All MIBs › USR-ATM-CROSS-CONNECT-MIB
Organization: CommWorks Corporation, a 3Com Company
Last Updated: 2002-04-06
Category: CommWorks/3Com Access Equipment
Description: Manages ATM cross-connect switching tables and VPI/VCI assignment on CommWorks/3Com equipment.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is USR-ATM-CROSS-CONNECT-MIB?
USR-ATM-CROSS-CONNECT-MIB is a CommWorks (US Robotics/3Com) enterprise MIB for managing ATM cross-connect switching on their carrier-class access equipment, controlling how virtual circuits are switched between ATM ports using VPI/VCI values. It exposes configuration data describing cross-connect table entries that map an incoming VPI/VCI on one port to an outgoing VPI/VCI on another. Its monitoring role is configuration/software-state oriented: confirming that cross-connect mappings are correctly provisioned and active, which helps diagnose a broken end-to-end ATM circuit caused by a missing or incorrect cross-connect entry rather than a physical link fault. It is closely tied to standard ATM PVC/VCC concepts (ATM Forum and related IETF ATM MIBs) even though it is a vendor-specific extension for CommWorks hardware. It is deployed on CommWorks/3Com ATM switching platforms used by carriers for ATM-based access and aggregation networks. Engineers can download the USR-ATM-CROSS-CONNECT-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in USR-ATM-CROSS-CONNECT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- CommWorks/3Com ATM switching/access equipment
Monitoring Examples
No sample object names were supplied for this module in the input data; based on its description, one would expect a cross-connect table keyed by port/VPI/VCI pairs describing the switched path between ATM interfaces. An administrator would poll such a table to verify a specific cross-connect entry exists and is active, explaining an end-to-end ATM circuit outage if the entry is missing, misconfigured, or in a down state.
Imported Objects
From ATM-MIB
| IfIndex |
From RFC1213-MIB
| DisplayString |
From SNMPv2-SMI
| Integer32 | |
| MODULE-IDENTITY | |
| OBJECT-TYPE |
From SNMPv2-TC
| RowStatus |
From USR-DEFINITIONS-MIB
| common | OBJECT-IDENTITY |
OIDs
RFC description
USRobotics ATM cross-connect management MIB defining objects for configuring and monitoring ATM virtual circuit cross-connections on USR equipment (vendor product-specific).
Start monitoring CommWorks/3Com ATM switching/access equipment (VPI/VCI cross-connect mapping status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.