All MIBs › TRIPPLITE-12X › tlEnvTemperatureInAlarm
tlEnvTemperatureInAlarm
Module: TRIPPLITE-12X
OID (symbolic): TRIPPLITE-12X::tlEnvTemperatureInAlarm
OID (numeric): 1.3.6.1.4.1.850.101.1.1.5
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-only
Description: Indicates whether or not temperature is in alarm.
What is tlEnvTemperatureInAlarm?
Indicates whether the current ambient temperature has crossed either the configured low or high limit. This is the field to poll or trap on for temperature-based alerting rather than comparing the raw reading yourself.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.850.101.1.1.5 snmpwalk -v2c -c public <target> TRIPPLITE-12X::tlEnvTemperatureInAlarm
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.850.101.1.1.5.1 snmpget -v2c -c public <target> TRIPPLITE-12X::tlEnvTemperatureInAlarm.1
Start monitoring Tripp Lite UPS, power distribution unit (PDU), PowerAlert-managed (email/SNMP contact config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TRIPPLITE-12X::tlEnvTemperatureInAlarm OID value, configure state conditions and alerts, and monitor any Tripp Lite UPS, power distribution unit (PDU), PowerAlert-managed (email/SNMP contact config status) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.850 | tripplite | TRIPPLITE |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.850.101 | tlEnviroSense | TRIPPLITE-12X |
| 1.3.6.1.4.1.850.101.1 | tlEnvEnvironment | TRIPPLITE-12X |
| 1.3.6.1.4.1.850.101.1.1 | tlEnvTemperatureData | TRIPPLITE-12X |
| 1.3.6.1.4.1.850.101.1.1.5 | tlEnvTemperatureInAlarm | TRIPPLITE-12X |