All MIBs › UBQS-MPLS-MIB › ubiMplsFtnOwner
ubiMplsFtnOwner
Module: UBQS-MPLS-MIB
OID (symbolic): UBQS-MPLS-MIB::ubiMplsFtnOwner
OID (numeric): 1.3.6.1.4.1.7800.100.24.1.1.3.1.9
Node type: OBJECT-TYPE
Type: MplsOwner
Access: read-write
Description: The values of this enumeration are defined as follows:
unknown(1) - the local network management subsystem cannot discern which component created the object.
other(2) - the local network management subsystem is able to discern which component created the object, but the component is not listed within the following choices, e.g., command line interface (cli).
snmp(3) - The Simple Network Management Protocol was used to configure this object initially.
ldp(4) - The Label Distribution Protocol was used to configure this object initially.
crldp(5) - The Constraint-Based Label Distribution Protocol was used to configure this object initially.
rsvpTe(6) - The Resource Reservation Protocol was used to configure this object initially.
policyAgent(7) - A policy agent (perhaps in combination with one of the above protocols) was used to configure this object initially.
An object created by any of the above choices MAY be modified or destroyed by the same or a different choice.
What is ubiMplsFtnOwner?
Which mechanism created this FTN entry -- snmp, ldp, crldp, rsvpTe, a policy agent, cli (other), or unknown -- letting an admin tell manually provisioned entries apart from ones set up dynamically by a signaling protocol.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.7800.100.24.1.1.3.1.9 snmpwalk -v2c -c public <target> UBQS-MPLS-MIB::ubiMplsFtnOwner
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.7800.100.24.1.1.3.1.9.1 snmpget -v2c -c public <target> UBQS-MPLS-MIB::ubiMplsFtnOwner.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.7800.100.24.1.1.3.1.9.1 s <value>
Start monitoring Ubiquoss carrier Ethernet/MPLS switch (LSP trace/label-switching fault status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the UBQS-MPLS-MIB::ubiMplsFtnOwner OID value, configure state conditions and alerts, and monitor any Ubiquoss carrier Ethernet/MPLS switch (LSP trace/label-switching fault status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.7800 | ubiquoss | UBIQUOSS-SMI |
| 1.3.6.1.4.1.7800.100 | ubiMgmtv2 | UBQS-SMI |
| 1.3.6.1.4.1.7800.100.24 | ubiMplsGroupMIB | UBQS-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.7800.100.24.1 | ubiMplsMIB | UBQS-MPLS-MIB |
| 1.3.6.1.4.1.7800.100.24.1.1 | ubiMplsMIBObjects | UBQS-MPLS-MIB |
| 1.3.6.1.4.1.7800.100.24.1.1.3 | ubiMplsFtnTable | UBQS-MPLS-MIB |
| 1.3.6.1.4.1.7800.100.24.1.1.3.1 | ubiMplsFtnEntry | UBQS-MPLS-MIB |
| 1.3.6.1.4.1.7800.100.24.1.1.3.1.9 | ubiMplsFtnOwner | UBQS-MPLS-MIB |