UBQS-QOS-MIB

All MIBs › UBQS-QOS-MIB

Organization: Ubiquoss Corp.

Last Updated: 2010-11-05

Description: MIB for configuring and monitoring Quality of Service class maps, policy maps, and service-policy bindings on Ubiquoss network devices

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is UBQS-QOS-MIB?

UBQS-QOS-MIB is a Ubiquoss enterprise MIB for configuring and monitoring Quality of Service (QoS) features on Ubiquoss network devices, structured around the standard class-map/policy-map/service-policy model. It groups its objects into class-map, policy-map, and service-policy sub-trees, exposing configuration of traffic classification rules, the policies (e.g. shaping, marking, queuing) built from those classes, and the binding of policies to specific interfaces or services. This MIB is used to monitor the software-level QoS configuration status of the device -- specifically whether the intended class maps and policy maps are correctly defined and successfully applied via service-policy bindings -- functioning as a traffic-management configuration and verification MIB rather than exposing hardware sensor data. Its class-map/policy-map naming convention conceptually mirrors the structure used in IETF DIFFSERV-MIB-style QoS models, though it is an independent enterprise implementation. It is typically deployed in Ubiquoss access/aggregation network equipment where per-service QoS enforcement must be verified. Network engineers evaluating or troubleshooting this functionality can download the UBQS-QOS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in UBQS-QOS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Ubiquoss network access/aggregation devices

Monitoring Examples

An administrator would poll ubiClassMapMIBObjects and ubiPolicyMapMIBObjects to confirm the traffic classification rules and associated policy actions are defined as expected, then check ubiServicePolicyMIBObjects to verify a policy has actually been bound to the intended interface or service. A missing or unexpected service-policy binding would reveal that QoS enforcement (e.g. rate limiting for a subscriber service) is not being applied as configured.

What Can Be Monitored

class map definitions
policy map configuration
service-policy bindings
QoS enforcement status

Imported Objects

From INET-ADDRESS-MIB

InetAddress
InetAddressPrefixLength
InetAddressType
InetVersion

From Q-BRIDGE-MIB

VlanIndex

From RFC1213-MIB

DisplayString
PhysAddress

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

RowStatus
TruthValue

From UBQS-SMI

ubiMgmtv2

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
ubiQosMIB	1.3.6.1.4.1.7800.100.12			This UBQS-QOS-MIB mib contains the information about Quality of Service(QoS).
ubiQosMIBNotificationsPrefix	1.3.6.1.4.1.7800.100.12.0
ubiClassMapMIBObjects	1.3.6.1.4.1.7800.100.12.1
ubiClassMapTable	1.3.6.1.4.1.7800.100.12.1.1		not-accessible	The table of class map about QOS
ubiClassMapEntry	1.3.6.1.4.1.7800.100.12.1.1.1		not-accessible	An entry in ubiClassMapTable, representing class map list created. can create or remove class map entry.
STR ubiClassMapName	1.3.6.1.4.1.7800.100.12.1.1.1.1	DisplayString	read-only	Class map name
ROW ubiClassMapRowStatus	1.3.6.1.4.1.7800.100.12.1.1.1.2	RowStatus	read-create	Create or remove class map
ubiClassMapMatchTable	1.3.6.1.4.1.7800.100.12.1.2		not-accessible	The table of matching entrys of class map
ubiClassMapMatchEntry	1.3.6.1.4.1.7800.100.12.1.2.1		not-accessible	An entry in ubiClassMapMatchTable, representing each matching entry of class map.
INT ubiCmMatchType	1.3.6.1.4.1.7800.100.12.1.2.1.1	INTEGER	read-write	Matching entry type
STR ubiCmMatchAcl	1.3.6.1.4.1.7800.100.12.1.2.1.2	DisplayString	read-write	Access-list name. If need to unset access-list, set NULL string.
I32 ubiCmMatchCos	1.3.6.1.4.1.7800.100.12.1.2.1.3	Integer32	read-write	Cos matching value. -1 means no filter (none).
STR ubiCmMatchEtherType	1.3.6.1.4.1.7800.100.12.1.2.1.4	DisplayString	read-write	Ethernet type matching value. For example, '80dd'
I32 ubiCmMatchIpDscp	1.3.6.1.4.1.7800.100.12.1.2.1.5	Integer32	read-write	DSCP matching value
I32 ubiCmMatchIpPrecedence	1.3.6.1.4.1.7800.100.12.1.2.1.6	Integer32	read-write	IP Precedence matching value
I32 ubiCmMatchSourcePort	1.3.6.1.4.1.7800.100.12.1.2.1.7	Integer32	read-write	Source port matching value
I32 ubiCmMatchDestPort	1.3.6.1.4.1.7800.100.12.1.2.1.8	Integer32	read-write	Destination matching value
I32 ubiCmMatchMplsExp	1.3.6.1.4.1.7800.100.12.1.2.1.9	Integer32	read-write	MPLS experimental bit matching value
I32 ubiCmMatchProtocol	1.3.6.1.4.1.7800.100.12.1.2.1.10	Integer32	read-write	Protocol number matching value. well-known value for protocol below: 1 icmp Internet Control Management Protocol 2 igmp Internet Group Management Protocol 0 ip Any Internat Protocol 103 ospf OSPF routing protocol 89 pim Protocol Independent Protocol 6 tcp Transmission Control Protocol 17 udp User Datagram Protocol and so on.
INT ubiCmMatchTagType	1.3.6.1.4.1.7800.100.12.1.2.1.11	INTEGER	read-write	Tagging type matching value
STR ubiCmMatchTcpControl	1.3.6.1.4.1.7800.100.12.1.2.1.12	DisplayString	read-write	TCP Control bit matching value. available value for TCP Control below: URG 32 100000 ACK 16 010000 PSH 8 001000 RST 4 000100 SYN 2 000010 FIN 1 000001 '' : no tcp control
STR ubiCmMatchArp	1.3.6.1.4.1.7800.100.12.1.2.1.13	DisplayString	read-write	The types of arp configuration are: 1) SET arp (0.0.0.0/0 0.0.0.0/0) 2) SET arp with a particular source/destination address ('%d.%d.%d.%d/%d %d.%d.%d.%d/%d') 3) Unset arp (empty string(''))
I32 ubiCmMatchVlan	1.3.6.1.4.1.7800.100.12.1.2.1.14	Integer32	read-write	Vlan matching value
I32 ubiCmMatchVlanInner	1.3.6.1.4.1.7800.100.12.1.2.1.15	Integer32	read-write	Inner Vlan matching value
ubiClassMapMatchVlanTable	1.3.6.1.4.1.7800.100.12.1.3		not-accessible	The table of vlan matching value of class map
ubiClassMapMatchVlanEntry	1.3.6.1.4.1.7800.100.12.1.3.1		not-accessible	An entry in ubiClassMapVlanTable, representing vlan matching list entry.
I32 ubiCmMatchVlanIndex	1.3.6.1.4.1.7800.100.12.1.3.1.1	Integer32	not-accessible	The index of vlan matching on class map
ROW ubiCmMatchVlanRowStatus	1.3.6.1.4.1.7800.100.12.1.3.1.2	RowStatus	read-create	create or remove vlan matching entry
ubiPolicyMapMIBObjects	1.3.6.1.4.1.7800.100.12.2
ubiPolicyMapTable	1.3.6.1.4.1.7800.100.12.2.1		not-accessible	The table of policy map about QOS
ubiPolicyMapEntry	1.3.6.1.4.1.7800.100.12.2.1.1		not-accessible	An entry in ubiPolicyMapTable, representing policy map list created.
STR ubiPolicyMapName	1.3.6.1.4.1.7800.100.12.2.1.1.1	DisplayString	read-only	Policy map name created
ROW ubiPolicyMapRowStatus	1.3.6.1.4.1.7800.100.12.2.1.1.2	RowStatus	read-create	Create or remove a policy map entry.
ubiPolicyMapClassTable	1.3.6.1.4.1.7800.100.12.2.2		not-accessible	The table of class map of policy map
ubiPolicyMapClassEntry	1.3.6.1.4.1.7800.100.12.2.2.1		not-accessible	An entry in ubiPolicyMapClassTable, representing class map entry of policy map.
I32 ubiPolicyMapClassIndex	1.3.6.1.4.1.7800.100.12.2.2.1.1	Integer32	not-accessible	Class map index in policy map structure. If a class index is zero, it means that the smallest index that can be used is assigned when the new instance is created.
STR ubiPolicyMapClassName	1.3.6.1.4.1.7800.100.12.2.2.1.2	DisplayString	read-create	Class map name of policy map
ROW ubiPolicyMapClassRowStatus	1.3.6.1.4.1.7800.100.12.2.2.1.3	RowStatus	read-create	Create or remove a class map entry.
ubiPolicyMapActionTable	1.3.6.1.4.1.7800.100.12.2.3		not-accessible	The table of action set of policy map
ubiPolicyMapActionEntry	1.3.6.1.4.1.7800.100.12.2.3.1		not-accessible	An entry in ubiPolicyMapActionTable, representing action set entry of policy map.
INT ubiPmActionDrop	1.3.6.1.4.1.7800.100.12.2.3.1.1	INTEGER	read-write	Drop the packet
INT ubiPmActionMirror	1.3.6.1.4.1.7800.100.12.2.3.1.2	INTEGER	read-write	Mirror the packet to another interface
INT ubiPmActionNetFlow	1.3.6.1.4.1.7800.100.12.2.3.1.3	INTEGER	read-write	Send packets to netflow device
I32 ubiPmActionRedirectifIndex	1.3.6.1.4.1.7800.100.12.2.3.1.4	Integer32	read-write	Redirect the packet to another interface. if need to unset, set a value 0
INT ubiPmActionTrapCpu	1.3.6.1.4.1.7800.100.12.2.3.1.5	INTEGER	read-write	Trap the packet to CPU
INT ubiPmActionTrustDscp	1.3.6.1.4.1.7800.100.12.2.3.1.6	INTEGER	read-write	Specify trust state for policy-map
STR ubiPmActionPoliceRate	1.3.6.1.4.1.7800.100.12.2.3.1.7	DisplayString	read-write	Policy rate set value. input avg-rate and ' '(space) and bur-rate. example : 111111 222222 if need to unset, set a value ''(empty string)
STR ubiPmActionPoliceAggName	1.3.6.1.4.1.7800.100.12.2.3.1.8	DisplayString	read-write	You could set aggregate policer instead of policy rate. if need to unset, set a value ''(empty string)
I32 ubiPmActionCos	1.3.6.1.4.1.7800.100.12.2.3.1.9	Integer32	read-write	COS set value of VLAN tag. if need to unset, set a value -1.
INT ubiPmActionDropPrecedence	1.3.6.1.4.1.7800.100.12.2.3.1.10	INTEGER	read-write	Drop precedence set value of Diffserv. if need to unset, set a value 0.
I32 ubiPmActionIpDscp	1.3.6.1.4.1.7800.100.12.2.3.1.11	Integer32	read-write	DSCP set value. if need to unset, set a value -1.
I32 ubiPmActionIpPrecedence	1.3.6.1.4.1.7800.100.12.2.3.1.12	Integer32	read-write	IP precedence set value. if need to unset, set a value -1.
I32 ubiPmActionQueueing	1.3.6.1.4.1.7800.100.12.2.3.1.13	Integer32	read-write	Queue set value. if need to unset, set a value -1.
STR ubiPmActionVlanPriority	1.3.6.1.4.1.7800.100.12.2.3.1.14	DisplayString	read-write	Represents the vlan priority for each queue: '%d %d %d %d %d %d %d %d' # Queue vlan prirory -------- ------------- 0 1 2 3 4 5 6 7 if need to unset, set a value ''(empty string).
STR ubiPmActionPoliceCirPir	1.3.6.1.4.1.7800.100.12.2.3.1.15	DisplayString	read-write	Represents the CIR and PIR configuration: '%d %d %d %d' # Description ---------------------------------------- 1 Committed information rate (kbps) 2 Conform burst (kbps) 3 PIR (kbps) 4 Excess burst (kbps) if need to unset, set a value ''(empty string)
STR ubiPmActionTagVlan	1.3.6.1.4.1.7800.100.12.2.3.1.16	DisplayString	read-write	Represents the tag vlan: '%d %d' # Description ---------------------------------------- 1 Inner tag vlan ID 2 Outer tag vlan ID The second value could be zero (0) when get/set
ubiPolicyMapActionNexthopTable	1.3.6.1.4.1.7800.100.12.2.4		not-accessible	The table of nexthop IP address of policy map
ubiPolicyMapActionNexthopEntry	1.3.6.1.4.1.7800.100.12.2.4.1		not-accessible	An entry in ubiPolicyMapActionNexthopTable, representing nexthop IP address entry of policy map.
I32 ubiPmActionNexthopIndex	1.3.6.1.4.1.7800.100.12.2.4.1.1	Integer32	not-accessible	Nexthop entry index in Policy map structure.
IPt ubiPmActionNextHopAddrType	1.3.6.1.4.1.7800.100.12.2.4.1.2	InetAddressType	read-create	Nexthop address type
IP ubiPmActionNexthopAddress	1.3.6.1.4.1.7800.100.12.2.4.1.3	InetAddress	read-create	Nexthop IP address
I32 ubiPmActionNexthopPriority	1.3.6.1.4.1.7800.100.12.2.4.1.4	Integer32	read-create	Priority of nexthop IP address. low value is to mean high priority.
ROW ubiPmActionNexthopRowStatus	1.3.6.1.4.1.7800.100.12.2.4.1.5	RowStatus	read-create	Create or remove a nexthop IP address.
ubiPolicyGlobal	1.3.6.1.4.1.7800.100.12.2.5
INT ubiPolicyMapClassDelete	1.3.6.1.4.1.7800.100.12.2.5.1	INTEGER	read-write	This object is function that delete the mapping information of class map(s) for a particular policy map.
ubiServicePolicyMIBObjects	1.3.6.1.4.1.7800.100.12.3
ubiServicePolicyTable	1.3.6.1.4.1.7800.100.12.3.1		not-accessible	The table of service policy information
ubiServicePolicyEntry	1.3.6.1.4.1.7800.100.12.3.1.1		not-accessible	An entry in ubiServicePolicyTable, representing an entry of service policy.
STR ubiServicePolicyName	1.3.6.1.4.1.7800.100.12.3.1.1.1	DisplayString	read-only	A textual string containing information about the service policy.
INT ubiServicePolicyDirection	1.3.6.1.4.1.7800.100.12.3.1.1.2	INTEGER	read-only	Indicates the interface direction which set service policy.
ROW ubiServicePolicyRowStatus	1.3.6.1.4.1.7800.100.12.3.1.1.3	RowStatus	read-create	Create or remove the service policy.
ubiQosMIBObjects	1.3.6.1.4.1.7800.100.12.4
ubiQosMap	1.3.6.1.4.1.7800.100.12.4.1
ubiCosMapTable	1.3.6.1.4.1.7800.100.12.4.1.1		not-accessible	The table of COS map of QOS
ubiCosMapEntry	1.3.6.1.4.1.7800.100.12.4.1.1.1		not-accessible	An entry in ubiCosMapTable, representing COS map entry of QOS.
I32 ubiCosMapIndex	1.3.6.1.4.1.7800.100.12.4.1.1.1.1	Integer32	not-accessible	COS map index
I32 ubiCosToDscpMapValue	1.3.6.1.4.1.7800.100.12.4.1.1.1.2	Integer32	read-write	COS to DSCP map value
I32 ubiCosToMutationMapValue	1.3.6.1.4.1.7800.100.12.4.1.1.1.3	Integer32	read-write	COS to other COS mapping value
I32 ubiCosToQueueMapValue	1.3.6.1.4.1.7800.100.12.4.1.1.1.4	Integer32	read-write	COS to Queue mapping value
ubiDscpMapTable	1.3.6.1.4.1.7800.100.12.4.1.2		not-accessible	The table of DSCP map of QOS
ubiDscpMapEntry	1.3.6.1.4.1.7800.100.12.4.1.2.1		not-accessible	An entry in ubiDscpMapTable, representing DSCP map entry of QOS.
I32 ubiDscpMapIndex	1.3.6.1.4.1.7800.100.12.4.1.2.1.1	Integer32	not-accessible	DSCP map index
I32 ubiDscpToCosMapValue	1.3.6.1.4.1.7800.100.12.4.1.2.1.2	Integer32	read-write	DSCP to COS mapping value
I32 ubiDscpToMutationMapValue	1.3.6.1.4.1.7800.100.12.4.1.2.1.3	Integer32	read-write	DSCP to other DSCP mapping value
I32 ubiDscpToQueueMapValue	1.3.6.1.4.1.7800.100.12.4.1.2.1.4	Integer32	read-write	DSCP to Queue mapping value
ubiTxSchedule	1.3.6.1.4.1.7800.100.12.4.1.3
ubiTxScheduleTable	1.3.6.1.4.1.7800.100.12.4.1.3.1		not-accessible	The table of tx-scheduling map of QOS
ubiTxScheduleEntry	1.3.6.1.4.1.7800.100.12.4.1.3.1.1		not-accessible	An entry in ubiTxScheduleTable, representing tx-scheduling map entry.
STR ubiTxScheduleName	1.3.6.1.4.1.7800.100.12.4.1.3.1.1.1	DisplayString	read-only	tx-scheduling entry name
I32 ubiTxScheduleIfIndex	1.3.6.1.4.1.7800.100.12.4.1.3.1.1.2	Integer32	read-write
ROW ubiTxScheduleRowStatus	1.3.6.1.4.1.7800.100.12.4.1.3.1.1.3	RowStatus	read-create	create or remove tx-scheduling entry
ubiTxScheduleQueueTable	1.3.6.1.4.1.7800.100.12.4.1.3.2		not-accessible	The table of tx-scheduling queue value
ubiTxScheduleQueueEntry	1.3.6.1.4.1.7800.100.12.4.1.3.2.1		not-accessible	An entry in ubiTxScheduleQueueTable, representing queue value of tx-scheduling.
I32 ubiTxScheduleQueueIndex	1.3.6.1.4.1.7800.100.12.4.1.3.2.1.1	Integer32	read-only	The unique identifier of Tx scheduling queue.
INT ubiTxScheduleQueueMethod	1.3.6.1.4.1.7800.100.12.4.1.3.2.1.2	INTEGER	read-write	queue method value
I32 ubiTxScheduleQueueWeight	1.3.6.1.4.1.7800.100.12.4.1.3.2.1.3	Integer32	read-write	queue weight value. in strict mode, weight value is 1.
ubiAggPoliceTable	1.3.6.1.4.1.7800.100.12.4.2		not-accessible
ubiAggPoliceEntry	1.3.6.1.4.1.7800.100.12.4.2.1		not-accessible
STR ubiAggPoliceAggName	1.3.6.1.4.1.7800.100.12.4.2.1.1	DisplayString	read-only	A textual string containing information about the the aggregate-police.
I32 ubiAggPoliceAvgTrafficRate	1.3.6.1.4.1.7800.100.12.4.2.1.2	Integer32	read-create	Specify an average traffic rate.
I32 ubiAggPoliceAvgBurstRate	1.3.6.1.4.1.7800.100.12.4.2.1.3	Integer32	read-create	Specify an average burst rate.
ROW ubiAggPoliceRowStatus	1.3.6.1.4.1.7800.100.12.4.2.1.4	RowStatus	read-create	Create or remove an aggregate-police entry.
ubiVlanPriorityOverrideTable	1.3.6.1.4.1.7800.100.12.4.3		not-accessible	vlan-priority-override table
ubiVlanPriorityOverrideEntry	1.3.6.1.4.1.7800.100.12.4.3.1		not-accessible	vlan-priority-override entry
INT ubiVlanPriority	1.3.6.1.4.1.7800.100.12.4.3.1.1	INTEGER	read-write	vlan-priority-override priority
ubiMinReserveTable	1.3.6.1.4.1.7800.100.12.4.4		not-accessible	min-reserve table
ubiMinReserveEntry	1.3.6.1.4.1.7800.100.12.4.4.1		not-accessible	min-reserve entry
I32 ubiMinReserveLevelID	1.3.6.1.4.1.7800.100.12.4.4.1.1	Integer32	not-accessible	min-reserve level-id
INT ubiMinReserveHoldingPacket	1.3.6.1.4.1.7800.100.12.4.4.1.2	INTEGER	read-write	min-reserve holding-packet
ubiInterfaceQosTable	1.3.6.1.4.1.7800.100.12.4.5		not-accessible
ubiInterfaceQosEntry	1.3.6.1.4.1.7800.100.12.4.5.1		not-accessible
INT ubiInterfaceQosCos	1.3.6.1.4.1.7800.100.12.4.5.1.1	INTEGER	read-write	mls qos cos
T/F ubiInterfaceCosDscp	1.3.6.1.4.1.7800.100.12.4.5.1.2	TruthValue	read-write	mls qos cos-dscp
T/F ubiInterfaceCosMutation	1.3.6.1.4.1.7800.100.12.4.5.1.3	TruthValue	read-write	mls qos cos-mutation
INT ubiInterfaceDaPrioOveride	1.3.6.1.4.1.7800.100.12.4.5.1.4	INTEGER	read-write	mls qos da-priority-override
T/F ubiInterfaceDscpCos	1.3.6.1.4.1.7800.100.12.4.5.1.5	TruthValue	read-write	mls qos dscp-cos
T/F ubiInterfaceDscpMutation	1.3.6.1.4.1.7800.100.12.4.5.1.6	TruthValue	read-write	mls qos dscp-mutation
T/F ubiInterfaceForceTrustCos	1.3.6.1.4.1.7800.100.12.4.5.1.7	TruthValue	read-write	mls qos force-trust cos
INT ubiInterfaceTrust	1.3.6.1.4.1.7800.100.12.4.5.1.8	INTEGER	read-write	mls qos trust (cos[1]\|dscp[2]\|both[3])
STR ubiInterfaceTxScheduling	1.3.6.1.4.1.7800.100.12.4.5.1.9	DisplayString	read-write
INT ubiInterfaceVlanPrioOverride	1.3.6.1.4.1.7800.100.12.4.5.1.10	INTEGER	read-write	mls qos vlan-priority-override (cos[1]\|queue[2]\|both[3])
ubiQueueBufferTable	1.3.6.1.4.1.7800.100.12.4.6		not-accessible	Queue Buffer Table
ubiQueueBufferEntry	1.3.6.1.4.1.7800.100.12.4.6.1		not-accessible	Queue Buffer Entry
INT ubiQueueBufferID	1.3.6.1.4.1.7800.100.12.4.6.1.1	INTEGER	not-accessible	Queue Buffer identity.
INT ubiQueueBufferSize	1.3.6.1.4.1.7800.100.12.4.6.1.2	INTEGER	read-write	Queue Buffer size.
INT ubiQueueBufferDesc	1.3.6.1.4.1.7800.100.12.4.6.1.3	INTEGER	read-write	Queue Buffer description.
INT ubiQueueBufferSet	1.3.6.1.4.1.7800.100.12.4.6.1.4	INTEGER	read-write	Queue Buffer status. Apply values of ubiQueueBufferDesc and ubiQueueBufferSize.
ubiQosGlobal	1.3.6.1.4.1.7800.100.12.4.10
INT ubiQosEnable	1.3.6.1.4.1.7800.100.12.4.10.1	INTEGER	read-write	qos enable
ubiFrameTypePriorityOverride	1.3.6.1.4.1.7800.100.12.4.10.2
INT ubiBpduToCpu	1.3.6.1.4.1.7800.100.12.4.10.2.1	INTEGER	read-write	frame-type-priority-override bpdu-to-cpu
INT ubiUcastMgmtToCpu	1.3.6.1.4.1.7800.100.12.4.10.2.2	INTEGER	read-write	fream-type-priority-override ucast-mgmt-to-cpu
INT ubiFromCpu	1.3.6.1.4.1.7800.100.12.4.10.2.3	INTEGER	read-write	frame-type-priority-override from-cpu
INT ubiPortEtypeMatch	1.3.6.1.4.1.7800.100.12.4.10.2.4	INTEGER	read-write	fream-type-priority-override port-etype-match
ubiQosMIBConformance	1.3.6.1.4.1.7800.100.12.5
ubiQosMIBCompliances	1.3.6.1.4.1.7800.100.12.5.1
ubiQosMIBGroups	1.3.6.1.4.1.7800.100.12.5.2

RFC description

Quality of Service management MIB for Ubiquoss networking equipment with policy and scheduling controls.

Start monitoring Ubiquoss network access/aggregation devices (class-map/policy-map/service-policy config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download UBQS-QOS-MIB

What Is UBQS-QOS-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description