All MIBs › UBIQUOSS-INTERFACE-MIB
Organization: Ubiquoss Corp.
Last Updated: 2006-07-13
Category: Ubiquoss Enterprise Networking
Description:
Manages Ubiquoss network interface configuration, operational state, and traffic statistics.
Imported Objects
From IANAifType-MIB
| IANAifType |
From RFC1213-MIB
| DisplayString |
From SNMPv2-SMI
| Counter32 | |
| Gauge32 |
From SNMPv2-TC
| TruthValue |
From UBIQUOSS-SMI
| ubiMgmt | OBJECT-IDENTITY |
From UBIQUOSS-SYSINFO-MIB
| ubiSysIndex | OBJECT-TYPE |
What Is UBIQUOSS-INTERFACE-MIB?
UBIQUOSS-INTERFACE-MIB is a Ubiquoss (Korean networking vendor) proprietary MIB defining port/interface information and management for Ubiquoss access/aggregation network switches. Based on the module description ('defines port information') and its conformance-group structure (notifications, compliances, groups), it establishes object groups and notification definitions for interface-related management, extending or complementing the standard IF-MIB with vendor-specific interface data and traps. Its role centers on interface-level hardware/software status - operational and configuration state of physical ports plus notifications for interface-related events such as link up/down - though the specific data objects/tables underlying these groups were not included in the sample provided. Administrators who download UBIQUOSS-INTERFACE-MIB definitions should expect conformance and notification groups rather than a full set of documented data tables. It builds on the standard IETF IF-MIB port/interface framework, extending it with Ubiquoss-specific interface objects and traps. It is typically deployed on Ubiquoss access/aggregation switches in carrier and enterprise access networks.
IPNetwork Monitor allows you to monitor SNMP objects defined in UBIQUOSS-INTERFACE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
What Can Be Monitored
- interface-related trap/notification events
- interface conformance/compliance group membership
Supported Devices
- Ubiquoss access/aggregation switch product line, entire range (port operational/link-event status)
Monitoring Examples
The sample objects provided - ubiInterfaceMIBNotificationPrefix, ubiInterfaceMIBNotifications, ubiInterfaceMIBConformance, ubiInterfaceMIBCompliances, ubiInterfaceMIBGroups - are conformance/notification-group definitions rather than actual data/table objects, so a concrete polling scenario with specific interface counters can't be honestly constructed from what's given; ubiInterfaceMIBNotifications indicates the module does define interface-related traps, likely link-state-change notifications, that a monitoring system would subscribe to.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| ubiInterfaceMIB | 1.3.6.1.4.1.7800.2.102 | This MIB module defines port information | ||
| ubiInterfaceMIBObjects | 1.3.6.1.4.1.7800.2.102.1 | |||
| ubiPortTable | 1.3.6.1.4.1.7800.2.102.1.1 | not-accessible | information of port | |
| ubiPortEntry | 1.3.6.1.4.1.7800.2.102.1.1.1 | not-accessible | information of port | |
| INT ubiPortIndex | 1.3.6.1.4.1.7800.2.102.1.1.1.1 | INTEGER | read-only | Port id |
| IAN ubiPortType | 1.3.6.1.4.1.7800.2.102.1.1.1.2 | IANAifType | read-only | Port type |
| INT ubiPortOperStatus | 1.3.6.1.4.1.7800.2.102.1.1.1.3 | INTEGER | read-only | link Up/Down |
| INT ubiPortAdminStatus | 1.3.6.1.4.1.7800.2.102.1.1.1.4 | INTEGER | read-write | administrator state |
| INT ubiPortBlockStatus | 1.3.6.1.4.1.7800.2.102.1.1.1.5 | INTEGER | read-write | block state |
| INT ubiPortEquipStatus | 1.3.6.1.4.1.7800.2.102.1.1.1.6 | INTEGER | read-only | administrator state |
| G32 ubiPortUpSpeedCurrent | 1.3.6.1.4.1.7800.2.102.1.1.1.7 | Gauge32 | read-only | |
| G32 ubiPortDownSpeedCurrent | 1.3.6.1.4.1.7800.2.102.1.1.1.8 | Gauge32 | read-only | |
| INT ubiPortFlowControl | 1.3.6.1.4.1.7800.2.102.1.1.1.9 | INTEGER | read-only | |
| INT ubiPortControl | 1.3.6.1.4.1.7800.2.102.1.1.1.10 | INTEGER | read-write | The port control |
| ubiPortTestResultTable | 1.3.6.1.4.1.7800.2.102.1.2 | not-accessible | information of port | |
| ubiPortTestResultEntry | 1.3.6.1.4.1.7800.2.102.1.2.1 | not-accessible | information of port | |
| C32 ubiPortTestResultTx | 1.3.6.1.4.1.7800.2.102.1.2.1.1 | Counter32 | read-only | Test tx count |
| C32 ubiPortTestResultRx | 1.3.6.1.4.1.7800.2.102.1.2.1.2 | Counter32 | read-only | Test rx count |
| G32 ubiPortTestResultMinRTT | 1.3.6.1.4.1.7800.2.102.1.2.1.3 | Gauge32 | read-only | Mininum Round Trip Time |
| G32 ubiPortTestResultAvgRTT | 1.3.6.1.4.1.7800.2.102.1.2.1.4 | Gauge32 | read-write | Avarage Round Trip Time |
| G32 ubiPortTestResultMaxRTT | 1.3.6.1.4.1.7800.2.102.1.2.1.5 | Gauge32 | read-write | Maximum Round Trip Time |
| OCT ubiPortTestResultTime | 1.3.6.1.4.1.7800.2.102.1.2.1.6 | OCTET STRING | read-only | Tested result time |
| INT ubiPortTestResultStatus | 1.3.6.1.4.1.7800.2.102.1.2.1.7 | INTEGER | read-only | Test result status sucess or fail or notavailable |
| ubiInterfaceMIBNotificationPrefix | 1.3.6.1.4.1.7800.2.102.2 | |||
| ubiInterfaceMIBNotifications | 1.3.6.1.4.1.7800.2.102.2.0 | |||
| NTF ubiPortAlarmNotification | 1.3.6.1.4.1.7800.2.102.2.0.1 | A ubiPortAlarmNotification is sent if port is function fail | ||
| NTF ubiPortOperStatusChangeNotification | 1.3.6.1.4.1.7800.2.102.2.0.2 | A ubiPortOperStatusChangeNotification is sent if port operational status change. | ||
| NTF ubiPortAdminStatusChangeNotification | 1.3.6.1.4.1.7800.2.102.2.0.3 | A ubiPortOperStatusChangeNotification is sent if port administravie status change. | ||
| NTF ubiPortBlockStatusChangeNotification | 1.3.6.1.4.1.7800.2.102.2.0.4 | A ubiPortBlockStatusChangeNotification is sent if port administravie status change. | ||
| NTF ubiPortGbicStatusChangeNotification | 1.3.6.1.4.1.7800.2.102.2.0.5 | A ubiPortGbicStatusChangeNotification is sent if port administravie status change. | ||
| NTF ubiPortSelfLoopDetectNotification | 1.3.6.1.4.1.7800.2.102.2.0.6 | A ubiPortOperStatusChangeNotification is sent if port operational status change. | ||
| NTF ubiChampConnectorStatusChangeNotification | 1.3.6.1.4.1.7800.2.102.2.0.7 | A ubiChampConnectorStatusChangeNotification is sent if champ connector equip status change. | ||
| NTF ubiPortLoopBackStatusChangeNotification | 1.3.6.1.4.1.7800.2.102.2.0.8 | A ubiPortLoopBackStatusNotification is sent if port loopback test status change. | ||
| NTF ubiPortLoopBackFailNotification | 1.3.6.1.4.1.7800.2.102.2.0.9 | A ubiPortLoopBackFailNotification is sent if port loopback test failed. | ||
| ubiInterfaceMIBConformance | 1.3.6.1.4.1.7800.2.102.3 | |||
| ubiInterfaceMIBCompliances | 1.3.6.1.4.1.7800.2.102.3.1 | |||
| ubiInterfaceMIBCompliance | 1.3.6.1.4.1.7800.2.102.3.1.1 | The compliance statement for entities which implement the ubiquoss port MIB. | ||
| ubiInterfaceMIBGroups | 1.3.6.1.4.1.7800.2.102.3.2 | |||
| ubiInterfaceMIBGroup | 1.3.6.1.4.1.7800.2.102.3.2.1 | ubiquoss port. | ||
| ubiInterfaceMIBNotifGroup | 1.3.6.1.4.1.7800.2.102.3.2.2 | A collection of notifications providing the notification for port. |
RFC description
Ubiquoss vendor-private MIB defining interface management objects for Ubiquoss network devices.
Start monitoring Ubiquoss access/aggregation switch product line, entire range (port operational/link-event status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.