All MIBs › UBQS-MPLS-MIB › ubiMplsIlmOwner
ubiMplsIlmOwner
Module: UBQS-MPLS-MIB
OID (symbolic): UBQS-MPLS-MIB::ubiMplsIlmOwner
OID (numeric): 1.3.6.1.4.1.7800.100.24.1.1.4.1.10
Node type: OBJECT-TYPE
Type: MplsOwner
Access: read-only
Description: The values of this enumeration are defined as follows:
unknown(1) - the local network management subsystem cannot discern which component created the object.
other(2) - the local network management subsystem is able to discern which component created the object, but the component is not listed within the following choices, e.g., command line interface (cli).
snmp(3) - The Simple Network Management Protocol was used to configure this object initially.
ldp(4) - The Label Distribution Protocol was used to configure this object initially.
crldp(5) - The Constraint-Based Label Distribution Protocol was used to configure this object initially.
rsvpTe(6) - The Resource Reservation Protocol was used to configure this object initially.
policyAgent(7) - A policy agent (perhaps in combination with one of the above protocols) was used to configure this object initially.
An object created by any of the above choices MAY be modified or destroyed by the same or a different choice.
What is ubiMplsIlmOwner?
Which mechanism created this ILM entry -- snmp, ldp, crldp, rsvpTe, a policy agent, cli (other), or unknown -- letting an admin distinguish manually provisioned label-swap entries from ones set up dynamically by a signaling protocol.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.7800.100.24.1.1.4.1.10 snmpwalk -v2c -c public <target> UBQS-MPLS-MIB::ubiMplsIlmOwner
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.7800.100.24.1.1.4.1.10.1 snmpget -v2c -c public <target> UBQS-MPLS-MIB::ubiMplsIlmOwner.1
Start monitoring Ubiquoss carrier Ethernet/MPLS switch (LSP trace/label-switching fault status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the UBQS-MPLS-MIB::ubiMplsIlmOwner OID value, configure state conditions and alerts, and monitor any Ubiquoss carrier Ethernet/MPLS switch (LSP trace/label-switching fault status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.7800 | ubiquoss | UBIQUOSS-SMI |
| 1.3.6.1.4.1.7800.100 | ubiMgmtv2 | UBQS-SMI |
| 1.3.6.1.4.1.7800.100.24 | ubiMplsGroupMIB | UBQS-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.7800.100.24.1 | ubiMplsMIB | UBQS-MPLS-MIB |
| 1.3.6.1.4.1.7800.100.24.1.1 | ubiMplsMIBObjects | UBQS-MPLS-MIB |
| 1.3.6.1.4.1.7800.100.24.1.1.4 | ubiMplsIlmTable | UBQS-MPLS-MIB |
| 1.3.6.1.4.1.7800.100.24.1.1.4.1 | ubiMplsIlmEntry | UBQS-MPLS-MIB |
| 1.3.6.1.4.1.7800.100.24.1.1.4.1.10 | ubiMplsIlmOwner | UBQS-MPLS-MIB |