TRAPEZE-NETWORKS-BASIC-MIB

All MIBs › TRAPEZE-NETWORKS-BASIC-MIB

Organization: Trapeze Networks

Last Updated: 2009-11-16

Category: Switch and Device Management, Wireless LAN Management

Description: Manages Trapeze Networks basic WLAN controller configuration and fundamental operational parameters.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is TRAPEZE-NETWORKS-BASIC-MIB?

TRAPEZE-NETWORKS-BASIC-MIB is a vendor MIB from Trapeze Networks defining core identification and configuration objects for its wireless LAN controller (Access Controller) product line. It exposes basic system data: hardware serial number, running software major/minor version and version string, mobility domain name and seed IP, mobility-domain member table, and license entitlement information. Its monitoring value covers both hardware identification (serial number) and software status (running firmware version, mobility domain membership/health), which administrators use to confirm fleet-wide firmware consistency and licensing compliance across controllers participating in the same mobility domain. It works alongside other Trapeze MIBs such as the port and chassis-registration MIBs to give a fuller picture of the controller. It is deployed in enterprise WLAN environments running Trapeze (later Juniper/Belden) wireless switches organized into mobility domains for seamless roaming, making TRAPEZE-NETWORKS-BASIC-MIB SNMP monitoring essential for verifying firmware consistency across the domain.

IPNetwork Monitor allows you to monitor SNMP objects defined in TRAPEZE-NETWORKS-BASIC-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Trapeze Networks wireless LAN controller (Access Controller)

Monitoring Examples

An admin would poll trpzSwMajorVersionNumber/trpzSwMinorVersionNumber and trpzVersionString to confirm all controllers in a mobility domain (trpzMobilityDomainName) are running consistent firmware versions. The trpzMobilityMemberTable/trpzMobilityMemberEntry would be checked to verify all expected member controllers (trpzMobilityMemberEntryAddr) are present and reachable relative to the trpzMobilitySeedIp. A controller missing from the member table, or reporting a different trpzVersionString than its peers, would indicate a mobility domain or firmware inconsistency needing attention; trpzLicenseInfoTable would additionally be checked for license entitlement status.

What Can Be Monitored

hardware serial number
running software version
mobility domain name and seed IP
mobility domain member controllers
license entitlement information

Imported Objects

From SNMPv2-SMI

IpAddress
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString

From TRAPEZE-NETWORKS-LICENSE-FEATURE-TC-MIB

TrpzLicenseFeature

From TRAPEZE-NETWORKS-ROOT-MIB

trpzMibs

OBJECT-IDENTITY

How to Use in IPNetwork Monitor

Example using trpzMobilityMemberTableSize OID:

Select a Trapeze Networks wireless LAN controller, Access Controller (serial number/firmware-version/mobility-domain status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type trpzMobilityMemberTableSize into the Find box to locate it in the OID tree, then select it and click OK. The number of entries in the mobility member table, trpzMobilityMemberTable. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an INTEGER-type OID, Value bounds is the most useful condition here — trigger an alert if the count changes from its expected baseline, since that would indicate the underlying set of items changed unexpectedly. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
trpzBasic	1.3.6.1.4.1.14525.4.2			Basic objects for Trapeze Networks wireless switches. Copyright 2004-2009 Trapeze Networks, Inc. All rights reserved. This Trapeze Networks SNMP Management Information Base Specification (Specification) embodies Trapeze Networks' confidential and proprietary intellectual property. Trapeze Networks retains all title and ownership in the Specification, including any revisions. This Specification is supplied 'AS IS' and Trapeze Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
trpzBasicSystemInfo	1.3.6.1.4.1.14525.4.2.1
STR trpzSerialNumber	1.3.6.1.4.1.14525.4.2.1.1	DisplayString	read-only	The serial number of the switch.
INT trpzSwMajorVersionNumber	1.3.6.1.4.1.14525.4.2.1.2	INTEGER	read-only	The major release version of the running software.
INT trpzSwMinorVersionNumber	1.3.6.1.4.1.14525.4.2.1.3	INTEGER	read-only	The minor release version of the running software.
STR trpzVersionString	1.3.6.1.4.1.14525.4.2.1.4	DisplayString	read-only	The version string of the running software, including the major, minor, patch and build numbers, such as 3.0.0.185
trpzMobilityDomainInfo	1.3.6.1.4.1.14525.4.2.2
STR trpzMobilityDomainName	1.3.6.1.4.1.14525.4.2.2.1	DisplayString	read-only	The mobility domain containing the switch, or a zero-length string when the mobility domain is unknown.
IP trpzMobilitySeedIp	1.3.6.1.4.1.14525.4.2.2.2	IpAddress	read-only	The IPv4 address of the seed switch for this switch's mobility domain, or the IPv4 address 0.0.0.0 if unknown.
INT trpzMobilityMemberTableSizeEx	1.3.6.1.4.1.14525.4.2.2.3	INTEGER	read-only	The number of entries in the mobility member table, trpzMobilityMemberTable.
trpzMobilityMemberTable	1.3.6.1.4.1.14525.4.2.2.4		not-accessible	Table of members of the mobility domain, indexed by the member IPv4 address.
trpzMobilityMemberEntry	1.3.6.1.4.1.14525.4.2.2.4.1		not-accessible	An entry in the trpzMobilityMemberTable table.
IP trpzMobilityMemberEntryAddr	1.3.6.1.4.1.14525.4.2.2.4.1.1	IpAddress	read-only	IPv4 address of a member of the mobility domain.
trpzLicenseInfoGroup	1.3.6.1.4.1.14525.4.2.3
INT trpzLicenseInfoTableSize	1.3.6.1.4.1.14525.4.2.3.1	INTEGER	read-only	The number of entries in the license table, trpzLicenseInfoTable.
trpzLicenseInfoTable	1.3.6.1.4.1.14525.4.2.3.2		not-accessible	Table of installed licenses on the switch. The licences provide additional capabilities over the default capabilities of the switch.
trpzLicenseInfoEntry	1.3.6.1.4.1.14525.4.2.3.2.1		not-accessible	A license table entry.
TRP trpzLicenseInfoEntryFeature	1.3.6.1.4.1.14525.4.2.3.2.1.1	TrpzLicenseFeature	not-accessible	The feature being reported on
INT trpzLicenseInfoEntryValue	1.3.6.1.4.1.14525.4.2.3.2.1.2	INTEGER	read-only	The value of the feature enabled, for example a feature may have multiple levels of licensing, so the value will very with the license level.
STR trpzLicenseInfoEntryDescr	1.3.6.1.4.1.14525.4.2.3.2.1.3	DisplayString	read-only	A human interpretable description of this license, for example, '120 APs or DAPs.'

RFC description

Provides basic system information and object management for Trapeze Networks wireless switches.

Start monitoring Trapeze Networks wireless LAN controller, Access Controller (serial number/firmware-version/mobility-domain status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download TRAPEZE-NETWORKS-BASIC-MIB