USR-FR-EXT-MIB DEFINITIONS ::= BEGIN IMPORTS UsrDisplayString, UsrConfigStatus, common FROM USR-DEFINITIONS-MIB MODULE-IDENTITY, NOTIFICATION-TYPE, Integer32, Counter32, OBJECT-TYPE FROM SNMPv2-SMI DisplayString, RowStatus, TimeStamp, TruthValue FROM SNMPv2-TC; -- Frame Relay DTE MIB Extensions -- -- the range of ifIndex -- Index ::= Integer32 -- 1..ifNumber -- -- the range of a Data Link Connection Identifier -- DLCI ::= INTEGER(16..1023) -- 0..DLCINumber -- -- The Frame Relay Base Group. -- usrFRExt MODULE-IDENTITY LAST-UPDATED "200205141520Z" ORGANIZATION "CommWorks Corporation, a 3Com company" CONTACT-INFO "Customer Support" DESCRIPTION "The CommWorks Frame Relay DTE MIB Extensions" -- REVISION "200205141520Z" -- DESCRIPTION "Add structured trap comments" ::= { common 64 } usrfrExtBaseCfgFileName OBJECT-TYPE SYNTAX UsrDisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of a Frame Relay ConfigFile to read/write permanent database records. If the value of this object is an empty string, then the FR process uses the default name '@file://FrFile.cfg'." ::= { usrFRExt 1 } usrfrExtBaseCFMSaveStatus OBJECT-TYPE SYNTAX UsrConfigStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Setting the value of this object to 'save' causes the values of the FR Base Group entries to be written out to the current FR configuration file. While the new configuration file is being written, the FR process will set the value of this flag set to 'saving'. Any attempts to set the value while it is not 'normal' (i.e. the file is currently being written to the config file) will result in a badValue error being returned. Setting the value to 'normal' will result in no action." ::= { usrFRExt 2 } -- -- Frame Relay Conformance Options -- usrfrExtBaseConformanceOption OBJECT-TYPE SYNTAX INTEGER { sprint (1), idacom (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable indicates the Conformance Option of the Frame Relay Datalink." DEFVAL { 2 } --CONFIGURABLE ::= { usrFRExt 3 } -- -- Data Link Connection Management Interface Extensions -- -- The variables that configure the DLC Management Interface. -- usrfrExtDlcmiTable OBJECT-TYPE SYNTAX SEQUENCE OF UsrFrExtDlcmiEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Parameters for the Data Link Connection Management Interface for the frame relay service on this interface." REFERENCE "Draft American National Standard T1.617-1991, Annex D" ::= { usrFRExt 4 } usrfrExtDlcmiEntry OBJECT-TYPE SYNTAX UsrFrExtDlcmiEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Parameters for a particular Data Link Connection Management Interface." INDEX { usrfrExtDlcmiIfIndex } ::= { usrfrExtDlcmiTable 1 } UsrFrExtDlcmiEntry ::= SEQUENCE { usrfrExtDlcmiIfIndex Index, usrfrExtDlcmiOperStatus INTEGER, usrfrExtDlcmiMaximumTransferUnit INTEGER, usrfrExtDlcmiAccessRate INTEGER, usrfrExtDlcmiNewPVCLearning INTEGER, usrfrExtDlcmiTrace INTEGER } usrfrExtDlcmiIfIndex OBJECT-TYPE SYNTAX Index MAX-ACCESS read-only STATUS current DESCRIPTION "The ifIndex value of the corresponding ifEntry." ::= { usrfrExtDlcmiEntry 1 } usrfrExtDlcmiOperStatus OBJECT-TYPE SYNTAX INTEGER { ready (1), waitForDriver (2), recovery (3), down (4), disabled (5) } MAX-ACCESS read-only STATUS current DESCRIPTION "This variable indicates the operational status of the Frame Relay link. The Status is determined by a success or failure of the LMI message exchange with the Frame Relay switch, the WAN Interface state and Administrator Link State." ::= { usrfrExtDlcmiEntry 2 } usrfrExtDlcmiMaximumTransferUnit OBJECT-TYPE SYNTAX INTEGER (260..2048) MAX-ACCESS read-write STATUS current DESCRIPTION "This is the largest number of bytes the Frame Relay DLL Layer will attempt to transmit through its physical interface in a single frame." DEFVAL { 1600 } --CONFIGURABLE ::= { usrfrExtDlcmiEntry 3 } usrfrExtDlcmiAccessRate OBJECT-TYPE SYNTAX INTEGER (0..8192000) MAX-ACCESS read-write STATUS current DESCRIPTION "This is the speed of access channel, a Frame Relay DLL Layer will use for data transfer. This value is expressed in bits per second. If value 0 is selected, then the Access Rate value used by Frame Relay to its calculations will be taken from physical WAN driver." REFERENCE "CCITT Recommendation I.370, Section 1.2 access rate" DEFVAL { 1544000 } --CONFIGURABLE ::= { usrfrExtDlcmiEntry 4 } usrfrExtDlcmiNewPVCLearning OBJECT-TYPE SYNTAX INTEGER { on (1), off (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This indicates if the Frame Relay interface can dynamically create a new PVC based on information received in LMI Full Status message." DEFVAL { 2 } --CONFIGURABLE ::= { usrfrExtDlcmiEntry 5 } usrfrExtDlcmiTrace OBJECT-TYPE SYNTAX INTEGER { on (1), off (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This indicates if the LMI Protocol frames trace information will be displayed on the console." DEFVAL { 2 } --CONFIGURABLE ::= { usrfrExtDlcmiEntry 6 } -- A Frame Relay service is a multiplexing service. Data -- Link Connection Identifiers enumerate virtual circuits -- (permanent or switched) which are layered onto the underlying -- interface, represented by ifEntry. Therefore, each of the entries -- in the Standard MIB's Interface Table with an IfType of -- Frame Relay represents a Q.922 interface. Zero or more -- virtual circuits are layered onto this interface and provide -- interconnection with various remote destinations. -- Each such virtual circuit is represented by an entry in the -- circuit table. -- Circuit Table Extensions -- The table describing the use of the PVCs attached to -- each Frame Relay Interface. usrfrExtCircuitTable OBJECT-TYPE SYNTAX SEQUENCE OF UsrFrExtCircuitEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing information about specific virtual circuits." ::= { usrFRExt 5 } usrfrExtCircuitEntry OBJECT-TYPE SYNTAX UsrFrExtCircuitEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The information regarding a single Data Link Connection Identifier." INDEX { usrfrExtCircuitIfIndex, usrfrExtCircuitDlci } ::= { usrfrExtCircuitTable 1 } UsrFrExtCircuitEntry ::= SEQUENCE { usrfrExtCircuitIfIndex Index, usrfrExtCircuitDlci DLCI, usrfrExtCircuitOperStatus INTEGER, usrfrExtCircuitCIR INTEGER, usrfrExtCircuitBcMax INTEGER, usrfrExtCircuitBcMin INTEGER, usrfrExtCircuitCurrentBc INTEGER, usrfrExtCircuitTc INTEGER, usrfrExtCircuitBECNMonitoring INTEGER, usrfrExtCircuitCMP INTEGER, usrfrExtCircuitTxFramesCongested Counter32, usrfrExtCircuitTxOctetsCongested Counter32, usrfrExtCircuitTxFramesDiscarded Counter32, usrfrExtCircuitTxOctetsDiscarded Counter32, usrfrExtCircuitTxFramesFromForwarder Counter32, usrfrExtCircuitTxOctetsFromForwarder Counter32, usrfrExtCircuitRxFramesCongested Counter32, usrfrExtCircuitRxOctetsCongested Counter32, usrfrExtCircuitRxOctetsDiscarded Counter32, usrfrExtCircuitRxFramesByForwarder Counter32, usrfrExtCircuitRxOctetsByForwarder Counter32, usrfrExtCircuitTxIPProtocolFrames Counter32, usrfrExtCircuitRxIPProtocolFrames Counter32, usrfrExtCircuitTxIPXProtocolFrames Counter32, usrfrExtCircuitRxIPXProtocolFrames Counter32, usrfrExtCircuitTxATProtocolFrames Counter32, usrfrExtCircuitRxATProtocolFrames Counter32, usrfrExtCircuitTxBridgedFrames Counter32, usrfrExtCircuitRxBridgedFrames Counter32, usrfrExtCircuitPVCName DisplayString, usrfrExtCircuitTrace INTEGER, usrfrExtCircuitBECNRatio INTEGER, usrfrExtCircuitTxL2TPProtocolFrames Counter32, usrfrExtCircuitRxL2TPProtocolFrames Counter32, usrfrExtCircuitPTMPGroupState TruthValue, usrfrExtCircuitPTMPGroupName DisplayString } usrfrExtCircuitIfIndex OBJECT-TYPE SYNTAX Index MAX-ACCESS read-only STATUS current DESCRIPTION "The ifIndex value of the ifEntry this virtual circuit is layered onto." ::= { usrfrExtCircuitEntry 1 } usrfrExtCircuitDlci OBJECT-TYPE SYNTAX DLCI MAX-ACCESS read-only STATUS current DESCRIPTION "The Data Link Connection Identifier for this virtual circuit." REFERENCE "Draft American National Standard T1.618-1991, Section 3.3.6" ::= { usrfrExtCircuitEntry 2 } usrfrExtCircuitOperStatus OBJECT-TYPE SYNTAX INTEGER { up (1), -- ready to pass packets down (2), disabled (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational state of the FR PVC. The disabled(3) state indicates that no operational packets can be passed through this PVC. It reflects the fact that CircuitAdminStatus is disabled. The up(1) describes a state when packets can be sent and received on the PVC. The down(2) indicates that PVC is not able to operate. The up(1) and down(2) states are set up based on LMI PVCS IE." ::= { usrfrExtCircuitEntry 3 } usrfrExtCircuitCIR OBJECT-TYPE SYNTAX INTEGER { on (1), off (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Committed Information Rate (CIR) describes how congestion control is handled. Off indicates that no attempt at transmit control is made. On indicates that Frame Relay is monitoring amount of data transmitted through the physical interface and restricts this according to CIR rules." DEFVAL { 1 } --CONFIGURABLE ::= { usrfrExtCircuitEntry 4 } usrfrExtCircuitBcMax OBJECT-TYPE SYNTAX INTEGER (0..8192000) MAX-ACCESS read-write STATUS current DESCRIPTION "The Committed Burst Size is the maximum amount of data (in bits) that the user may offer to the network, under normal conditions, during a time interval Tc. The BcMax value defines the upper boundary of current Bc value." REFERENCE "CCITT Recommendation I.370, Section 1.2 Bc" DEFVAL { 256000 } --CONFIGURABLE ::= { usrfrExtCircuitEntry 5 } usrfrExtCircuitBcMin OBJECT-TYPE SYNTAX INTEGER (0..8192000) MAX-ACCESS read-write STATUS current DESCRIPTION "The Committed Burst Size is the maximum amount of data (in bits) that the user may offer to the network, under normal conditions, during a time interval Tc. The BcMin value defines the lower boundary of current Bc value." REFERENCE "CCITT Recommendation I.370, Section 1.2 Bc" DEFVAL { 128000 } --CONFIGURABLE ::= { usrfrExtCircuitEntry 6 } usrfrExtCircuitCurrentBc OBJECT-TYPE SYNTAX INTEGER (0..8192000) MAX-ACCESS read-only STATUS current DESCRIPTION "The Committed Burst Size is the maximum amount of data (in bits) that the user may offer to the network, under normal conditions, during a time interval Tc. The CurrentBc value represents currently used Bc value." REFERENCE "CCITT Recommendation I.370, Section 1.2 Bc" ::= { usrfrExtCircuitEntry 7 } usrfrExtCircuitTc OBJECT-TYPE SYNTAX INTEGER (0..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The Committed Rate Measurement Interval is a time interval during which the user is allowed to send only the committed amount of date (Bc) and the excess amount of data (Be). This value is calculated and is expressed in milliseconds." REFERENCE "CCITT Recommendation I.370, Section 1.2 Tc" ::= { usrfrExtCircuitEntry 8 } usrfrExtCircuitBECNMonitoring OBJECT-TYPE SYNTAX INTEGER { on (1), off (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "BECN Monitoring describes if BECN congestion notification control is handled. Off indicates that no attempt at congestion notification control is made. On indicates that the BECN bit of the Q.922 header is monitored. When the BECN bit indicates that the Frame Relay switch is experiencing congestion over this DLCI, the transmission rate will be slowed, to value calculated based on usrfrCircuitBcMin. When the bit indicates alleviation of congestion, the transmission rate will be incrementally increased back to a value calculated based on usrfrCircuitBcMax." DEFVAL { 2 } --CONFIGURABLE ::= { usrfrExtCircuitEntry 9 } usrfrExtCircuitCMP OBJECT-TYPE SYNTAX INTEGER (1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "The Congestion Monitoring Period - is a period expressed in seconds, during which Frame Relay monitors number of received BECN events." DEFVAL { 10 } --CONFIGURABLE ::= { usrfrExtCircuitEntry 10 } -- -- Circuit Statistics -- usrfrExtCircuitTxFramesCongested OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of frames congested by a physical driver during transmit action taken by this PVC since it was created." ::= { usrfrExtCircuitEntry 11 } usrfrExtCircuitTxOctetsCongested OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bytes congested by a physical driver during transmit action taken by this PVC since it was created." ::= { usrfrExtCircuitEntry 12 } usrfrExtCircuitTxFramesDiscarded OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of frames discarded during transmit action by this PVC since it was created." ::= { usrfrExtCircuitEntry 13 } usrfrExtCircuitTxOctetsDiscarded OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bytes discarded during transmit action by this PVC since it was created." ::= { usrfrExtCircuitEntry 14 } usrfrExtCircuitTxFramesFromForwarder OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of frames handed down from forwarder to this PVC since it was created." ::= { usrfrExtCircuitEntry 15 } usrfrExtCircuitTxOctetsFromForwarder OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bytes handed down from forwarder to this PVC since it was created." ::= { usrfrExtCircuitEntry 16 } usrfrExtCircuitRxFramesCongested OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of frames congested by a forwarder during receive action taken by this PVC since it was created." ::= { usrfrExtCircuitEntry 17 } usrfrExtCircuitRxOctetsCongested OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bytes congested by a forwarder during receive action taken by this PVC since it was created." ::= { usrfrExtCircuitEntry 18 } usrfrExtCircuitRxOctetsDiscarded OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bytes discarded during receive action by this PVC since it was created." ::= { usrfrExtCircuitEntry 19 } usrfrExtCircuitRxFramesByForwarder OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of frames passed to forwarder by this PVC since it was created." ::= { usrfrExtCircuitEntry 20 } usrfrExtCircuitRxOctetsByForwarder OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bytes passed to forwarder by this PVC since it was created." ::= { usrfrExtCircuitEntry 21 } usrfrExtCircuitTxIPProtocolFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of IP protocol frames sent by this PVC since it was created." ::= { usrfrExtCircuitEntry 22 } usrfrExtCircuitRxIPProtocolFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of IP protocol frames received by this PVC since it was created." ::= { usrfrExtCircuitEntry 23 } usrfrExtCircuitTxIPXProtocolFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of IPX protocol frames sent by this PVC since it was created." ::= { usrfrExtCircuitEntry 24 } usrfrExtCircuitRxIPXProtocolFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of IPX protocol frames received by this PVC since it was created." ::= { usrfrExtCircuitEntry 25 } usrfrExtCircuitTxATProtocolFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of AppleTalk protocol frames sent by this PVC since it was created." ::= { usrfrExtCircuitEntry 26 } usrfrExtCircuitRxATProtocolFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of AppleTalk protocol frames received by this PVC since it was created." ::= { usrfrExtCircuitEntry 27 } usrfrExtCircuitTxBridgedFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Bridged frames sent by this PVC since it was created." ::= { usrfrExtCircuitEntry 28 } usrfrExtCircuitRxBridgedFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Bridged frames received by this PVC since it was created." ::= { usrfrExtCircuitEntry 29 } usrfrExtCircuitPVCName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of this PVC. This table allows the Pilgrim CLI process to translate PVC name into IfIndex/DLCI pair." --CONFIGURABLE ::= { usrfrExtCircuitEntry 30 } usrfrExtCircuitTrace OBJECT-TYPE SYNTAX INTEGER { on (1), off (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This indicates if the Frame Relay data frames trace information will be displayed on the console for this PVC." DEFVAL { 2 } --CONFIGURABLE ::= { usrfrExtCircuitEntry 31 } usrfrExtCircuitBECNRatio OBJECT-TYPE SYNTAX INTEGER (1..99) MAX-ACCESS read-write STATUS current DESCRIPTION "BECN/(BECN + NO_BECN) percentage ratio used by BECN Monitoring mechanism to make a BC adjustment decision for this PVC. It is expressed in percents." DEFVAL { 50 } --CONFIGURABLE ::= { usrfrExtCircuitEntry 32 } usrfrExtCircuitTxL2TPProtocolFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of L2TP Protocol frames sent by this PVC since it was created." ::= { usrfrExtCircuitEntry 33 } usrfrExtCircuitRxL2TPProtocolFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of L2TP Protocol frames received by this PVC since it was created." ::= { usrfrExtCircuitEntry 34 } usrfrExtCircuitPTMPGroupState OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Determines whether this PVC is attached to a PTMP Group or not" ::= { usrfrExtCircuitEntry 35 } usrfrExtCircuitPTMPGroupName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Name of the Point-to-Multipoint group this PVC is assiciated with" ::= { usrfrExtCircuitEntry 36 } -- -- Frame Relay DLL Error Table Extensions -- -- The table describing errors encountered on each Frame -- Relay Interface. usrfrExtErrTable OBJECT-TYPE SYNTAX SEQUENCE OF UsrFrExtErrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing information about Errors on the Frame Relay interface." ::= { usrFRExt 6 } usrfrExtErrEntry OBJECT-TYPE SYNTAX UsrFrExtErrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The error information for a single Frame Relay interface." INDEX { usrfrExtErrIfIndex } ::= { usrfrExtErrTable 1 } UsrFrExtErrEntry ::= SEQUENCE { usrfrExtErrIfIndex Index, usrfrExtErrUnknownError Counter32, usrfrExtErrReceivedShortFrames Counter32, usrfrExtErrReceivedLongFrames Counter32, usrfrExtErrIllegalDlcis Counter32, usrfrExtErrUnknownDlcis Counter32, usrfrExtErrDlmciProtocolErrs Counter32, usrfrExtStatDLLRxFrames Counter32, usrfrExtStatDLLRxOctets Counter32, usrfrExtStatDLLTxFrames Counter32, usrfrExtStatDLLTxOctets Counter32, usrfrExtStatLMIRxFrames Counter32, usrfrExtStatLMITxFrames Counter32, usrfrExtStatLMIRxStatusEnquiry Counter32, usrfrExtStatLMITxStatusEnquiry Counter32, usrfrExtStatLMIRxStatus Counter32, usrfrExtStatLMITxStatus Counter32, usrfrExtStatLMIRxStatusUpdate Counter32, usrfrExtErrLMINoNetworkResponse Counter32, usrfrExtErrLMIInvQ922 Counter32, usrfrExtErrLMIInvControlField Counter32, usrfrExtErrLMIInvProtocolDiscr Counter32, usrfrExtErrLMIInvCallReference Counter32, usrfrExtErrLMIInvMessageType Counter32, usrfrExtErrLMIInvLockingShift Counter32, usrfrExtErrLMIInvReportType Counter32, usrfrExtErrLMIInvLIV Counter32, usrfrExtErrLMIInvSeqNum Counter32, usrfrExtErrLMIInvPVCStatus Counter32, usrfrExtErrLMIUnsolicitedMessage Counter32, usrfrExtErrLMIUnrecognizedIE Counter32, usrfrExtErrLMIIncompleteMessage Counter32, usrfrExtErrLMIOutOfOrderIE Counter32, usrfrExtErrLMIInvSpareBits Counter32, usrfrExtErrLMIInvExtensionBit Counter32, usrfrExtErrLMIInvNADBits Counter32, usrfrExtStatLMIRxAsyncStatus Counter32 } usrfrExtErrIfIndex OBJECT-TYPE SYNTAX Index MAX-ACCESS read-only STATUS current DESCRIPTION "The ifIndex Value of the ifEntry this virtual circuit is layered onto." ::= { usrfrExtErrEntry 1 } usrfrExtErrUnknownError OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "An error which is not specified by another counter." ::= { usrfrExtErrEntry 2 } usrfrExtErrReceivedShortFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of frames discarded because they were too short." ::= { usrfrExtErrEntry 3 } usrfrExtErrReceivedLongFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of frames discarded because they were too long." ::= { usrfrExtErrEntry 4 } usrfrExtErrIllegalDlcis OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of frames discarded because they contained illegal DLCIs." ::= { usrfrExtErrEntry 5 } usrfrExtErrUnknownDlcis OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of frames discarded because they contained unknown DLCIs." ::= { usrfrExtErrEntry 6 } usrfrExtErrDlmciProtocolErrs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Frame Relay protocol errors." ::= { usrfrExtErrEntry 7 } usrfrExtStatDLLRxFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Frame Relay frames received on this DLL." ::= { usrfrExtErrEntry 8 } usrfrExtStatDLLRxOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of bytes received on this DLL." ::= { usrfrExtErrEntry 9 } usrfrExtStatDLLTxFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Frame Relay frames transmitted on this DLL." ::= { usrfrExtErrEntry 10 } usrfrExtStatDLLTxOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets transmitted on this DLL." ::= { usrfrExtErrEntry 11 } usrfrExtStatLMIRxFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Frame Relay LMI frames received on this DLL." ::= { usrfrExtErrEntry 12 } usrfrExtStatLMITxFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Frame Relay LMI frames transmitted on this DLL." ::= { usrfrExtErrEntry 13 } usrfrExtStatLMIRxStatusEnquiry OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Frame Relay LMI Status Enquiry frames receiveded on this DLL." ::= { usrfrExtErrEntry 14 } usrfrExtStatLMITxStatusEnquiry OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Frame Relay LMI Status Enquiry frames transmitted on this DLL." ::= { usrfrExtErrEntry 15 } usrfrExtStatLMIRxStatus OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Frame Relay LMI Status frames received on this DLL." ::= { usrfrExtErrEntry 16 } usrfrExtStatLMITxStatus OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Frame Relay LMI Status frames transmitted on this DLL." ::= { usrfrExtErrEntry 17 } usrfrExtStatLMIRxStatusUpdate OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Frame Relay LMI Status Update frames received on this DLL." ::= { usrfrExtErrEntry 18 } usrfrExtErrLMINoNetworkResponse OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of lacks of Network responses to LMI Status Enquiry frames sent on this DLL." ::= { usrfrExtErrEntry 19 } usrfrExtErrLMIInvQ922 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of LMI frames with invalid Q922 header received on this DLL." ::= { usrfrExtErrEntry 20 } usrfrExtErrLMIInvControlField OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of LMI frames with invalid Control Field received on this DLL." ::= { usrfrExtErrEntry 21 } usrfrExtErrLMIInvProtocolDiscr OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of LMI frames with invalid Protocol Discriominator field received on this DLL." ::= { usrfrExtErrEntry 22 } usrfrExtErrLMIInvCallReference OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of LMI frames with invalid Call Reference field received on this DLL." ::= { usrfrExtErrEntry 23 } usrfrExtErrLMIInvMessageType OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of LMI frames with invalid Message Type field received on this DLL." ::= { usrfrExtErrEntry 24 } usrfrExtErrLMIInvLockingShift OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of LMI frames with invalid Locking Shift IE received on this DLL." ::= { usrfrExtErrEntry 25 } usrfrExtErrLMIInvReportType OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of LMI frames with invalid Report Type IE received on this DLL." ::= { usrfrExtErrEntry 26 } usrfrExtErrLMIInvLIV OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of LMI frames with invalid Link Integrity Verification IE received on this DLL." ::= { usrfrExtErrEntry 27 } usrfrExtErrLMIInvSeqNum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of LMI frames with invalid Sequence Number field received on this DLL." ::= { usrfrExtErrEntry 28 } usrfrExtErrLMIInvPVCStatus OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of LMI frames with invalid PVC Status IE received on this DLL." ::= { usrfrExtErrEntry 29 } usrfrExtErrLMIUnsolicitedMessage OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of unsolicited LMI frames received on this DLL." ::= { usrfrExtErrEntry 30 } usrfrExtErrLMIUnrecognizedIE OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of LMI frames with unrecognized IE received on this DLL." ::= { usrfrExtErrEntry 31 } usrfrExtErrLMIIncompleteMessage OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of LMI frames with incomplete current IE received on this DLL." ::= { usrfrExtErrEntry 32 } usrfrExtErrLMIOutOfOrderIE OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of LMI frames with out_of_order IE received on this DLL." ::= { usrfrExtErrEntry 33 } usrfrExtErrLMIInvSpareBits OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of LMI frames with invalid Spare Bits values in IE received on this DLL." ::= { usrfrExtErrEntry 34 } usrfrExtErrLMIInvExtensionBit OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of LMI frames with invalid Extension Bit value in IE received on this DLL." ::= { usrfrExtErrEntry 35 } usrfrExtErrLMIInvNADBits OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of LMI frames with invalid New, Active or Delete bits in PVCS IE received on this DLL." ::= { usrfrExtErrEntry 36 } usrfrExtStatLMIRxAsyncStatus OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of LMI Async Status frames received on this DLL." ::= { usrfrExtErrEntry 37 } -- -- Frame Relay Trap Extensions -- usrfrExtTraps OBJECT IDENTIFIER ::= { usrFRExt 7} usrfrExtDLCMIStatusChange NOTIFICATION-TYPE OBJECTS { usrfrExtDlcmiOperStatus } STATUS current DESCRIPTION " This trap indicates that the indicated Data Link Layer has changed state. It has either been created or invalidated, or has toggled between the active and inactive states. " --#TYPE "Warning" --#SUMMARY "Data Link Layer has changed state (%d)" --#ARGUMENTS { 0 } --#SEVERITY MAJOR --#STATE OPERATIONAL --#PROBABLECAUSE "State Change" ::= { usrfrExtTraps 1 } -- -- Frame Relay PTMP PVC Group Definition -- The Point-to-Multipoint PVC Group is a logical -- interface between Layer 3 protocol forwarders -- and a Group of PTP PVCs participating in this -- Group. -- usrfrExtPTMPGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF UsrFrExtPTMPGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing information about PTMP PVC Group specific" ::= { usrFRExt 8 } usrfrExtPTMPGroupEntry OBJECT-TYPE SYNTAX UsrFrExtPTMPGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The information regarding a single PTMP PVC Group entry." INDEX { usrfrExtPTMPGroupName } ::= { usrfrExtPTMPGroupTable 1 } UsrFrExtPTMPGroupEntry ::= SEQUENCE { usrfrExtPTMPGroupName DisplayString, usrfrExtPTMPGroupIndex Index, usrfrExtPTMPGroupOperStatus INTEGER, usrfrExtPTMPNumberOfPVCs Counter32, usrfrExtPTMPTxUcastFrames Counter32, usrfrExtPTMPTxUcastOctets Counter32, usrfrExtPTMPTxMcastFrames Counter32, usrfrExtPTMPTxMcastOctets Counter32, usrfrExtPTMPTxDiscardedFrames Counter32, usrfrExtPTMPTxDiscardedOctets Counter32, usrfrExtPTMPRxFrames Counter32, usrfrExtPTMPRxOctets Counter32, usrfrExtPTMPRxCongestedFrames Counter32, usrfrExtPTMPRxCongestedOctets Counter32, usrfrExtPTMPRxDiscardedFrames Counter32, usrfrExtPTMPRxDiscardedOctets Counter32, usrfrExtPTMPTxIPProtocolFrames Counter32, usrfrExtPTMPRxIPProtocolFrames Counter32, usrfrExtPTMPTxIPXProtocolFrames Counter32, usrfrExtPTMPRxIPXProtocolFrames Counter32, usrfrExtPTMPTxATProtocolFrames Counter32, usrfrExtPTMPRxATProtocolFrames Counter32, usrfrExtPTMPTxBridgedFrames Counter32, usrfrExtPTMPRxBridgedFrames Counter32, usrfrExtPTMPTxL2TPProtocolFrames Counter32, usrfrExtPTMPRxL2TPProtocolFrames Counter32, usrfrExtPTMPCreationTime TimeStamp, usrfrExtPTMPLastTimeChange TimeStamp, usrfrExtPTMPRowStatus RowStatus, usrfrExtPTMPTrace INTEGER } usrfrExtPTMPGroupName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the PTMP PVC Group. It is a unique name used as a index to PTMP PVC Group Table." ::= { usrfrExtPTMPGroupEntry 1 } usrfrExtPTMPGroupIndex OBJECT-TYPE SYNTAX Index MAX-ACCESS read-only STATUS current DESCRIPTION "Logical Index used by a PVC as a reference to a PTMP PVC Group. This index is a unique number." --CONFIGURABLE ::= { usrfrExtPTMPGroupEntry 2 } usrfrExtPTMPGroupOperStatus OBJECT-TYPE SYNTAX INTEGER { up (1), -- ready to pass packets down (2), disabled (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational state of the PTMP PVC Group. The disabled(3) state indicates that no data packets can be passed through this PTMP PVC Group. It reflects the fact that RowStatus is set to notInService. The up(1) describes a state when packets can be sent and received on the PTMP PVC Group. The down(2) indicates that PTMP PVC Group is not able to operate. The up(1) and down(2) states are set up based on status of all PVC participating in this Group. " ::= { usrfrExtPTMPGroupEntry 3 } usrfrExtPTMPNumberOfPVCs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of PVCs associated with this PTMP PVC Group." ::= { usrfrExtPTMPGroupEntry 4 } usrfrExtPTMPTxUcastFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of unicast frames sent by a forwarder to this PTMP PVC Group, since it was enabled." ::= { usrfrExtPTMPGroupEntry 5 } usrfrExtPTMPTxUcastOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets in unicast frames sent by a forwarder to this PTMP PVC Group, since it was enabled." ::= { usrfrExtPTMPGroupEntry 6 } usrfrExtPTMPTxMcastFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of multicast frames sent by a forwarder to this PTMP PVC Group, since it was enabled." ::= { usrfrExtPTMPGroupEntry 7 } usrfrExtPTMPTxMcastOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets in multicast frames sent by a forwarder to this PTMP PVC Group, since it was enabled." ::= { usrfrExtPTMPGroupEntry 8 } usrfrExtPTMPTxDiscardedFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of frames discarded, which were sent by forwarder to this PTMP PVC Group, since it was enabled." ::= { usrfrExtPTMPGroupEntry 9 } usrfrExtPTMPTxDiscardedOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets in a discarded frames sent by a forwarder to this PTMP PVC Group, since it was enabled." ::= { usrfrExtPTMPGroupEntry 10 } usrfrExtPTMPRxFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of frames received from all associated PVCS by this PTMP PVC Group, since it was enabled." ::= { usrfrExtPTMPGroupEntry 11 } usrfrExtPTMPRxOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets received from all associated PVCS by this PTMP PVC Group, since it was enabled." ::= { usrfrExtPTMPGroupEntry 12 } usrfrExtPTMPRxCongestedFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of frames received from all associated PVCS, which were congested by the forwarder on attempt of passing them by PTMP PVC Group, since the group was enabled." ::= { usrfrExtPTMPGroupEntry 13 } usrfrExtPTMPRxCongestedOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets in frames received from all associated PVCS, which were congested by the forwarder on attempt of passing them by PTMP PVC Group, since the group was enabled." ::= { usrfrExtPTMPGroupEntry 14 } usrfrExtPTMPRxDiscardedFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of received frames from all associated PVCs which were discarded by this PTMP PVC Group, since it was enabled." ::= { usrfrExtPTMPGroupEntry 15 } usrfrExtPTMPRxDiscardedOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets in a received frames from all associated PVCs which were discarded by this PTMP PVC Group, since it was enabled." ::= { usrfrExtPTMPGroupEntry 16 } usrfrExtPTMPTxIPProtocolFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of IP protocol frames sent by this PTMP PVC Group since it was enabled." ::= { usrfrExtPTMPGroupEntry 17 } usrfrExtPTMPRxIPProtocolFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of IP protocol frames received by this PTMP PVC Group since it was enabled." ::= { usrfrExtPTMPGroupEntry 18 } usrfrExtPTMPTxIPXProtocolFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of IPX protocol frames sent by this PTMP PVC Group since it was enabled." ::= { usrfrExtPTMPGroupEntry 19 } usrfrExtPTMPRxIPXProtocolFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of IPX protocol frames received by this PTMP PVC Group since it was enabled." ::= { usrfrExtPTMPGroupEntry 20 } usrfrExtPTMPTxATProtocolFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of AppleTalk protocol frames sent by this PTMP PVC Group since it was enabled." ::= { usrfrExtPTMPGroupEntry 21 } usrfrExtPTMPRxATProtocolFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of AppleTalk protocol frames received by this PTMP PVC Group since it was enabled." ::= { usrfrExtPTMPGroupEntry 22 } usrfrExtPTMPTxBridgedFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Bridged frames sent by this PTMP PVC Group since it was enabled." ::= { usrfrExtPTMPGroupEntry 23 } usrfrExtPTMPRxBridgedFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of Bridged frames received by this PTMP PVC Group since it was enabled." ::= { usrfrExtPTMPGroupEntry 24 } usrfrExtPTMPTxL2TPProtocolFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of L2TP Protocol frames sent by this PTMP PVC Group since it was enabled." ::= { usrfrExtPTMPGroupEntry 25 } usrfrExtPTMPRxL2TPProtocolFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of L2TP Protocol frames received by this PTMP PVC Group since it was enabled." ::= { usrfrExtPTMPGroupEntry 26 } usrfrExtPTMPCreationTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when this PTMP PVC Group was created." ::= { usrfrExtPTMPGroupEntry 27 } usrfrExtPTMPLastTimeChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when last there was a change in this PTMP PVC Group state." ::= { usrfrExtPTMPGroupEntry 28 } usrfrExtPTMPRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to create a new row or destroy or modify an existing row in a manner described in the definition of the RowStatus textual convention." --CONFIGURABLE ::= { usrfrExtPTMPGroupEntry 29 } usrfrExtPTMPTrace OBJECT-TYPE SYNTAX INTEGER { on (1), off (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This indicates if the Frame Relay data frames trace information will be displayed on the console for this PTMP PVC Group." DEFVAL { 2 } --CONFIGURABLE ::= { usrfrExtPTMPGroupEntry 30 } usrfrExtPTMPGroupStatusChange NOTIFICATION-TYPE OBJECTS { usrfrExtPTMPGroupOperStatus } STATUS current DESCRIPTION " This trap indicates that the indicated PTMP PVC Group has changed its state. It has either been created or invalidated, or has toggled between the active and inactive states. " --#TYPE "Warning" --#SUMMARY "PTMP PVC Group has changed state (%d)" --#ARGUMENTS { 0 } --#SEVERITY MAJOR --#STATE OPERATIONAL --#PROBABLECAUSE "State Change" ::= { usrfrExtTraps 2 } END -- End of USR-FR-EXT-MIB DEFINITIONS -- ********************************************************************** -- usr_dhcp.mib -- -- -- Author: Fritz Reeve --