5.1.4	INTEGER	read-write	Committed Information Rate (CIR) describes how congestion control is handled. Off indicates that no attempt at transmit control is made. On indicates that Frame Relay is monitoring amount of data transmitted through the physical interface and restricts this according to CIR rules.
INT usrfrExtCircuitBcMax	1.3.6.1.4.1.429.4.64.5.1.5	INTEGER	read-write	The Committed Burst Size is the maximum amount of data (in bits) that the user may offer to the network, under normal conditions, during a time interval Tc. The BcMax value defines the upper boundary of current Bc value.
INT usrfrExtCircuitBcMin	1.3.6.1.4.1.429.4.64.5.1.6	INTEGER	read-write	The Committed Burst Size is the maximum amount of data (in bits) that the user may offer to the network, under normal conditions, during a time interval Tc. The BcMin value defines the lower boundary of current Bc value.
INT usrfrExtCircuitCurrentBc	1.3.6.1.4.1.429.4.64.5.1.7	INTEGER	read-only	The Committed Burst Size is the maximum amount of data (in bits) that the user may offer to the network, under normal conditions, during a time interval Tc. The CurrentBc value represents currently used Bc value.
INT usrfrExtCircuitTc	1.3.6.1.4.1.429.4.64.5.1.8	INTEGER	read-only	The Committed Rate Measurement Interval is a time interval during which the user is allowed to send only the committed amount of date (Bc) and the excess amount of data (Be). This value is calculated and is expressed in milliseconds.
INT usrfrExtCircuitBECNMonitoring	1.3.6.1.4.1.429.4.64.5.1.9	INTEGER	read-write	BECN Monitoring describes if BECN congestion notification control is handled. Off indicates that no attempt at congestion notification control is made. On indicates that the BECN bit of the Q.922 header is monitored. When the BECN bit indicates that the Frame Relay switch is experiencing congestion over this DLCI, the transmission rate will be slowed, to value calculated based on usrfrCircuitBcMin. When the bit indicates alleviation of congestion, the transmission rate will be incrementally increased back to a value calculated based on usrfrCircuitBcMax.
INT usrfrExtCircuitCMP	1.3.6.1.4.1.429.4.64.5.1.10	INTEGER	read-write	The Congestion Monitoring Period - is a period expressed in seconds, during which Frame Relay monitors number of received BECN events.
C32 usrfrExtCircuitTxFramesCongestedEx	1.3.6.1.4.1.429.4.64.5.1.11	Counter32	read-only	Number of frames congested by a physical driver during transmit action taken by this PVC since it was created.
C32 usrfrExtCircuitTxOctetsCongested	1.3.6.1.4.1.429.4.64.5.1.12	Counter32	read-only	Number of bytes congested by a physical driver during transmit action taken by this PVC since it was created.
C32 usrfrExtCircuitTxFramesDiscarded	1.3.6.1.4.1.429.4.64.5.1.13	Counter32	read-only	Number of frames discarded during transmit action by this PVC since it was created.
C32 usrfrExtCircuitTxOctetsDiscarded	1.3.6.1.4.1.429.4.64.5.1.14	Counter32	read-only	Number of bytes discarded during transmit action by this PVC since it was created.
C32 usrfrExtCircuitTxFramesFromForwarder	1.3.6.1.4.1.429.4.64.5.1.15	Counter32	read-only	Number of frames handed down from forwarder to this PVC since it was created.
C32 usrfrExtCircuitTxOctetsFromForwarder	1.3.6.1.4.1.429.4.64.5.1.16	Counter32	read-only	Number of bytes handed down from forwarder to this PVC since it was created.
C32 usrfrExtCircuitRxFramesCongested	1.3.6.1.4.1.429.4.64.5.1.17	Counter32	read-only	Number of frames congested by a forwarder during receive action taken by this PVC since it was created.
C32 usrfrExtCircuitRxOctetsCongested	1.3.6.1.4.1.429.4.64.5.1.18	Counter32	read-only	Number of bytes congested by a forwarder during receive action taken by this PVC since it was created.
C32 usrfrExtCircuitRxOctetsDiscarded	1.3.6.1.4.1.429.4.64.5.1.19	Counter32	read-only	Number of bytes discarded during receive action by this PVC since it was created.
C32 usrfrExtCircuitRxFramesByForwarder	1.3.6.1.4.1.429.4.64.5.1.20	Counter32	read-only	Number of frames passed to forwarder by this PVC since it was created.
C32 usrfrExtCircuitRxOctetsByForwarder	1.3.6.1.4.1.429.4.64.5.1.21	Counter32	read-only	Number of bytes passed to forwarder by this PVC since it was created.
C32 usrfrExtCircuitTxIPProtocolFrames	1.3.6.1.4.1.429.4.64.5.1.22	Counter32	read-only	Number of IP protocol frames sent by this PVC since it was created.
C32 usrfrExtCircuitRxIPProtocolFrames	1.3.6.1.4.1.429.4.64.5.1.23	Counter32	read-only	Number of IP protocol frames received by this PVC since it was created.
C32 usrfrExtCircuitTxIPXProtocolFrames	1.3.6.1.4.1.429.4.64.5.1.24	Counter32	read-only	Number of IPX protocol frames sent by this PVC since it was created.
C32 usrfrExtCircuitRxIPXProtocolFrames	1.3.6.1.4.1.429.4.64.5.1.25	Counter32	read-only	Number of IPX protocol frames received by this PVC since it was created.
C32 usrfrExtCircuitTxATProtocolFrames	1.3.6.1.4.1.429.4.64.5.1.26	Counter32	read-only	Number of AppleTalk protocol frames sent by this PVC since it was created.
C32 usrfrExtCircuitRxATProtocolFrames	1.3.6.1.4.1.429.4.64.5.1.27	Counter32	read-only	Number of AppleTalk protocol frames received by this PVC since it was created.
C32 usrfrExtCircuitTxBridgedFrames	1.3.6.1.4.1.429.4.64.5.1.28	Counter32	read-only	Number of Bridged frames sent by this PVC since it was created.
C32 usrfrExtCircuitRxBridgedFrames	1.3.6.1.4.1.429.4.64.5.1.29	Counter32	read-only	Number of Bridged frames received by this PVC since it was created.
STR usrfrExtCircuitPVCName	1.3.6.1.4.1.429.4.64.5.1.30	DisplayString	read-write	The name of this PVC. This table allows the Pilgrim CLI process to translate PVC name into IfIndex/DLCI pair.
INT usrfrExtCircuitTrace	1.3.6.1.4.1.429.4.64.5.1.31	INTEGER	read-write	This indicates if the Frame Relay data frames trace information will be displayed on the console for this PVC.
INT usrfrExtCircuitBECNRatio	1.3.6.1.4.1.429.4.64.5.1.32	INTEGER	read-write	BECN/(BECN + NO_BECN) percentage ratio used by BECN Monitoring mechanism to make a BC adjustment decision for this PVC. It is expressed in percents.
C32 usrfrExtCircuitTxL2TPProtocolFrames	1.3.6.1.4.1.429.4.64.5.1.33	Counter32	read-only	Number of L2TP Protocol frames sent by this PVC since it was created.
C32 usrfrExtCircuitRxL2TPProtocolFrames	1.3.6.1.4.1.429.4.64.5.1.34	Counter32	read-only	Number of L2TP Protocol frames received by this PVC since it was created.
T/F usrfrExtCircuitPTMPGroupState	1.3.6.1.4.1.429.4.64.5.1.35	TruthValue	read-only	Determines whether this PVC is attached to a PTMP Group or not
STR usrfrExtCircuitPTMPGroupName	1.3.6.1.4.1.429.4.64.5.1.36	DisplayString	read-only	Name of the Point-to-Multipoint group this PVC is assiciated with
usrfrExtErrTable	1.3.6.1.4.1.429.4.64.6		not-accessible	A table containing information about Errors on the Frame Relay interface.
usrfrExtErrEntry	1.3.6.1.4.1.429.4.64.6.1		not-accessible	The error information for a single Frame Relay interface.
IND usrfrExtErrIfIndex	1.3.6.1.4.1.429.4.64.6.1.1	Index	read-only	The ifIndex Value of the ifEntry this virtual circuit is layered onto.
C32 usrfrExtErrUnknownError	1.3.6.1.4.1.429.4.64.6.1.2	Counter32	read-only	An error which is not specified by another counter.
C32 usrfrExtErrReceivedShortFrames	1.3.6.1.4.1.429.4.64.6.1.3	Counter32	read-only	Number of frames discarded because they were too short.
C32 usrfrExtErrReceivedLongFrames	1.3.6.1.4.1.429.4.64.6.1.4	Counter32	read-only	Number of frames discarded because they were too long.
C32 usrfrExtErrIllegalDlcis	1.3.6.1.4.1.429.4.64.6.1.5	Counter32	read-only	Number of frames discarded because they contained illegal DLCIs.
C32 usrfrExtErrUnknownDlcis	1.3.6.1.4.1.429.4.64.6.1.6	Counter32	read-only	Number of frames discarded because they contained unknown DLCIs.
C32 usrfrExtErrDlmciProtocolErrs	1.3.6.1.4.1.429.4.64.6.1.7	Counter32	read-only	Number of Frame Relay protocol errors.
C32 usrfrExtStatDLLRxFrames	1.3.6.1.4.1.429.4.64.6.1.8	Counter32	read-only	Number of Frame Relay frames received on this DLL.
C32 usrfrExtStatDLLRxOctets	1.3.6.1.4.1.429.4.64.6.1.9	Counter32	read-only	Number of bytes received on this DLL.
C32 usrfrExtStatDLLTxFrames	1.3.6.1.4.1.429.4.64.6.1.10	Counter32	read-only	Number of Frame Relay frames transmitted on this DLL.
C32 usrfrExtStatDLLTxOctets	1.3.6.1.4.1.429.4.64.6.1.11	Counter32	read-only	Number of octets transmitted on this DLL.
C32 usrfrExtStatLMIRxFrames	1.3.6.1.4.1.429.4.64.6.1.12	Counter32	read-only	Number of Frame Relay LMI frames received on this DLL.
C32 usrfrExtStatLMITxFrames	1.3.6.1.4.1.429.4.64.6.1.13	Counter32	read-only	Number of Frame Relay LMI frames transmitted on this DLL.
C32 usrfrExtStatLMIRxStatusEnquiry	1.3.6.1.4.1.429.4.64.6.1.14	Counter32	read-only	Number of Frame Relay LMI Status Enquiry frames receiveded on this DLL.
C32 usrfrExtStatLMITxStatusEnquiry	1.3.6.1.4.1.429.4.64.6.1.15	Counter32	read-only	Number of Frame Relay LMI Status Enquiry frames transmitted on this DLL.
C32 usrfrExtStatLMIRxStatus	1.3.6.1.4.1.429.4.64.6.1.16	Counter32	read-only	Number of Frame Relay LMI Status frames received on this DLL.
C32 usrfrExtStatLMITxStatus	1.3.6.1.4.1.429.4.64.6.1.17	Counter32	read-only	Number of Frame Relay LMI Status frames transmitted on this DLL.
C32 usrfrExtStatLMIRxStatusUpdate	1.3.6.1.4.1.429.4.64.6.1.18	Counter32	read-only	Number of Frame Relay LMI Status Update frames received on this DLL.
C32 usrfrExtErrLMINoNetworkResponse	1.3.6.1.4.1.429.4.64.6.1.19	Counter32	read-only	Number of lacks of Network responses to LMI Status Enquiry frames sent on this DLL.
C32 usrfrExtErrLMIInvQ922	1.3.6.1.4.1.429.4.64.6.1.20	Counter32	read-only	Number of LMI frames with invalid Q922 header received on this DLL.
C32 usrfrExtErrLMIInvControlField	1.3.6.1.4.1.429.4.64.6.1.21	Counter32	read-only	Number of LMI frames with invalid Control Field received on this DLL.
C32 usrfrExtErrLMIInvProtocolDiscr	1.3.6.1.4.1.429.4.64.6.1.22	Counter32	read-only	Number of LMI frames with invalid Protocol Discriominator field received on this DLL.
C32 usrfrExtErrLMIInvCallReference	1.3.6.1.4.1.429.4.64.6.1.23	Counter32	read-only	Number of LMI frames with invalid Call Reference field received on this DLL.
C32 usrfrExtErrLMIInvMessageType	1.3.6.1.4.1.429.4.64.6.1.24	Counter32	read-only	Number of LMI frames with invalid Message Type field received on this DLL.
C32 usrfrExtErrLMIInvLockingShift	1.3.6.1.4.1.429.4.64.6.1.25	Counter32	read-only	Number of LMI frames with invalid Locking Shift IE received on this DLL.
C32 usrfrExtErrLMIInvReportType	1.3.6.1.4.1.429.4.64.6.1.26	Counter32	read-only	Number of LMI frames with invalid Report Type IE received on this DLL.
C32 usrfrExtErrLMIInvLIV	1.3.6.1.4.1.429.4.64.6.1.27	Counter32	read-only	Number of LMI frames with invalid Link Integrity Verification IE received on this DLL.
C32 usrfrExtErrLMIInvSeqNum	1.3.6.1.4.1.429.4.64.6.1.28	Counter32	read-only	Number of LMI frames with invalid Sequence Number field received on this DLL.
C32 usrfrExtErrLMIInvPVCStatus	1.3.6.1.4.1.429.4.64.6.1.29	Counter32	read-only	Number of LMI frames with invalid PVC Status IE received on this DLL.
C32 usrfrExtErrLMIUnsolicitedMessage	1.3.6.1.4.1.429.4.64.6.1.30	Counter32	read-only	Number of unsolicited LMI frames received on this DLL.
C32 usrfrExtErrLMIUnrecognizedIE	1.3.6.1.4.1.429.4.64.6.1.31	Counter32	read-only	Number of LMI frames with unrecognized IE received on this DLL.
C32 usrfrExtErrLMIIncompleteMessage	1.3.6.1.4.1.429.4.64.6.1.32	Counter32	read-only	Number of LMI frames with incomplete current IE received on this DLL.
C32 usrfrExtErrLMIOutOfOrderIE	1.3.6.1.4.1.429.4.64.6.1.33	Counter32	read-only	Number of LMI frames with out_of_order IE received on this DLL.
C32 usrfrExtErrLMIInvSpareBits	1.3.6.1.4.1.429.4.64.6.1.34	Counter32	read-only	Number of LMI frames with invalid Spare Bits values in IE received on this DLL.
C32 usrfrExtErrLMIInvExtensionBit	1.3.6.1.4.1.429.4.64.6.1.35	Counter32	read-only	Number of LMI frames with invalid Extension Bit value in IE received on this DLL.
C32 usrfrExtErrLMIInvNADBits	1.3.6.1.4.1.429.4.64.6.1.36	Counter32	read-only	Number of LMI frames with invalid New, Active or Delete bits in PVCS IE received on this DLL.
C32 usrfrExtStatLMIRxAsyncStatus	1.3.6.1.4.1.429.4.64.6.1.37	Counter32	read-only	Number of LMI Async Status frames received on this DLL.
usrfrExtTraps	1.3.6.1.4.1.429.4.64.7
NTF usrfrExtDLCMIStatusChange	1.3.6.1.4.1.429.4.64.7.1			This trap indicates that the indicated Data Link Layer has changed state. It has either been created or invalidated, or has toggled between the active and inactive states.
NTF usrfrExtPTMPGroupStatusChange	1.3.6.1.4.1.429.4.64.7.2			This trap indicates that the indicated PTMP PVC Group has changed its state. It has either been created or invalidated, or has toggled between the active and inactive states.
usrfrExtPTMPGroupTable	1.3.6.1.4.1.429.4.64.8		not-accessible	A table containing information about PTMP PVC Group specific
usrfrExtPTMPGroupEntry	1.3.6.1.4.1.429.4.64.8.1		not-accessible	The information regarding a single PTMP PVC Group entry.
STR usrfrExtPTMPGroupName	1.3.6.1.4.1.429.4.64.8.1.1	DisplayString	read-only	The name of the PTMP PVC Group. It is a unique name used as a index to PTMP PVC Group Table.
IND usrfrExtPTMPGroupIndex	1.3.6.1.4.1.429.4.64.8.1.2	Index	read-only	Logical Index used by a PVC as a reference to a PTMP PVC Group. This index is a unique number.
INT usrfrExtPTMPGroupOperStatus	1.3.6.1.4.1.429.4.64.8.1.3	INTEGER	read-only	The current operational state of the PTMP PVC Group. The disabled(3) state indicates that no data packets can be passed through this PTMP PVC Group. It reflects the fact that RowStatus is set to notInService. The up(1) describes a state when packets can be sent and received on the PTMP PVC Group. The down(2) indicates that PTMP PVC Group is not able to operate. The up(1) and down(2) states are set up based on status of all PVC participating in this Group.
C32 usrfrExtPTMPNumberOfPVCs	1.3.6.1.4.1.429.4.64.8.1.4	Counter32	read-only	Number of PVCs associated with this PTMP PVC Group.
C32 usrfrExtPTMPTxUcastFrames	1.3.6.1.4.1.429.4.64.8.1.5	Counter32	read-only	Number of unicast frames sent by a forwarder to this PTMP PVC Group, since it was enabled.
C32 usrfrExtPTMPTxUcastOctets	1.3.6.1.4.1.429.4.64.8.1.6	Counter32	read-only	Number of octets in unicast frames sent by a forwarder to this PTMP PVC Group, since it was enabled.
C32 usrfrExtPTMPTxMcastFrames	1.3.6.1.4.1.429.4.64.8.1.7	Counter32	read-only	Number of multicast frames sent by a forwarder to this PTMP PVC Group, since it was enabled.
C32 usrfrExtPTMPTxMcastOctets	1.3.6.1.4.1.429.4.64.8.1.8	Counter32	read-only	Number of octets in multicast frames sent by a forwarder to this PTMP PVC Group, since it was enabled.
C32 usrfrExtPTMPTxDiscardedFrames	1.3.6.1.4.1.429.4.64.8.1.9	Counter32	read-only	Number of frames discarded, which were sent by forwarder to this PTMP PVC Group, since it was enabled.
C32 usrfrExtPTMPTxDiscardedOctets	1.3.6.1.4.1.429.4.64.8.1.10	Counter32	read-only	Number of octets in a discarded frames sent by a forwarder to this PTMP PVC Group, since it was enabled.
C32 usrfrExtPTMPRxFrames	1.3.6.1.4.1.429.4.64.8.1.11	Counter32	read-only	Number of frames received from all associated PVCS by this PTMP PVC Group, since it was enabled.
C32 usrfrExtPTMPRxOctets	1.3.6.1.4.1.429.4.64.8.1.12	Counter32	read-only	Number of octets received from all associated PVCS by this PTMP PVC Group, since it was enabled.
C32 usrfrExtPTMPRxCongestedFrames	1.3.6.1.4.1.429.4.64.8.1.13	Counter32	read-only	Number of frames received from all associated PVCS, which were congested by the forwarder on attempt of passing them by PTMP PVC Group, since the group was enabled.
C32 usrfrExtPTMPRxCongestedOctets	1.3.6.1.4.1.429.4.64.8.1.14	Counter32	read-only	Number of octets in frames received from all associated PVCS, which were congested by the forwarder on attempt of passing them by PTMP PVC Group, since the group was enabled.
C32 usrfrExtPTMPRxDiscardedFrames	1.3.6.1.4.1.429.4.64.8.1.15	Counter32	read-only	Number of received frames from all associated PVCs which were discarded by this PTMP PVC Group, since it was enabled.
C32 usrfrExtPTMPRxDiscardedOctets	1.3.6.1.4.1.429.4.64.8.1.16	Counter32	read-only	Number of octets in a received frames from all associated PVCs which were discarded by this PTMP PVC Group, since it was enabled.
C32 usrfrExtPTMPTxIPProtocolFrames	1.3.6.1.4.1.429.4.64.8.1.17	Counter32	read-only	Number of IP protocol frames sent by this PTMP PVC Group since it was enabled.
C32 usrfrExtPTMPRxIPProtocolFrames	1.3.6.1.4.1.429.4.64.8.1.18	Counter32	read-only	Number of IP protocol frames received by this PTMP PVC Group since it was enabled.
C32 usrfrExtPTMPTxIPXProtocolFrames	1.3.6.1.4.1.429.4.64.8.1.19	Counter32	read-only	Number of IPX protocol frames sent by this PTMP PVC Group since it was enabled.
C32 usrfrExtPTMPRxIPXProtocolFrames	1.3.6.1.4.1.429.4.64.8.1.20	Counter32	read-only	Number of IPX protocol frames received by this PTMP PVC Group since it was enabled.
C32 usrfrExtPTMPTxATProtocolFrames	1.3.6.1.4.1.429.4.64.8.1.21	Counter32	read-only	Number of AppleTalk protocol frames sent by this PTMP PVC Group since it was enabled.
C32 usrfrExtPTMPRxATProtocolFrames	1.3.6.1.4.1.429.4.64.8.1.22	Counter32	read-only	Number of AppleTalk protocol frames received by this PTMP PVC Group since it was enabled.
C32 usrfrExtPTMPTxBridgedFrames	1.3.6.1.4.1.429.4.64.8.1.23	Counter32	read-only	Number of Bridged frames sent by this PTMP PVC Group since it was enabled.
C32 usrfrExtPTMPRxBridgedFrames	1.3.6.1.4.1.429.4.64.8.1.24	Counter32	read-only	Number of Bridged frames received by this PTMP PVC Group since it was enabled.
C32 usrfrExtPTMPTxL2TPProtocolFrames	1.3.6.1.4.1.429.4.64.8.1.25	Counter32	read-only	Number of L2TP Protocol frames sent by this PTMP PVC Group since it was enabled.
C32 usrfrExtPTMPRxL2TPProtocolFrames	1.3.6.1.4.1.429.4.64.8.1.26	Counter32	read-only	Number of L2TP Protocol frames received by this PTMP PVC Group since it was enabled.
TIM usrfrExtPTMPCreationTime	1.3.6.1.4.1.429.4.64.8.1.27	TimeStamp	read-only	The value of sysUpTime when this PTMP PVC Group was created.
TIM usrfrExtPTMPLastTimeChange	1.3.6.1.4.1.429.4.64.8.1.28	TimeStamp	read-only	The value of sysUpTime when last there was a change in this PTMP PVC Group state.
ROW usrfrExtPTMPRowStatus	1.3.6.1.4.1.429.4.64.8.1.29	RowStatus	read-write	This object is used to create a new row or destroy or modify an existing row in a manner described in the definition of the RowStatus textual convention.
INT usrfrExtPTMPTrace	1.3.6.1.4.1.429.4.64.8.1.30	INTEGER	read-write	This indicates if the Frame Relay data frames trace information will be displayed on the console for this PTMP PVC Group.

RFC description

Extends Frame Relay DTE MIB support with CommWorks/3Com configuration and status management for Frame Relay datalink connections.

Start monitoring CommWorks/3Com Frame Relay access/DTE equipment (PTMP group-membership config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download USR-FR-EXT-MIB