UBQS-MPLS-RSVP-MIB :: ubiRsvpPhpEnable

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › UBQS-MPLS-RSVP-MIB › ubiRsvpPhpEnable

ubiRsvpPhpEnable

Module: UBQS-MPLS-RSVP-MIB

OID (symbolic): UBQS-MPLS-RSVP-MIB::ubiRsvpPhpEnable

OID (numeric): 1.3.6.1.4.1.7800.100.24.4.1.1.4

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-write

Description: Enable/Disable local penultimate-hop-popping

What is ubiRsvpPhpEnable?

This object enables or disables penultimate-hop-popping (PHP) for RSVP-signaled label-switched paths, where the second-to-last router in the path removes the MPLS label before forwarding to the final destination. Administrators typically leave this enabled, as it defaults to true, since it saves the egress router from an extra label lookup. For example, an admin troubleshooting unexpected labeled traffic arriving at the tunnel's endpoint router would check whether this has been disabled, which would explain why the label wasn't popped a hop earlier as normally expected.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.7800.100.24.4.1.1.4
snmpwalk -v2c -c public <target> UBQS-MPLS-RSVP-MIB::ubiRsvpPhpEnable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.7800.100.24.4.1.1.4.1
snmpget -v2c -c public <target> UBQS-MPLS-RSVP-MIB::ubiRsvpPhpEnable.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.7800.100.24.4.1.1.4.1 s <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> ubiRsvpPhpEnable.1

Start monitoring Ubiquoss MPLS-capable router/switch (RSVP-TE tunnel/LSP operational status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the UBQS-MPLS-RSVP-MIB::ubiRsvpPhpEnable OID value, configure state conditions and alerts, and monitor any Ubiquoss MPLS-capable router/switch (RSVP-TE tunnel/LSP operational status) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.7800ubiquossUBIQUOSS-SMI
1.3.6.1.4.1.7800.100ubiMgmtv2UBQS-SMI
1.3.6.1.4.1.7800.100.24ubiMplsGroupMIBUBQS-SMI
Numeric OIDNameModule
1.3.6.1.4.1.7800.100.24.4ubiRsvpMIBUBQS-MPLS-RSVP-MIB
1.3.6.1.4.1.7800.100.24.4.1ubiRsvpMIBObjectsUBQS-MPLS-RSVP-MIB
1.3.6.1.4.1.7800.100.24.4.1.1ubiRsvpGlobalUBQS-MPLS-RSVP-MIB
1.3.6.1.4.1.7800.100.24.4.1.1.4ubiRsvpPhpEnableUBQS-MPLS-RSVP-MIB