UMSLMSENSOR-MIB

All MIBs › UMSLMSENSOR-MIB

Category: Network Management and SNMP Infrastructure

Description: Monitors UMS sensor readings for physical environment parameters including temperature and power.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is UMSLMSENSOR-MIB?

UMSLMSENSOR-MIB is a vendor sensor MIB, associated with IBM-style "iBMPSG" environmental sensor naming conventions, that monitors physical environment parameters, chiefly temperature, for a device's Universal Management/Sensor subsystem. It exposes a temperature sensor table giving each sensor's current reading alongside its nominal reading and normal operating range (min/max), as well as absolute readable limits and measurement resolution/tolerance. This is a clear hardware-environmental monitoring MIB: administrators use it to track temperature-sensor readings against defined normal thresholds, detecting overheating or sensor-fault conditions before they cause a hardware shutdown or damage. It parallels the structure of standard hardware-sensor conventions (similar in spirit to the ENTITY-SENSOR-MIB) though implemented as a vendor-specific extension rather than the IETF standard itself. It is typically deployed within blade servers, chassis, or embedded system controllers where internal temperature must be tracked for thermal management. Engineers can download the UMSLMSENSOR-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in UMSLMSENSOR-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

blade server / chassis with embedded temperature sensors

Monitoring Examples

An administrator would poll iBMPSGTemperatureSensorTable/iBMPSGTemperatureSensorEntry, keyed by iBMPSGTemperatureSensorKeyIndex, to compare iBMPSGTemperatureSensorCurrentReading against iBMPSGTemperatureSensorNormalMax and iBMPSGTemperatureSensorNormalMin. A current reading that exceeds iBMPSGTemperatureSensorNormalMax (or approaches iBMPSGTemperatureSensorMaxReadable) would indicate the component is overheating, while comparing against iBMPSGTemperatureSensorNominalReading and iBMPSGTemperatureSensorTolerance would help distinguish a real thermal event from normal sensor variance.

What Can Be Monitored

current temperature reading
nominal temperature reading
normal operating min/max range
max/min readable limits
sensor resolution and tolerance

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From UMS-MIB

Boolean
Datetime
Real32
Real64
Sint16
Sint32
Sint64
Sint8
String
Uint16
Uint32
Uint64
Uint8
ibmpsgLMSensor	OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
BOO iBMPSGFanActiveCooling	1.3.6.1.4.1.2.6.159.1.1.80.3.1.4	Boolean	read-write
STR iBMPSGFanDesiredSpeed	1.3.6.1.4.1.2.6.159.1.1.80.3.1.3	String	read-write
iBMPSGFanEntry	1.3.6.1.4.1.2.6.159.1.1.80.3.1		not-accessible
BOO iBMPSGFanEventAutoClearEnabled	1.3.6.1.4.1.2.6.159.1.1.80.3.1.8	Boolean	read-write	False means that events are only generated on state changes. True means that events are generated on state changes and periodically when the object is in a non-normal state.
BOO iBMPSGFanEventsEnabled	1.3.6.1.4.1.2.6.159.1.1.80.3.1.6	Boolean	read-write	Event generation status.
NUM iBMPSGFanFanType	1.3.6.1.4.1.2.6.159.1.1.80.3.1.5	Uint32	read-write	The current fan type
STR iBMPSGFanKeyIndex	1.3.6.1.4.1.2.6.159.1.1.80.3.1.1	String	read-write
NUM iBMPSGFanPollingInterval	1.3.6.1.4.1.2.6.159.1.1.80.3.1.7	Uint32	read-write	Polling interval is measured in seconds. Value of zero indicates do it once and quit. Minimum polling interval is ten seconds.
STR iBMPSGFanStatus	1.3.6.1.4.1.2.6.159.1.1.80.3.1.9	String	read-write	The Status property is a string indicating the current status of the object. Various operational and non-operational statuses can be defined. Operational statuses are OK, Degraded and Pred Fail. Pred Fail indicates that an element may be functioning properly but predicting a failure in the near future. An example is a SMART-enabled hard drive. Non-operational statuses can also be specified. These are Error, Starting, Stopping and Service. The latter, Service, could apply during mirror-resilvering of a disk, reload of a user permissions list, or other administrative work. Not all such work is on-line, yet the managed element is neither OK nor in one of the other states.
iBMPSGFanTable	1.3.6.1.4.1.2.6.159.1.1.80.3		not-accessible	The IBMPSG_Fan class represents an IBM managed fan sensor
BOO iBMPSGFanVariableSpeed	1.3.6.1.4.1.2.6.159.1.1.80.3.1.2	Boolean	read-write
NUM iBMPSGSystemEnclosureACLineStatus	1.3.6.1.4.1.2.6.159.1.1.80.4.1.7	Uint16	read-write	This group defines status information about the AC line in the notebook
NUM iBMPSGSystemEnclosureDockingStatus	1.3.6.1.4.1.2.6.159.1.1.80.4.1.6	Uint16	read-write	This defines whether system is docked or not
iBMPSGSystemEnclosureEntry	1.3.6.1.4.1.2.6.159.1.1.80.4.1		not-accessible
BOO iBMPSGSystemEnclosureEventAutoClearEnabled	1.3.6.1.4.1.2.6.159.1.1.80.4.1.8	Boolean	read-write	False means that events are only generated on state changes. True means that events are generated on state changes and periodically when the object is in a non-normal state.
BOO iBMPSGSystemEnclosureEventsEnabled	1.3.6.1.4.1.2.6.159.1.1.80.4.1.4	Boolean	read-write	Event generation status.
NUM iBMPSGSystemEnclosureIntrusionStatus	1.3.6.1.4.1.2.6.159.1.1.80.4.1.2	Uint32	read-write	The intrusion status
NUM iBMPSGSystemEnclosureIntrusionType	1.3.6.1.4.1.2.6.159.1.1.80.4.1.3	Uint32	read-write	The intrusion status
STR iBMPSGSystemEnclosureKeyIndex	1.3.6.1.4.1.2.6.159.1.1.80.4.1.1	String	read-write
NUM iBMPSGSystemEnclosurePollingInterval	1.3.6.1.4.1.2.6.159.1.1.80.4.1.5	Uint32	read-write	Polling interval is measured in seconds. Value of zero indicates do it once and quit. Minimum polling interval is ten seconds.
STR iBMPSGSystemEnclosureStatus	1.3.6.1.4.1.2.6.159.1.1.80.4.1.9	String	read-write	The Status property is a string indicating the current status of the object. Various operational and non-operational statuses can be defined. Operational statuses are OK, Degraded and Pred Fail. Pred Fail indicates that an element may be functioning properly but predicting a failure in the near future. An example is a SMART-enabled hard drive. Non-operational statuses can also be specified. These are Error, Starting, Stopping and Service. The latter, Service, could apply during mirror-resilvering of a disk, reload of a user permissions list, or other administrative work. Not all such work is on-line, yet the managed element is neither OK nor in one of the other states.
iBMPSGSystemEnclosureTable	1.3.6.1.4.1.2.6.159.1.1.80.4		not-accessible	The IBMPSG_SystemEnclosure class represents an IBM chassis sensor
NUM iBMPSGTachometerCurrentReading	1.3.6.1.4.1.2.6.159.1.1.80.5.1.2	Sint32	read-write
iBMPSGTachometerEntry	1.3.6.1.4.1.2.6.159.1.1.80.5.1		not-accessible
BOO iBMPSGTachometerEventAutoClearEnabled	1.3.6.1.4.1.2.6.159.1.1.80.5.1.19	Boolean	read-write	False means that events are only generated on state changes. True means that events are generated on state changes and periodically when the object is in a non-normal state.
BOO iBMPSGTachometerEventsEnabled	1.3.6.1.4.1.2.6.159.1.1.80.5.1.18	Boolean	read-write	Event generation status.
NUM iBMPSGTachometerFanDescrip	1.3.6.1.4.1.2.6.159.1.1.80.5.1.16	Uint32	read-write	The Fan Description
NUM iBMPSGTachometerFanType	1.3.6.1.4.1.2.6.159.1.1.80.5.1.17	Uint32	read-write	The current fan type
STR iBMPSGTachometerKeyIndex	1.3.6.1.4.1.2.6.159.1.1.80.5.1.1	String	read-write
NUM iBMPSGTachometerLowerThresholdCritical	1.3.6.1.4.1.2.6.159.1.1.80.5.1.12	Sint32	read-write
NUM iBMPSGTachometerLowerThresholdFatal	1.3.6.1.4.1.2.6.159.1.1.80.5.1.14	Sint32	read-write
NUM iBMPSGTachometerLowerThresholdNonCritical	1.3.6.1.4.1.2.6.159.1.1.80.5.1.10	Sint32	read-write
NUM iBMPSGTachometerMaxReadable	1.3.6.1.4.1.2.6.159.1.1.80.5.1.6	Sint32	read-write
NUM iBMPSGTachometerMinReadable	1.3.6.1.4.1.2.6.159.1.1.80.5.1.7	Sint32	read-write
NUM iBMPSGTachometerNominalReading	1.3.6.1.4.1.2.6.159.1.1.80.5.1.3	Sint32	read-write
NUM iBMPSGTachometerNormalMax	1.3.6.1.4.1.2.6.159.1.1.80.5.1.4	Sint32	read-write
NUM iBMPSGTachometerNormalMin	1.3.6.1.4.1.2.6.159.1.1.80.5.1.5	Sint32	read-write
NUM iBMPSGTachometerResolution	1.3.6.1.4.1.2.6.159.1.1.80.5.1.8	Uint32	read-write
STR iBMPSGTachometerStatus	1.3.6.1.4.1.2.6.159.1.1.80.5.1.20	String	read-write	The Status property is a string indicating the current status of the object. Various operational and non-operational statuses can be defined. Operational statuses are OK, Degraded and Pred Fail. Pred Fail indicates that an element may be functioning properly but predicting a failure in the near future. An example is a SMART-enabled hard drive. Non-operational statuses can also be specified. These are Error, Starting, Stopping and Service. The latter, Service, could apply during mirror-resilvering of a disk, reload of a user permissions list, or other administrative work. Not all such work is on-line, yet the managed element is neither OK nor in one of the other states.
iBMPSGTachometerTable	1.3.6.1.4.1.2.6.159.1.1.80.5		not-accessible	The IBMPSG_Tachometer class represents an IBM managed Fan speed Sensor
NUM iBMPSGTachometerTolerance	1.3.6.1.4.1.2.6.159.1.1.80.5.1.9	Sint32	read-write
NUM iBMPSGTachometerUpperThresholdCritical	1.3.6.1.4.1.2.6.159.1.1.80.5.1.13	Sint32	read-write
NUM iBMPSGTachometerUpperThresholdFatal	1.3.6.1.4.1.2.6.159.1.1.80.5.1.15	Sint32	read-write
NUM iBMPSGTachometerUpperThresholdNonCritical	1.3.6.1.4.1.2.6.159.1.1.80.5.1.11	Sint32	read-write
NUM iBMPSGTemperatureSensorAccuracy	1.3.6.1.4.1.2.6.159.1.1.80.1.1.10	Sint32	read-write
NUM iBMPSGTemperatureSensorCurrentReading	1.3.6.1.4.1.2.6.159.1.1.80.1.1.2	Sint32	read-write
iBMPSGTemperatureSensorEntry	1.3.6.1.4.1.2.6.159.1.1.80.1.1		not-accessible
BOO iBMPSGTemperatureSensorEventAutoClearEnabled	1.3.6.1.4.1.2.6.159.1.1.80.1.1.20	Boolean	read-write	False means that events are only generated on state changes. True means that events are generated on state changes and periodically when the object is in a non-normal state.
BOO iBMPSGTemperatureSensorEventsEnabled	1.3.6.1.4.1.2.6.159.1.1.80.1.1.18	Boolean	read-write	Event generation status.
STR iBMPSGTemperatureSensorKeyIndex	1.3.6.1.4.1.2.6.159.1.1.80.1.1.1	String	read-write
NUM iBMPSGTemperatureSensorLowerThresholdCritical	1.3.6.1.4.1.2.6.159.1.1.80.1.1.13	Sint32	read-write
NUM iBMPSGTemperatureSensorLowerThresholdFatal	1.3.6.1.4.1.2.6.159.1.1.80.1.1.15	Sint32	read-write
NUM iBMPSGTemperatureSensorLowerThresholdNonCritical	1.3.6.1.4.1.2.6.159.1.1.80.1.1.11	Sint32	read-write
NUM iBMPSGTemperatureSensorMaxReadable	1.3.6.1.4.1.2.6.159.1.1.80.1.1.6	Sint32	read-write
NUM iBMPSGTemperatureSensorMinReadable	1.3.6.1.4.1.2.6.159.1.1.80.1.1.7	Sint32	read-write
NUM iBMPSGTemperatureSensorNominalReading	1.3.6.1.4.1.2.6.159.1.1.80.1.1.3	Sint32	read-write
NUM iBMPSGTemperatureSensorNormalMax	1.3.6.1.4.1.2.6.159.1.1.80.1.1.4	Sint32	read-write
NUM iBMPSGTemperatureSensorNormalMin	1.3.6.1.4.1.2.6.159.1.1.80.1.1.5	Sint32	read-write
NUM iBMPSGTemperatureSensorPollingInterval	1.3.6.1.4.1.2.6.159.1.1.80.1.1.19	Uint32	read-write	Polling interval is measured in seconds. Value of zero indicates do it once and quit. Minimum polling interval is ten seconds.
NUM iBMPSGTemperatureSensorResolution	1.3.6.1.4.1.2.6.159.1.1.80.1.1.8	Uint32	read-write
STR iBMPSGTemperatureSensorStatus	1.3.6.1.4.1.2.6.159.1.1.80.1.1.21	String	read-write	The Status property is a string indicating the current status of the object. Various operational and non-operational statuses can be defined. Operational statuses are OK, Degraded and Pred Fail. Pred Fail indicates that an element may be functioning properly but predicting a failure in the near future. An example is a SMART-enabled hard drive. Non-operational statuses can also be specified. These are Error, Starting, Stopping and Service. The latter, Service, could apply during mirror-resilvering of a disk, reload of a user permissions list, or other administrative work. Not all such work is on-line, yet the managed element is neither OK nor in one of the other states.
iBMPSGTemperatureSensorTable	1.3.6.1.4.1.2.6.159.1.1.80.1		not-accessible	The IBMPSG_TemperatureSensor class represents an IBM managed Temperature Sensor.
NUM iBMPSGTemperatureSensorTempLocation	1.3.6.1.4.1.2.6.159.1.1.80.1.1.17	Uint32	read-write	The current temperature sensor location
NUM iBMPSGTemperatureSensorTolerance	1.3.6.1.4.1.2.6.159.1.1.80.1.1.9	Sint32	read-write
NUM iBMPSGTemperatureSensorUpperThresholdCritical	1.3.6.1.4.1.2.6.159.1.1.80.1.1.14	Sint32	read-write
NUM iBMPSGTemperatureSensorUpperThresholdFatal	1.3.6.1.4.1.2.6.159.1.1.80.1.1.16	Sint32	read-write
NUM iBMPSGTemperatureSensorUpperThresholdNonCritical	1.3.6.1.4.1.2.6.159.1.1.80.1.1.12	Sint32	read-write
NUM iBMPSGVoltageSensorAccuracy	1.3.6.1.4.1.2.6.159.1.1.80.2.1.10	Sint32	read-write
NUM iBMPSGVoltageSensorCurrentReading	1.3.6.1.4.1.2.6.159.1.1.80.2.1.2	Sint32	read-write
iBMPSGVoltageSensorEntry	1.3.6.1.4.1.2.6.159.1.1.80.2.1		not-accessible
BOO iBMPSGVoltageSensorEventAutoClearEnabled	1.3.6.1.4.1.2.6.159.1.1.80.2.1.20	Boolean	read-write	False means that events are only generated on state changes. True means that events are generated on state changes and periodically when the object is in a non-normal state.
BOO iBMPSGVoltageSensorEventsEnabled	1.3.6.1.4.1.2.6.159.1.1.80.2.1.18	Boolean	read-write	Event generation status.
STR iBMPSGVoltageSensorKeyIndex	1.3.6.1.4.1.2.6.159.1.1.80.2.1.1	String	read-write
NUM iBMPSGVoltageSensorLowerThresholdCritical	1.3.6.1.4.1.2.6.159.1.1.80.2.1.13	Sint32	read-write
NUM iBMPSGVoltageSensorLowerThresholdFatal	1.3.6.1.4.1.2.6.159.1.1.80.2.1.15	Sint32	read-write
NUM iBMPSGVoltageSensorLowerThresholdNonCritical	1.3.6.1.4.1.2.6.159.1.1.80.2.1.11	Sint32	read-write
NUM iBMPSGVoltageSensorMaxReadable	1.3.6.1.4.1.2.6.159.1.1.80.2.1.6	Sint32	read-write
NUM iBMPSGVoltageSensorMinReadable	1.3.6.1.4.1.2.6.159.1.1.80.2.1.7	Sint32	read-write
NUM iBMPSGVoltageSensorNominalReading	1.3.6.1.4.1.2.6.159.1.1.80.2.1.3	Sint32	read-write
NUM iBMPSGVoltageSensorNormalMax	1.3.6.1.4.1.2.6.159.1.1.80.2.1.4	Sint32	read-write
NUM iBMPSGVoltageSensorNormalMin	1.3.6.1.4.1.2.6.159.1.1.80.2.1.5	Sint32	read-write
NUM iBMPSGVoltageSensorPollingInterval	1.3.6.1.4.1.2.6.159.1.1.80.2.1.19	Uint32	read-write	Polling interval is measured in seconds. Value of zero indicates do it once and quit. Minimum polling interval is ten seconds.
NUM iBMPSGVoltageSensorResolution	1.3.6.1.4.1.2.6.159.1.1.80.2.1.8	Uint32	read-write
STR iBMPSGVoltageSensorStatus	1.3.6.1.4.1.2.6.159.1.1.80.2.1.21	String	read-write	The Status property is a string indicating the current status of the object. Various operational and non-operational statuses can be defined. Operational statuses are OK, Degraded and Pred Fail. Pred Fail indicates that an element may be functioning properly but predicting a failure in the near future. An example is a SMART-enabled hard drive. Non-operational statuses can also be specified. These are Error, Starting, Stopping and Service. The latter, Service, could apply during mirror-resilvering of a disk, reload of a user permissions list, or other administrative work. Not all such work is on-line, yet the managed element is neither OK nor in one of the other states.
iBMPSGVoltageSensorTable	1.3.6.1.4.1.2.6.159.1.1.80.2		not-accessible	The IBMPSG_VoltageSensor class represents an IBM managed voltage Sensor
NUM iBMPSGVoltageSensorTolerance	1.3.6.1.4.1.2.6.159.1.1.80.2.1.9	Sint32	read-write
NUM iBMPSGVoltageSensorUpperThresholdCritical	1.3.6.1.4.1.2.6.159.1.1.80.2.1.14	Sint32	read-write
NUM iBMPSGVoltageSensorUpperThresholdFatal	1.3.6.1.4.1.2.6.159.1.1.80.2.1.16	Sint32	read-write
NUM iBMPSGVoltageSensorUpperThresholdNonCritical	1.3.6.1.4.1.2.6.159.1.1.80.2.1.12	Sint32	read-write
NUM iBMPSGVoltageSensorVoltageType	1.3.6.1.4.1.2.6.159.1.1.80.2.1.17	Uint32	read-write	The Voltage Description

RFC description

UMS/IBM PSG Local Management Sensor MIB providing temperature sensor readings, thresholds, and related environmental monitoring information.

Start monitoring blade server / chassis with embedded temperature sensors (temperature-sensor reading/threshold status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download UMSLMSENSOR-MIB

What Is UMSLMSENSOR-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description