All MIBs › BITSTORM-HP-160-MIB
Organization: Zhone
Last Updated: 2006-08-10
Description: Zhone enterprise MIB for the BITSTORM-HP-160 VDSL aggregation unit, covering VDSL line performance, GbE uplinks, ATM/Ethernet traffic, PPPoE, clustering, and alarm traps
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is BITSTORM-HP-160-MIB?
BITSTORM-HP-160-MIB is a Zhone Technologies (enterprise OID 5504, Bitstorm HP-160 IP-DSLAM product) proprietary root MIB reporting DSLAM line-test and alarm status. Its objects cover MIB version, an Ethernet traffic-descriptor config table, system-restart/restart-SNMP-agent actions, line-test result, an alarm-profile table (type ID, mask, level), a current-alarm table (physical/interface index, type ID, level, state, time), and an alarm-log table (sequence ID, physical/interface index, type ID, level). As a status/configuration MIB it lets an administrator confirm DSL line-test results and active alarm state on a Zhone Bitstorm HP-160 IP-DSLAM. It is deployed on Zhone Technologies Bitstorm HP-160 IP-DSLAM equipment. Engineers can download the BITSTORM-HP-160-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in BITSTORM-HP-160-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Zhone Technologies Bitstorm HP-160 IP-DSLAM equipment
Monitoring Examples
An administrator checks BITSTORM-HP-160LineTestResult and BITSTORM-HP-160AlmCurrentTable to confirm DSL line-test results and active alarms on a Zhone Bitstorm HP-160 IP-DSLAM.
What Can Be Monitored
- DSL line-test results and active alarm state
This MIB depends on
Related MIBs
Imported Objects
From ENTITY-MIB
| PhysicalIndex | |
| entPhysicalIndex | OBJECT-TYPE |
From IF-MIB
| InterfaceIndex | |
| ifIndex | OBJECT-TYPE |
From RFC-1212
| OBJECT-TYPE |
From SNMPv2-SMI
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| Unsigned32 | |
| enterprises |
From SNMPv2-TC
| PhysAddress | |
| RowStatus | |
| TAddress | |
| TEXTUAL-CONVENTION | |
| TruthValue |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| org | 1.3 | |||
| dod | 1.3.6 | |||
| internet | 1.3.6.1 | |||
| private | 1.3.6.1.4 | |||
| enterprises | 1.3.6.1.4.1 | |||
| Zhone | 1.3.6.1.4.1.5504 | |||
| bitstormHp160 | 1.3.6.1.4.1.5504.18 | Zhone IP-DSLAM root MIB module. | ||
| OCT bitstormHp160MibVersion | 1.3.6.1.4.1.5504.18.1 | OCTET STRING | read-only | This object value presents that current NE by implementation is compliant to which version the enterprise MIB belongs to. |
| bitstormHp160CfgMgt | 1.3.6.1.4.1.5504.18.2 | |||
| bitstormHp160CfgTime | 1.3.6.1.4.1.5504.18.2.1 | |||
| OCT bitstormHp160SysDate | 1.3.6.1.4.1.5504.18.2.1.1 | OCTET STRING | read-write | System date. Format: YYYY/MM/DD YYYY: Year MM: Month DD: Day 03/04/2005 is equivalent to 3/4/2005. |
| OCT bitstormHp160SysTime | 1.3.6.1.4.1.5504.18.2.1.2 | OCTET STRING | read-write | System time. Format: hh:mm:ss hh: hour mm: minute ss: second Use pattern like 13:03:02 instead of 13:3:2 |
| bitstormHp160SNTP | 1.3.6.1.4.1.5504.18.2.1.3 | |||
| OCT bitstormHp160SNTPTimeZone | 1.3.6.1.4.1.5504.18.2.1.3.1 | OCTET STRING | read-write | This command is used to set the time zone. The CCT is +8 relative to Greenwich mean time (GMT). This field change will probably end up with time change too. |
| I32 bitstormHp160SNTPPollingInterval | 1.3.6.1.4.1.5504.18.2.1.3.2 | Integer32 | read-write | This command sets the SNTP client to automatically send a time synchronization request (specific to the mode) to the network at a specific interval. If the poll-interval is set to 0, the polling mechanism will be disabled. |
| ADR bitstormHp160SNTPServerIP | 1.3.6.1.4.1.5504.18.2.1.3.3 | TAddress | read-write | This command is used to set the dedicated unicast server ipaddress for the SNTP client. |
| INT bitstormHp160SNTPSynchronize | 1.3.6.1.4.1.5504.18.2.1.3.4 | INTEGER | read-write | Always use active(1) to do SNTP Synchronization. |
| bitstormHp160CfgAddress | 1.3.6.1.4.1.5504.18.2.2 | |||
| bitstormHp160CfgInband | 1.3.6.1.4.1.5504.18.2.2.1 | |||
| ADR bitstormHp160CfgInbandIPAddress | 1.3.6.1.4.1.5504.18.2.2.1.1 | TAddress | read-write | This field change will probably disconnect the current link. |
| ADR bitstormHp160CfgInbandSubnetMask | 1.3.6.1.4.1.5504.18.2.2.1.2 | TAddress | read-write | This field change will probably disconnect the current link. |
| ADR bitstormHp160CfgInbandMACAddress | 1.3.6.1.4.1.5504.18.2.2.1.3 | TAddress | read-only | This field can't be changed. |
| I32 bitstormHp160CfgInbandManageVlanId | 1.3.6.1.4.1.5504.18.2.2.1.4 | Integer32 | read-write | |
| I32 bitstormHp160CfgInbandManagePriority | 1.3.6.1.4.1.5504.18.2.2.1.5 | Integer32 | read-write | |
| bitstormHp160CfgOutband | 1.3.6.1.4.1.5504.18.2.2.2 | |||
| ADR bitstormHp160CfgOutbandIPAddress | 1.3.6.1.4.1.5504.18.2.2.2.1 | TAddress | read-write | This field change will probably disconnect the current link. |
| ADR bitstormHp160CfgOutbandSubnetMask | 1.3.6.1.4.1.5504.18.2.2.2.2 | TAddress | read-write | This field change will probably disconnect the current link. |
| bitstormHp160CfgInbandRouteTable | 1.3.6.1.4.1.5504.18.2.2.3 | not-accessible | The Inband Route table. | |
| bitstormHp160CfgInbandRouteEntry | 1.3.6.1.4.1.5504.18.2.2.3.1 | not-accessible | An Entry in the bitstormHp160CfgInbandRouteTable. | |
| I32 bitstormHp160CfgInbandRouteIndex | 1.3.6.1.4.1.5504.18.2.2.3.1.1 | Integer32 | not-accessible | Inband Route Index. |
| IP bitstormHp160CfgInbandRouteDstIp | 1.3.6.1.4.1.5504.18.2.2.3.1.2 | IpAddress | read-create | Inband Route Dst IP. |
| IP bitstormHp160CfgInbandRouteNetmask | 1.3.6.1.4.1.5504.18.2.2.3.1.3 | IpAddress | read-create | Inband Route Netmask. |
| IP bitstormHp160CfgInbandRouteGateway | 1.3.6.1.4.1.5504.18.2.2.3.1.4 | IpAddress | read-create | Inband Route Gateway. |
| ROW bitstormHp160CfgInbandRouteRowStatus | 1.3.6.1.4.1.5504.18.2.2.3.1.5 | RowStatus | read-create | RowStatus. |
| ADR bitstormHp160CfgOutbandDefaultGateway | 1.3.6.1.4.1.5504.18.2.2.4 | TAddress | read-write | This field change will probably disconnect the current link. |
| bitstormHp160CfgOutbandRouteTable | 1.3.6.1.4.1.5504.18.2.2.5 | not-accessible | The Outband Route table. | |
| bitstormHp160CfgOutbandRouteEntry | 1.3.6.1.4.1.5504.18.2.2.5.1 | not-accessible | An Entry Out the bitstormHp160CfgOutbandRouteTable. | |
| I32 bitstormHp160CfgOutbandRouteIndex | 1.3.6.1.4.1.5504.18.2.2.5.1.1 | Integer32 | not-accessible | Outband Route Index. |
| IP bitstormHp160CfgOutbandRouteDstIp | 1.3.6.1.4.1.5504.18.2.2.5.1.2 | IpAddress | read-create | Outband Route Dst IP. |
| IP bitstormHp160CfgOutbandRouteNetmask | 1.3.6.1.4.1.5504.18.2.2.5.1.3 | IpAddress | read-create | Outband Route Netmask. |
| IP bitstormHp160CfgOutbandRouteGateway | 1.3.6.1.4.1.5504.18.2.2.5.1.4 | IpAddress | read-create | Outband Route Gateway. |
| ROW bitstormHp160CfgOutbandRouteRowStatus | 1.3.6.1.4.1.5504.18.2.2.5.1.5 | RowStatus | read-create | RowStatus. |
| bitstormHp160CfgPhy | 1.3.6.1.4.1.5504.18.2.3 | |||
| bitstormHp160CfgPhyEnetTable | 1.3.6.1.4.1.5504.18.2.3.1 | not-accessible | ||
| bitstormHp160CfgPhyEnetEntry | 1.3.6.1.4.1.5504.18.2.3.1.1 | not-accessible | ||
| I32 bitstormHp160PhyEnetPortIndex | 1.3.6.1.4.1.5504.18.2.3.1.1.1 | Integer32 | read-only | |
| INT bitstormHp160PhyEnetMode | 1.3.6.1.4.1.5504.18.2.3.1.1.2 | INTEGER | read-write | |
| INT bitstormHp160PhyEnetLinkStatus | 1.3.6.1.4.1.5504.18.2.3.1.1.3 | INTEGER | read-only | |
| INT bitstormHp160PhyEnetCopperFiberSelect | 1.3.6.1.4.1.5504.18.2.3.1.1.4 | INTEGER | read-write | |
| INT bitstormHp160PhyEnetCopperFiberStatus | 1.3.6.1.4.1.5504.18.2.3.1.1.5 | INTEGER | read-only | |
| bitstormHp160CfgBridge | 1.3.6.1.4.1.5504.18.2.4 | |||
| bitstormHp160BridgePortTable | 1.3.6.1.4.1.5504.18.2.4.1 | not-accessible | ||
| bitstormHp160BridgePortEntry | 1.3.6.1.4.1.5504.18.2.4.1.1 | not-accessible | ||
| NUM bitstormHp160BridgePortIfcIndex | 1.3.6.1.4.1.5504.18.2.4.1.1.1 | InterfaceIndex | read-only | |
| I32 bitstormHp160BridgePortDefaultVlan | 1.3.6.1.4.1.5504.18.2.4.1.1.2 | Integer32 | read-create | |
| I32 bitstormHp160BridgePortVlanPriority | 1.3.6.1.4.1.5504.18.2.4.1.1.3 | Integer32 | read-create | |
| INT bitstormHp160BridgePortDefaultVlanTagging | 1.3.6.1.4.1.5504.18.2.4.1.1.4 | INTEGER | read-create | |
| INT bitstormHp160BridgePortVpmtMode | 1.3.6.1.4.1.5504.18.2.4.1.1.5 | INTEGER | read-create | |
| INT bitstormHp160BridgePortnodeLinkAggrMode | 1.3.6.1.4.1.5504.18.2.4.1.1.6 | INTEGER | read-create | |
| INT bitstormHp160BridgePortIngressMode | 1.3.6.1.4.1.5504.18.2.4.1.1.7 | INTEGER | read-create | |
| INT bitstormHp160BridgePortLinkMode | 1.3.6.1.4.1.5504.18.2.4.1.1.8 | INTEGER | read-create | |
| I32 bitstormHp160BridgePortMaxMac | 1.3.6.1.4.1.5504.18.2.4.1.1.10 | Integer32 | read-create | |
| INT bitstormHp160BridgePortAcceptableFrameType | 1.3.6.1.4.1.5504.18.2.4.1.1.11 | INTEGER | read-create | |
| INT bitstormHp160BridgePortIsolationMode | 1.3.6.1.4.1.5504.18.2.4.1.1.12 | INTEGER | read-create | |
| ROW bitstormHp160BridgePortRowStatus | 1.3.6.1.4.1.5504.18.2.4.1.1.13 | RowStatus | read-create | |
| bitstormHp160CfgVlanGroup | 1.3.6.1.4.1.5504.18.2.4.2 | |||
| bitstormHp160CfgBridgeMemberSetTable | 1.3.6.1.4.1.5504.18.2.4.2.1 | not-accessible | ||
| bitstormHp160CfgBridgeMemberSetEntry | 1.3.6.1.4.1.5504.18.2.4.2.1.1 | not-accessible | the ports for a specific VLAN | |
| I32 bitstormHp160CfgBridgeMemberSetVlanId | 1.3.6.1.4.1.5504.18.2.4.2.1.1.1 | Integer32 | read-only | The identity of MemberSet. |
| POR bitstormHp160CfgBridgeMemberSetEgressPorts | 1.3.6.1.4.1.5504.18.2.4.2.1.1.2 | PortList | read-create | 28 Bytes for bridge port 0~219. |
| POR bitstormHp160CfgBridgeMemberSetUntaggedPorts | 1.3.6.1.4.1.5504.18.2.4.2.1.1.3 | PortList | read-create | 28 Bytes for bridge port 0~219. |
| POR bitstormHp160CfgBridgeMemberSetIsolationPorts | 1.3.6.1.4.1.5504.18.2.4.2.1.1.4 | PortList | read-create | 28 Bytes for bridge port 0~219. |
| POR bitstormHp160CfgBridgeMemberSetDefaultPorts | 1.3.6.1.4.1.5504.18.2.4.2.1.1.5 | PortList | read-only | 28 Bytes for bridge port 0~219. |
| ROW bitstormHp160CfgBridgeMemberSetRowStatus | 1.3.6.1.4.1.5504.18.2.4.2.1.1.6 | RowStatus | read-create | |
| bitstormHp160CfgBridgeVlanListTable | 1.3.6.1.4.1.5504.18.2.4.2.2 | not-accessible | ||
| bitstormHp160CfgBridgeVlanListEntry | 1.3.6.1.4.1.5504.18.2.4.2.2.1 | not-accessible | the VLANs for a specific port | |
| I32 bitstormHp160CfgBridgeVlanListPortIndex | 1.3.6.1.4.1.5504.18.2.4.2.2.1.1 | Integer32 | read-only | The identity of VlanList. |
| OCT bitstormHp160CfgBridgeVlanListVIDs | 1.3.6.1.4.1.5504.18.2.4.2.2.1.2 | OCTET STRING | read-only | |
| bitstormHp160CfgBridgeTpFdbTable | 1.3.6.1.4.1.5504.18.2.4.2.3 | not-accessible | A table containing filtering information for Unicast MAC addresses for each Filtering Database, configured into the device by (local or network) management specifying the set of ports to which frames received from specific ports and containing specific unicast destination addresses are allowed to be forwarded. A value of zero in this table as the port number from which frames with a specific destination address are received, is used to specify all ports for which there is no specific entry in this table for that particular destination address. Entries are valid for unicast addresses only. | |
| bitstormHp160CfgBridgeTpFdbEntry | 1.3.6.1.4.1.5504.18.2.4.2.3.1 | not-accessible | Filtering information configured into the device by (local or network) management specifying the set of ports to which frames received from a specific port and containing a specific unicast destination address are allowed to be forwarded. | |
| U32 bitstormHp160CfgBridgeTpFdbId | 1.3.6.1.4.1.5504.18.2.4.2.3.1.1 | Unsigned32 | read-only | The identity of this Filtering Database. |
| PHY bitstormHp160CfgBridgeTpFdbMacAddress | 1.3.6.1.4.1.5504.18.2.4.2.3.1.2 | PhysAddress | read-only | The destination MAC address in a frame to which this entry's filtering information applies. This object must take the value of a unicast address. |
| I32 bitstormHp160CfgBridgeTpFdbReceivePort | 1.3.6.1.4.1.5504.18.2.4.2.3.1.3 | Integer32 | read-only | Either the value '0', or the port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of zero indicates that this entry applies on all ports of the device for which there is no other applicable entry. |
| I32 bitstormHp160CfgBridgeTpFdbVlan | 1.3.6.1.4.1.5504.18.2.4.2.3.1.4 | Integer32 | read-only | |
| INT bitstormHp160CfgBridgeTpFdbStatus | 1.3.6.1.4.1.5504.18.2.4.2.3.1.5 | INTEGER | read-only | |
| INT bitstormHp160CfgBridgeTpFdbAgingBit | 1.3.6.1.4.1.5504.18.2.4.2.3.1.6 | INTEGER | read-only | |
| INT bitstormHp160CfgBridgeTpFdbProcessMode | 1.3.6.1.4.1.5504.18.2.4.2.3.1.7 | INTEGER | read-only | |
| INT bitstormHp160CfgBridgeTpFdbUnknownMacMode | 1.3.6.1.4.1.5504.18.2.4.2.3.1.8 | INTEGER | read-only | |
| bitstormHp160CfgBridgeFdbStaticTable | 1.3.6.1.4.1.5504.18.2.4.2.4 | not-accessible | A table containing filtering information for Multicast and Broadcast MAC addresses for each VLAN, configured into the device by (local or network) management specifying the set of ports to which frames received from specific ports and containing specific Multicast and Broadcast destination addresses are allowed to be forwarded. A value of zero in this table as the port number from which frames with a specific destination address are received, is used to specify all ports for which there is no specific entry in this table for that particular destination address. Entries are valid for Multicast and Broadcast addresses only. | |
| bitstormHp160CfgBridgeFdbStaticEntry | 1.3.6.1.4.1.5504.18.2.4.2.4.1 | not-accessible | Filtering information configured into the device by (local or network) management specifying the set of ports to which frames received from this specific port for this VLAN and containing this Multicast or Broadcast destination address are allowed to be forwarded. | |
| U32 bitstormHp160CfgBridgeFdbStaticId | 1.3.6.1.4.1.5504.18.2.4.2.4.1.1 | Unsigned32 | read-only | The identity of this Filtering Database. |
| OCT bitstormHp160CfgBridgeFdbStaticAddress | 1.3.6.1.4.1.5504.18.2.4.2.4.1.2 | OCTET STRING | read-create | The destination MAC address in a frame to which this entry's filtering information applies. This object must take the value of a Multicast or Broadcast address. |
| I32 bitstormHp160CfgBridgeFdbStaticOutPort | 1.3.6.1.4.1.5504.18.2.4.2.4.1.3 | Integer32 | read-create | Either the value '0', or the port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of zero indicates that this entry applies on all ports of the device for which there is no other applicable entry. |
| I32 bitstormHp160CfgBridgeFdbStaticVlan | 1.3.6.1.4.1.5504.18.2.4.2.4.1.4 | Integer32 | read-create | |
| INT bitstormHp160CfgBridgeFdbStaticrProcessMode | 1.3.6.1.4.1.5504.18.2.4.2.4.1.5 | INTEGER | read-create | |
| ROW bitstormHp160CfgBridgeFdbStaticrRowStatus | 1.3.6.1.4.1.5504.18.2.4.2.4.1.6 | RowStatus | read-create | The status of this bitstormHp160CfgBridgeFdbStaticEntry entry. |
| bitstormHp160CfgRateLimitGroup | 1.3.6.1.4.1.5504.18.2.4.2.6 | |||
| bitstormHp160McBcRateLimitTable | 1.3.6.1.4.1.5504.18.2.4.2.6.1 | not-accessible | ||
| bitstormHp160McBcRateLimitEntry | 1.3.6.1.4.1.5504.18.2.4.2.6.1.1 | not-accessible | ||
| I32 bitstormHp160McBcRateLimitVlanId | 1.3.6.1.4.1.5504.18.2.4.2.6.1.1.1 | Integer32 | read-only | |
| U32 bitstormHp160McBcRateLimitCIR | 1.3.6.1.4.1.5504.18.2.4.2.6.1.1.2 | Unsigned32 | read-create | |
| U32 bitstormHp160McBcRateLimitLbSl | 1.3.6.1.4.1.5504.18.2.4.2.6.1.1.3 | Unsigned32 | read-create | |
| ROW bitstormHp160McBcRateLimitRowStatus | 1.3.6.1.4.1.5504.18.2.4.2.6.1.1.4 | RowStatus | read-create | |
| bitstormHp160McFldRateLimitTable | 1.3.6.1.4.1.5504.18.2.4.2.6.2 | not-accessible | ||
| bitstormHp160McFldRateLimitEntry | 1.3.6.1.4.1.5504.18.2.4.2.6.2.1 | not-accessible | ||
| I32 bitstormHp160McFldRateLimitVlanId | 1.3.6.1.4.1.5504.18.2.4.2.6.2.1.1 | Integer32 | read-only | |
| U32 bitstormHp160McFldRateLimitCIR | 1.3.6.1.4.1.5504.18.2.4.2.6.2.1.2 | Unsigned32 | read-create | |
| U32 bitstormHp160McFldRateLimitLbSl | 1.3.6.1.4.1.5504.18.2.4.2.6.2.1.3 | Unsigned32 | read-create | |
| ROW bitstormHp160McFldRateLimitRowStatus | 1.3.6.1.4.1.5504.18.2.4.2.6.2.1.4 | RowStatus | read-create | |
| bitstormHp160IwPolicerTable | 1.3.6.1.4.1.5504.18.2.4.2.6.3 | not-accessible | ||
| bitstormHp160IwpolicerEntry | 1.3.6.1.4.1.5504.18.2.4.2.6.3.1 | not-accessible | ||
| I32 bitstormHp160IwPolicerIndex | 1.3.6.1.4.1.5504.18.2.4.2.6.3.1.1 | Integer32 | not-accessible | |
| U32 bitstormHp160IwPolicerCIR | 1.3.6.1.4.1.5504.18.2.4.2.6.3.1.2 | Unsigned32 | read-create | |
| U32 bitstormHp160IwPolicerLbSl | 1.3.6.1.4.1.5504.18.2.4.2.6.3.1.3 | Unsigned32 | read-create | |
| ROW bitstormHp160IwPolicerRowStatus | 1.3.6.1.4.1.5504.18.2.4.2.6.3.1.4 | RowStatus | read-create | |
| INT bitstormHp160IwPolicerUsedCount | 1.3.6.1.4.1.5504.18.2.4.2.6.3.1.5 | INTEGER | read-only | The value is not zero means the profile is in used,then the profile can't be delete. |
| bitstormHp160BportRateLimitTable | 1.3.6.1.4.1.5504.18.2.4.2.6.4 | not-accessible | ||
| bitstormHp160BportRateLimitEntry | 1.3.6.1.4.1.5504.18.2.4.2.6.4.1 | not-accessible | ||
| I32 bitstormHp160BportIfcIndex | 1.3.6.1.4.1.5504.18.2.4.2.6.4.1.1 | Integer32 | not-accessible | |
| U32 bitstormHp160BportRateLimitEgressIwPolicerIdx | 1.3.6.1.4.1.5504.18.2.4.2.6.4.1.2 | Unsigned32 | read-write | |
| U32 bitstormHp160BportRateLimitIngressIwPolicerIdx | 1.3.6.1.4.1.5504.18.2.4.2.6.4.1.3 | Unsigned32 | read-write | |
| bitstormHp160BportVlanRateLimitTable | 1.3.6.1.4.1.5504.18.2.4.2.6.5 | not-accessible | ||
| bitstormHp160BportVlanRateLimitEntry | 1.3.6.1.4.1.5504.18.2.4.2.6.5.1 | not-accessible | ||
| I32 bitstormHp160BportVlanRateLimitIndex | 1.3.6.1.4.1.5504.18.2.4.2.6.5.1.1 | Integer32 | not-accessible | |
| U32 bitstormHp160BportVlanRateLimitEgressIwPolicerIdx | 1.3.6.1.4.1.5504.18.2.4.2.6.5.1.2 | Unsigned32 | read-create | |
| U32 bitstormHp160BportVlanRateLimitIngressIwPolicerIdx | 1.3.6.1.4.1.5504.18.2.4.2.6.5.1.3 | Unsigned32 | read-create | |
| U32 bitstormHp160BportVlanRateLimitVlanId | 1.3.6.1.4.1.5504.18.2.4.2.6.5.1.4 | Unsigned32 | read-create | |
| U32 bitstormHp160BportVlanRateLimitIfcIndex | 1.3.6.1.4.1.5504.18.2.4.2.6.5.1.5 | Unsigned32 | read-create | |
| ROW bitstormHp160BportVlanRateLimitRowStatus | 1.3.6.1.4.1.5504.18.2.4.2.6.5.1.6 | RowStatus | read-create | |
| bitstormHp160BportPortBcRateLimitTable | 1.3.6.1.4.1.5504.18.2.4.2.6.6 | not-accessible | ||
| bitstormHp160BportPortBcRateLimitEntry | 1.3.6.1.4.1.5504.18.2.4.2.6.6.1 | not-accessible | ||
| I32 bitstormHp160bcRateBridgePortIfcIndex | 1.3.6.1.4.1.5504.18.2.4.2.6.6.1.1 | Integer32 | not-accessible | |
| I32 bitstormHp160bcRateLimitIngressIwPolicerIdx | 1.3.6.1.4.1.5504.18.2.4.2.6.6.1.2 | Integer32 | read-write | |
| bitstormHp160CfgVlanPriorityGroup | 1.3.6.1.4.1.5504.18.2.4.2.7 | |||
| bitstormHp160CfgBridgeTosVpmtFilterTable | 1.3.6.1.4.1.5504.18.2.4.2.7.1 | not-accessible | The TOS filter configuration table. | |
| bitstormHp160CfgBridgeTosVpmtFilterEntry | 1.3.6.1.4.1.5504.18.2.4.2.7.1.1 | not-accessible | An Entry in the bitstormHp160CfgBridgeTosVpmtFilterTable | |
| I32 bitstormHp160CfgBridgeTosVpmtFilterIndex | 1.3.6.1.4.1.5504.18.2.4.2.7.1.1.1 | Integer32 | read-only | |
| NUM bitstormHp160CfgBridgeTosVpmtFilterInputBridgePort | 1.3.6.1.4.1.5504.18.2.4.2.7.1.1.2 | InterfaceIndex | read-create | |
| I32 bitstormHp160CfgBridgeTosVpmtFilterIncomingTos | 1.3.6.1.4.1.5504.18.2.4.2.7.1.1.3 | Integer32 | read-create | |
| I32 bitstormHp160CfgBridgeTosVpmtFilterOutgoingVlanPriority | 1.3.6.1.4.1.5504.18.2.4.2.7.1.1.4 | Integer32 | read-create | |
| ROW bitstormHp160CfgBridgeTosVpmtFilterRowStatus | 1.3.6.1.4.1.5504.18.2.4.2.7.1.1.5 | RowStatus | read-create | |
| bitstormHp160CfgBridgeDSVpmtFilterTable | 1.3.6.1.4.1.5504.18.2.4.2.7.2 | not-accessible | The DS filter configuration table. | |
| bitstormHp160CfgBridgeDSVpmtFilterEntry | 1.3.6.1.4.1.5504.18.2.4.2.7.2.1 | not-accessible | An Entry in the bitstormHp160CfgBridgeDSVpmtFilterTable | |
| I32 bitstormHp160CfgBridgeDSVpmtFilterIndex | 1.3.6.1.4.1.5504.18.2.4.2.7.2.1.1 | Integer32 | read-only | |
| NUM bitstormHp160CfgBridgeDSVpmtFilterInputBridgePort | 1.3.6.1.4.1.5504.18.2.4.2.7.2.1.2 | InterfaceIndex | read-create | |
| INT bitstormHp160CfgBridgeDSVpmtFilterIncomingDS | 1.3.6.1.4.1.5504.18.2.4.2.7.2.1.3 | INTEGER | read-create | DIFFSERV-dEFAULT(0) DIFFSERV-aF11(10) DIFFSERV-aF12(12) DIFFSERV-aF13(14) DIFFSERV-aF21(18) DIFFSERV-aF22(20) DIFFSERV-aF23(22) DIFFSERV-aF31(26) DIFFSERV-aF32(28) DIFFSERV-aF33(30) DIFFSERV-aF41(34) DIFFSERV-aF42(36) DIFFSERV-aF43(38) DIFFSERV-eF(46) |
| I32 bitstormHp160CfgBridgeDSVpmtFilterOutgoingVlanPriority | 1.3.6.1.4.1.5504.18.2.4.2.7.2.1.4 | Integer32 | read-create | |
| ROW bitstormHp160CfgBridgeDSVpmtFilterRowStatus | 1.3.6.1.4.1.5504.18.2.4.2.7.2.1.5 | RowStatus | read-create | |
| bitstormHp160CfgBridgeIpSrcVpmtFilterTable | 1.3.6.1.4.1.5504.18.2.4.2.7.3 | not-accessible | The IP src filter configuration table. | |
| bitstormHp160CfgBridgeIpSrcVpmtFilterEntry | 1.3.6.1.4.1.5504.18.2.4.2.7.3.1 | not-accessible | An Entry in the bitstormHp160CfgBridgeIpSrcVpmtFilterTable | |
| I32 bitstormHp160CfgBridgeIpSrcVpmtFilterIndex | 1.3.6.1.4.1.5504.18.2.4.2.7.3.1.1 | Integer32 | read-only | |
| NUM bitstormHp160CfgBridgeIpSrcVpmtFilterInputBridgePort | 1.3.6.1.4.1.5504.18.2.4.2.7.3.1.2 | InterfaceIndex | read-create | |
| IP bitstormHp160CfgBridgeIpSrcVpmtFilterIncomingIpsrcstart | 1.3.6.1.4.1.5504.18.2.4.2.7.3.1.3 | IpAddress | read-create | |
| IP bitstormHp160CfgBridgeIpSrcVpmtFilterIncomingIpsrcend | 1.3.6.1.4.1.5504.18.2.4.2.7.3.1.4 | IpAddress | read-create | |
| I32 bitstormHp160CfgBridgeIpSrcVpmtFilterOutgoingVlanPriority | 1.3.6.1.4.1.5504.18.2.4.2.7.3.1.5 | Integer32 | read-create | |
| ROW bitstormHp160CfgBridgeIpSrcVpmtFilterRowStatus | 1.3.6.1.4.1.5504.18.2.4.2.7.3.1.6 | RowStatus | read-create | |
| bitstormHp160CfgBridgeIpDstVpmtFilterTable | 1.3.6.1.4.1.5504.18.2.4.2.7.4 | not-accessible | The IP dst filter configuration table. | |
| bitstormHp160CfgBridgeIpDstVpmtFilterEntry | 1.3.6.1.4.1.5504.18.2.4.2.7.4.1 | not-accessible | An Entry in the bitstormHp160CfgBridgeIpDstVpmtFilterTable | |
| I32 bitstormHp160CfgBridgeIpDstVpmtFilterIndex | 1.3.6.1.4.1.5504.18.2.4.2.7.4.1.1 | Integer32 | read-only | |
| NUM bitstormHp160CfgBridgeIpDstVpmtFilterInputBridgePort | 1.3.6.1.4.1.5504.18.2.4.2.7.4.1.2 | InterfaceIndex | read-create | |
| IP bitstormHp160CfgBridgeIpDstVpmtFilterIncomingIpDststart | 1.3.6.1.4.1.5504.18.2.4.2.7.4.1.3 | IpAddress | read-create | |
| IP bitstormHp160CfgBridgeIpDstVpmtFilterIncomingIpDstend | 1.3.6.1.4.1.5504.18.2.4.2.7.4.1.4 | IpAddress | read-create | |
| I32 bitstormHp160CfgBridgeIpDstVpmtFilterOutgoingVlanPriority | 1.3.6.1.4.1.5504.18.2.4.2.7.4.1.5 | Integer32 | read-create | |
| ROW bitstormHp160CfgBridgeIpDstVpmtFilterRowStatus | 1.3.6.1.4.1.5504.18.2.4.2.7.4.1.6 | RowStatus | read-create | |
| bitstormHp160CfgBridgeMacSrcVpmtFilterTable | 1.3.6.1.4.1.5504.18.2.4.2.7.5 | not-accessible | The MAC src filter configuration table. | |
| bitstormHp160CfgBridgeMacSrcVpmtFilterEntry | 1.3.6.1.4.1.5504.18.2.4.2.7.5.1 | not-accessible | An Entry in the bitstormHp160CfgBridgeMacSrcVpmtFilterTable | |
| I32 bitstormHp160CfgBridgeMacSrcVpmtFilterIndex | 1.3.6.1.4.1.5504.18.2.4.2.7.5.1.1 | Integer32 | read-only | |
| NUM bitstormHp160CfgBridgeMacSrcVpmtFilterInputBridgePort | 1.3.6.1.4.1.5504.18.2.4.2.7.5.1.2 | InterfaceIndex | read-create | |
| PHY bitstormHp160CfgBridgeMacSrcVpmtFilterIncomingMacsrc | 1.3.6.1.4.1.5504.18.2.4.2.7.5.1.3 | PhysAddress | read-create | |
| I32 bitstormHp160CfgBridgeMacSrcVpmtFilterOutgoingVlanPriority | 1.3.6.1.4.1.5504.18.2.4.2.7.5.1.4 | Integer32 | read-create | |
| ROW bitstormHp160CfgBridgeMacSrcVpmtFilterRowStatus | 1.3.6.1.4.1.5504.18.2.4.2.7.5.1.5 | RowStatus | read-create | |
| bitstormHp160CfgBridgeMacDstVpmtFilterTable | 1.3.6.1.4.1.5504.18.2.4.2.7.6 | not-accessible | The MAC dst filter configuration table. | |
| bitstormHp160CfgBridgeMacDstVpmtFilterEntry | 1.3.6.1.4.1.5504.18.2.4.2.7.6.1 | not-accessible | An Entry in the bitstormHp160CfgBridgeMacDstVpmtFilterTable | |
| I32 bitstormHp160CfgBridgeMacDstVpmtFilterIndex | 1.3.6.1.4.1.5504.18.2.4.2.7.6.1.1 | Integer32 | read-only | |
| NUM bitstormHp160CfgBridgeMacDstVpmtFilterInputBridgePort | 1.3.6.1.4.1.5504.18.2.4.2.7.6.1.2 | InterfaceIndex | read-create | |
| PHY bitstormHp160CfgBridgeMacDstVpmtFilterIncomingMacDst | 1.3.6.1.4.1.5504.18.2.4.2.7.6.1.3 | PhysAddress | read-create | |
| I32 bitstormHp160CfgBridgeMacDstVpmtFilterOutgoingVlanPriority | 1.3.6.1.4.1.5504.18.2.4.2.7.6.1.4 | Integer32 | read-create | |
| ROW bitstormHp160CfgBridgeMacDstVpmtFilterRowStatus | 1.3.6.1.4.1.5504.18.2.4.2.7.6.1.5 | RowStatus | read-create | |
| bitstormHp160CfgBridgeVlanIdVpmtFilterTable | 1.3.6.1.4.1.5504.18.2.4.2.7.7 | not-accessible | The Vlan ID filter configuration table. | |
| bitstormHp160CfgBridgeVlanIdVpmtFilterEntry | 1.3.6.1.4.1.5504.18.2.4.2.7.7.1 | not-accessible | An Entry in the bitstormHp160CfgBridgeVlanIdVpmtFilterTable | |
| I32 bitstormHp160CfgBridgeVlanIdVpmtFilterIndex | 1.3.6.1.4.1.5504.18.2.4.2.7.7.1.1 | Integer32 | read-only | |
| NUM bitstormHp160CfgBridgeVlanIdVpmtFilterInputBridgePort | 1.3.6.1.4.1.5504.18.2.4.2.7.7.1.2 | InterfaceIndex | read-create | |
| I32 bitstormHp160CfgBridgeVlanIdVpmtFilterIncomingVlanid | 1.3.6.1.4.1.5504.18.2.4.2.7.7.1.3 | Integer32 | read-create | |
| I32 bitstormHp160CfgBridgeVlanIdVpmtFilterOutgoingVlanPriority | 1.3.6.1.4.1.5504.18.2.4.2.7.7.1.4 | Integer32 | read-create | |
| ROW bitstormHp160CfgBridgeVlanIdVpmtFilterRowStatus | 1.3.6.1.4.1.5504.18.2.4.2.7.7.1.5 | RowStatus | read-create | |
| bitstormHp160CfgBridgePrioTagFilterTable | 1.3.6.1.4.1.5504.18.2.4.2.7.8 | not-accessible | ||
| bitstormHp160CfgBridgePrioTagFilterEntry | 1.3.6.1.4.1.5504.18.2.4.2.7.8.1 | not-accessible | ||
| I32 bitstormHp160BridgePrioTagFilterIndex | 1.3.6.1.4.1.5504.18.2.4.2.7.8.1.1 | Integer32 | read-only | |
| NUM bitstormHp160BridgePrioTagInputBridgePort | 1.3.6.1.4.1.5504.18.2.4.2.7.8.1.2 | InterfaceIndex | read-create | |
| I32 bitstormHp160BridgePrioTagOutgoingVlanPriority | 1.3.6.1.4.1.5504.18.2.4.2.7.8.1.3 | Integer32 | read-create | |
| I32 bitstormHp160BridgePrioTagIncomingVlanPriority | 1.3.6.1.4.1.5504.18.2.4.2.7.8.1.4 | Integer32 | read-create | |
| ROW bitstormHp160BridgePrioTagFilterRowStatus | 1.3.6.1.4.1.5504.18.2.4.2.7.8.1.5 | RowStatus | read-create | |
| bitstormHp160BportVlanTranslationTable | 1.3.6.1.4.1.5504.18.2.4.2.8 | not-accessible | ||
| bitstormHp160BportVlanTranslationEntry | 1.3.6.1.4.1.5504.18.2.4.2.8.1 | not-accessible | ||
| I32 bitstormHp160BportVlanTranslationIndex | 1.3.6.1.4.1.5504.18.2.4.2.8.1.1 | Integer32 | not-accessible | |
| I32 bitstormHp160BportVlanTranslationUserPort | 1.3.6.1.4.1.5504.18.2.4.2.8.1.2 | Integer32 | read-create | |
| I32 bitstormHp160BportVlanTranslationUserVlanId | 1.3.6.1.4.1.5504.18.2.4.2.8.1.3 | Integer32 | read-create | |
| I32 bitstormHp160BportVlanTranslationUplinkPort | 1.3.6.1.4.1.5504.18.2.4.2.8.1.4 | Integer32 | read-create | |
| I32 bitstormHp160BportVlanTranslationUplinkVlanId | 1.3.6.1.4.1.5504.18.2.4.2.8.1.5 | Integer32 | read-create | |
| I32 bitstormHp160BportVlanTranslationUplinkPriority | 1.3.6.1.4.1.5504.18.2.4.2.8.1.6 | Integer32 | read-create | |
| ROW bitstormHp160BportVlanTranslationRowStatus | 1.3.6.1.4.1.5504.18.2.4.2.8.1.7 | RowStatus | read-create | |
| bitstormHp160CfgFilterGroup | 1.3.6.1.4.1.5504.18.2.4.3 | |||
| bitstormHp160CfgBridgeProtocolFilterTable | 1.3.6.1.4.1.5504.18.2.4.3.1 | not-accessible | The Protocol filter configuration table. | |
| bitstormHp160CfgBridgeProtocolFilterEntry | 1.3.6.1.4.1.5504.18.2.4.3.1.1 | not-accessible | An Entry in the bitstormHp160CfgBridgeProtocolFilterTable | |
| I32 bitstormHp160CfgBridgeProtocolFilterIndex | 1.3.6.1.4.1.5504.18.2.4.3.1.1.1 | Integer32 | read-only | |
| NUM bitstormHp160CfgBridgeProtocolFilterInputBridgePort | 1.3.6.1.4.1.5504.18.2.4.3.1.1.2 | InterfaceIndex | read-create | |
| INT bitstormHp160CfgBridgeProtocolFilter | 1.3.6.1.4.1.5504.18.2.4.3.1.1.3 | INTEGER | read-create | |
| ROW bitstormHp160CfgBridgeProtocolFilterRowStatus | 1.3.6.1.4.1.5504.18.2.4.3.1.1.4 | RowStatus | read-create | |
| bitstormHp160CfgBridgeL4DstPortFilterTable | 1.3.6.1.4.1.5504.18.2.4.3.2 | not-accessible | The L4 dst filter configuration table. | |
| bitstormHp160CfgBridgeL4DstPortFilterEntry | 1.3.6.1.4.1.5504.18.2.4.3.2.1 | not-accessible | An Entry in the bitstormHp160CfgBridgeL4DstPortFilterTable | |
| I32 bitstormHp160CfgBridgeL4DstPortFilterIndex | 1.3.6.1.4.1.5504.18.2.4.3.2.1.1 | Integer32 | read-only | |
| NUM bitstormHp160CfgBridgeL4DstPortFilterInputBridgePort | 1.3.6.1.4.1.5504.18.2.4.3.2.1.2 | InterfaceIndex | read-create | |
| I32 bitstormHp160CfgBridgeL4DstPortFilterDestinationPort | 1.3.6.1.4.1.5504.18.2.4.3.2.1.3 | Integer32 | read-create | |
| ROW bitstormHp160CfgBridgeL4DstPortFilterRowStatus | 1.3.6.1.4.1.5504.18.2.4.3.2.1.4 | RowStatus | read-create | |
| bitstormHp160CfgBridgeSrcMacFilterTable | 1.3.6.1.4.1.5504.18.2.4.3.3 | not-accessible | ||
| bitstormHp160CfgBridgeSrcMacFilterEntry | 1.3.6.1.4.1.5504.18.2.4.3.3.1 | not-accessible | ||
| I32 bitstormHp160BridgeSrcMacFilterIndex | 1.3.6.1.4.1.5504.18.2.4.3.3.1.1 | Integer32 | read-only | |
| NUM bitstormHp160BridgeSrcMacFilterBpIndex | 1.3.6.1.4.1.5504.18.2.4.3.3.1.2 | InterfaceIndex | read-create | |
| PHY bitstormHp160BridgeSrcMacFilterSrcMac | 1.3.6.1.4.1.5504.18.2.4.3.3.1.3 | PhysAddress | read-create | |
| ROW bitstormHp160BridgeSrcMacFilterRowStatus | 1.3.6.1.4.1.5504.18.2.4.3.3.1.4 | RowStatus | read-create | |
| bitstormHp160CfgBridgeL4SrcPortFilterTable | 1.3.6.1.4.1.5504.18.2.4.3.4 | not-accessible | The L4 Src filter configuration table. | |
| bitstormHp160CfgBridgeL4SrcPortFilterEntry | 1.3.6.1.4.1.5504.18.2.4.3.4.1 | not-accessible | An Entry in the bitstormHp160CfgBridgeL4SrcPortFilterTable | |
| I32 bitstormHp160CfgBridgeL4SrcPortFilterIndex | 1.3.6.1.4.1.5504.18.2.4.3.4.1.1 | Integer32 | read-only | |
| NUM bitstormHp160CfgBridgeL4SrcPortFilterInputBridgePort | 1.3.6.1.4.1.5504.18.2.4.3.4.1.2 | InterfaceIndex | read-create | |
| I32 bitstormHp160CfgBridgeL4SrcPortFilterDestinationPort | 1.3.6.1.4.1.5504.18.2.4.3.4.1.3 | Integer32 | read-create | |
| ROW bitstormHp160CfgBridgeL4SrcPortFilterRowStatus | 1.3.6.1.4.1.5504.18.2.4.3.4.1.4 | RowStatus | read-create | |
| bitstormHp160CfgBridgeSrcIpFilterTable | 1.3.6.1.4.1.5504.18.2.4.3.5 | not-accessible | ||
| bitstormHp160CfgBridgeSrcIpFilterEntry | 1.3.6.1.4.1.5504.18.2.4.3.5.1 | not-accessible | ||
| I32 bitstormHp160BridgeSrcIpFilterIndex | 1.3.6.1.4.1.5504.18.2.4.3.5.1.1 | Integer32 | read-only | |
| NUM bitstormHp160BridgeSrcIpFilterBpIndex | 1.3.6.1.4.1.5504.18.2.4.3.5.1.2 | InterfaceIndex | read-create | |
| IP bitstormHp160BridgeSrcIpFilterSrcIpStart | 1.3.6.1.4.1.5504.18.2.4.3.5.1.3 | IpAddress | read-create | |
| IP bitstormHp160BridgeSrcIpFilterSrcIpEnd | 1.3.6.1.4.1.5504.18.2.4.3.5.1.4 | IpAddress | read-create | |
| ROW bitstormHp160BridgeSrcIpFilterRowStatus | 1.3.6.1.4.1.5504.18.2.4.3.5.1.5 | RowStatus | read-create | |
| bitstormHp160CfgBridgeDstIpFilterTable | 1.3.6.1.4.1.5504.18.2.4.3.6 | not-accessible | ||
| bitstormHp160CfgBridgeDstIpFilterEntry | 1.3.6.1.4.1.5504.18.2.4.3.6.1 | not-accessible | ||
| I32 bitstormHp160BridgeDstIpFilterIndex | 1.3.6.1.4.1.5504.18.2.4.3.6.1.1 | Integer32 | read-only | |
| NUM bitstormHp160BridgeDstIpFilterBpIndex | 1.3.6.1.4.1.5504.18.2.4.3.6.1.2 | InterfaceIndex | read-create | |
| IP bitstormHp160BridgeDstIpFilterSrcIpStart | 1.3.6.1.4.1.5504.18.2.4.3.6.1.3 | IpAddress | read-create | |
| IP bitstormHp160BridgeDstIpFilterSrcIpEnd | 1.3.6.1.4.1.5504.18.2.4.3.6.1.4 | IpAddress | read-create | |
| ROW bitstormHp160BridgeDstIpFilterRowStatus | 1.3.6.1.4.1.5504.18.2.4.3.6.1.5 | RowStatus | read-create | |
| bitstormHp160CfgBridgeNetBiosFilterTable | 1.3.6.1.4.1.5504.18.2.4.3.7 | not-accessible | ||
| bitstormHp160CfgBridgeNetBiosFilterEntry | 1.3.6.1.4.1.5504.18.2.4.3.7.1 | not-accessible | An Entry in the bitstormHp160CfgBridgeNetBiosFilterTable | |
| NUM bitstormHp160CfgBridgeNetBiosFilterInputBridgePort | 1.3.6.1.4.1.5504.18.2.4.3.7.1.1 | InterfaceIndex | read-only | |
| INT bitstormHp160CfgBridgeNetBiosFilterStatus | 1.3.6.1.4.1.5504.18.2.4.3.7.1.2 | INTEGER | read-create | |
| ROW bitstormHp160CfgBridgeNetBiosFilterRowStatus | 1.3.6.1.4.1.5504.18.2.4.3.7.1.3 | RowStatus | read-create | |
| bitstormHp160CfgBridgeArpBcastFilterTable | 1.3.6.1.4.1.5504.18.2.4.3.8 | not-accessible | ||
| bitstormHp160CfgBridgeArpBcastFilterEntry | 1.3.6.1.4.1.5504.18.2.4.3.8.1 | not-accessible | An Entry in the bitstormHp160CfgBridgeArpBcastFilterTable | |
| NUM bitstormHp160CfgBridgeArpBcastFilterInputBridgePort | 1.3.6.1.4.1.5504.18.2.4.3.8.1.1 | InterfaceIndex | read-only | |
| INT bitstormHp160CfgBridgeArpBcastFilterStatus | 1.3.6.1.4.1.5504.18.2.4.3.8.1.2 | INTEGER | read-create | |
| ROW bitstormHp160CfgBridgeArpBcastFilterRowStatus | 1.3.6.1.4.1.5504.18.2.4.3.8.1.3 | RowStatus | read-create | |
| bitstormHp160CfgBridgeAllowedIpFilterTable | 1.3.6.1.4.1.5504.18.2.4.3.9 | not-accessible | ||
| bitstormHp160CfgBridgeAllowedIpFilterEntry | 1.3.6.1.4.1.5504.18.2.4.3.9.1 | not-accessible | ||
| I32 bitstormHp160BridgeAllowedIpFilterIndex | 1.3.6.1.4.1.5504.18.2.4.3.9.1.1 | Integer32 | read-only | |
| NUM bitstormHp160BridgeAllowedIpFilterBpIndex | 1.3.6.1.4.1.5504.18.2.4.3.9.1.2 | InterfaceIndex | read-create | |
| INT bitstormHp160BridgeAllowedIpFilterIsDynamic | 1.3.6.1.4.1.5504.18.2.4.3.9.1.3 | INTEGER | read-create | |
| IP bitstormHp160BridgeAllowedIpFilterSrcIp | 1.3.6.1.4.1.5504.18.2.4.3.9.1.4 | IpAddress | read-create | |
| ROW bitstormHp160BridgeAllowedIpFilterRowStatus | 1.3.6.1.4.1.5504.18.2.4.3.9.1.5 | RowStatus | read-create | |
| bitstormHp160CfgBridgeDstMacFilterTable | 1.3.6.1.4.1.5504.18.2.4.3.10 | not-accessible | ||
| bitstormHp160CfgBridgeDstMacFilterEntry | 1.3.6.1.4.1.5504.18.2.4.3.10.1 | not-accessible | ||
| I32 bitstormHp160BridgeDstMacFilterIndex | 1.3.6.1.4.1.5504.18.2.4.3.10.1.1 | Integer32 | read-only | |
| NUM bitstormHp160BridgeDstMacFilterBpIndex | 1.3.6.1.4.1.5504.18.2.4.3.10.1.2 | InterfaceIndex | read-create | |
| PHY bitstormHp160BridgeDstMacFilterDstMac | 1.3.6.1.4.1.5504.18.2.4.3.10.1.3 | PhysAddress | read-create | |
| ROW bitstormHp160BridgeDstMacFilterRowStatus | 1.3.6.1.4.1.5504.18.2.4.3.10.1.4 | RowStatus | read-create | |
| bitstormHp160CfgLacpGroup | 1.3.6.1.4.1.5504.18.2.4.4 | |||
| INT bitstormHp160CfgLACPMode | 1.3.6.1.4.1.5504.18.2.4.4.1 | INTEGER | read-write | System ID of LACP port. |
| bitstormHp160CfgIgmpGroup | 1.3.6.1.4.1.5504.18.2.4.5 | |||
| INT bitstormHp160CfgIgmpMode | 1.3.6.1.4.1.5504.18.2.4.5.1 | INTEGER | read-write | |
| I32 bitstormHp160CfgIgmpTimeoutQuery | 1.3.6.1.4.1.5504.18.2.4.5.2 | Integer32 | read-write | |
| I32 bitstormHp160CfgIgmpTimeoutUri | 1.3.6.1.4.1.5504.18.2.4.5.3 | Integer32 | read-write | |
| I32 bitstormHp160CfgIgmpTimeoutBc | 1.3.6.1.4.1.5504.18.2.4.5.4 | Integer32 | read-write | |
| I32 bitstormHp160CfgIgmpTimeoutMrt | 1.3.6.1.4.1.5504.18.2.4.5.5 | Integer32 | read-write | |
| I32 bitstormHp160CfgIgmpTimeoutLmqt | 1.3.6.1.4.1.5504.18.2.4.5.6 | Integer32 | read-write | |
| I32 bitstormHp160CfgIgmpTimeoutGmt | 1.3.6.1.4.1.5504.18.2.4.5.7 | Integer32 | read-write | |
| INT bitstormHp160CfgIgmpVersion | 1.3.6.1.4.1.5504.18.2.4.5.8 | INTEGER | read-write | |
| T/F bitstormHp160CfgIgmpAclMode | 1.3.6.1.4.1.5504.18.2.4.5.9 | TruthValue | read-write | |
| INT bitstormHp160CfgIgmpLeaveMode | 1.3.6.1.4.1.5504.18.2.4.5.10 | INTEGER | read-write | |
| bitstormHp160CfgIgmpGroupTable | 1.3.6.1.4.1.5504.18.2.4.5.13 | not-accessible | ||
| bitstormHp160CfgIgmpGroupEntry | 1.3.6.1.4.1.5504.18.2.4.5.13.1 | not-accessible | ||
| IP bitstormHp160CfgIgmpGroupIp | 1.3.6.1.4.1.5504.18.2.4.5.13.1.1 | IpAddress | read-only | |
| I32 bitstormHp160CfgIgmpGroupVlan | 1.3.6.1.4.1.5504.18.2.4.5.13.1.2 | Integer32 | read-only | |
| I32 bitstormHp160CfgIgmpGroupAddActions | 1.3.6.1.4.1.5504.18.2.4.5.13.1.3 | Integer32 | read-only | |
| I32 bitstormHp160CfgIgmpGroupNumOfEntries | 1.3.6.1.4.1.5504.18.2.4.5.13.1.4 | Integer32 | read-only | |
| I32 bitstormHp160CfgIgmpGroupInclude | 1.3.6.1.4.1.5504.18.2.4.5.13.1.5 | Integer32 | read-only | |
| OCT bitstormHp160CfgIgmpGroupBitmap | 1.3.6.1.4.1.5504.18.2.4.5.13.1.6 | OCTET STRING | read-only | |
| bitstormHp160CfgIgmpSource | 1.3.6.1.4.1.5504.18.2.4.5.14 | |||
| IP bitstormHp160CfgIgmpSourceGroupIp | 1.3.6.1.4.1.5504.18.2.4.5.14.1 | IpAddress | read-write | |
| I32 bitstormHp160CfgIgmpSourceGroupVlan | 1.3.6.1.4.1.5504.18.2.4.5.14.2 | Integer32 | read-write | |
| bitstormHp160CfgIgmpRouterPortTable | 1.3.6.1.4.1.5504.18.2.4.5.15 | not-accessible | ||
| bitstormHp160CfgIgmpRouterPortEntry | 1.3.6.1.4.1.5504.18.2.4.5.15.1 | not-accessible | ||
| I32 bitstormHp160CfgIgmpRouterPortVlanId | 1.3.6.1.4.1.5504.18.2.4.5.15.1.1 | Integer32 | read-only | |
| NUM bitstormHp160CfgIgmpRouterPortBportIndex | 1.3.6.1.4.1.5504.18.2.4.5.15.1.2 | InterfaceIndex | read-only | |
| NUM bitstormHp160CfgIgmpRouterPortBitmap | 1.3.6.1.4.1.5504.18.2.4.5.15.1.3 | InterfaceIndex | read-create | |
| OCT bitstormHp160CfgIgmpRouterPortRouterIp | 1.3.6.1.4.1.5504.18.2.4.5.15.1.4 | OCTET STRING | read-create | |
| OCT bitstormHp160CfgIgmpRouterPortRouterReportIp | 1.3.6.1.4.1.5504.18.2.4.5.15.1.5 | OCTET STRING | read-create | |
| ROW bitstormHp160CfgIgmpRouterPortRowStatus | 1.3.6.1.4.1.5504.18.2.4.5.15.1.6 | RowStatus | read-create | |
| bitstormHp160CfgIgmpAclProfileTable | 1.3.6.1.4.1.5504.18.2.4.5.16 | not-accessible | ||
| bitstormHp160CfgIgmpAclProfileEntry | 1.3.6.1.4.1.5504.18.2.4.5.16.1 | not-accessible | ||
| I32 bitstormHp160CfgIgmpAclProfileIndex | 1.3.6.1.4.1.5504.18.2.4.5.16.1.1 | Integer32 | not-accessible | |
| OCT bitstormHp160CfgIgmpAclProfileChMap | 1.3.6.1.4.1.5504.18.2.4.5.16.1.2 | OCTET STRING | read-create | IP address total 1024 bytes. byte 1~256 for bank1 (64 ip address) byte 257~512 for bank2 (64 ip address) byte 513~768 for bank3 (64 ip address) byte 769~1024 for bank4 (64 ip address) |
| OCT bitstormHp160CfgIgmpAclProfileVlanMap | 1.3.6.1.4.1.5504.18.2.4.5.16.1.3 | OCTET STRING | read-create | User (packet) VLAN id total 512 bytes. byte 1~128 for bank1 (64 vlan id) byte 129~256 for bank2 (64 vlan id) byte 257~384 for bank3 (64 vlan id) byte 385~512 for bank4 (64 vlan id) |
| OCT bitstormHp160CfgIgmpAclProfileVlanEgressMap | 1.3.6.1.4.1.5504.18.2.4.5.16.1.4 | OCTET STRING | read-create | VlanEgressMap total 256 bytes. 1: tag, 2 : untag |
| I32 bitstormHp160CfgIgmpAclProfileMcCount | 1.3.6.1.4.1.5504.18.2.4.5.16.1.5 | Integer32 | read-create | Max Channel Count |
| ROW bitstormHp160CfgIgmpAclProfileRowStatus | 1.3.6.1.4.1.5504.18.2.4.5.16.1.6 | RowStatus | read-create | |
| INT bitstormHp160CfgIgmpAclProfileUsedCount | 1.3.6.1.4.1.5504.18.2.4.5.16.1.7 | INTEGER | read-only | The value is not zero means the profile is in used,then the profile can't be delete. |
| I32 bitstormHp160CfgIgmpAclProfileMsgCount | 1.3.6.1.4.1.5504.18.2.4.5.16.1.8 | Integer32 | read-create | Max IGMP Message Count. Default value is 128. |
| bitstormHp160CfgIgmpBridgePortBindTable | 1.3.6.1.4.1.5504.18.2.4.5.17 | not-accessible | ||
| bitstormHp160CfgIgmpBridgePortBindEntry | 1.3.6.1.4.1.5504.18.2.4.5.17.1 | not-accessible | ||
| I32 bitstormHp160CfgIgmpBindBpId | 1.3.6.1.4.1.5504.18.2.4.5.17.1.1 | Integer32 | not-accessible | |
| I32 bitstormHp160CfgIgmpBindProfileId | 1.3.6.1.4.1.5504.18.2.4.5.17.1.2 | Integer32 | read-write | |
| bitstormHp160CfgRstpGroup | 1.3.6.1.4.1.5504.18.2.4.6 | |||
| INT bitstormHp160CfgRstpForceVersion | 1.3.6.1.4.1.5504.18.2.4.6.1 | INTEGER | read-write | |
| INT bitstormHp160StpEnable | 1.3.6.1.4.1.5504.18.2.4.6.2 | INTEGER | read-write | |
| bitstormHp160CfgRstpPortTable | 1.3.6.1.4.1.5504.18.2.4.6.3 | not-accessible | ||
| bitstormHp160CfgRstpPortEntry | 1.3.6.1.4.1.5504.18.2.4.6.3.1 | not-accessible | ||
| I32 bitstormHp160CfgRstpPortIndex | 1.3.6.1.4.1.5504.18.2.4.6.3.1.1 | Integer32 | read-only | |
| INT bitstormHp160CfgRstpPortAdminEdge | 1.3.6.1.4.1.5504.18.2.4.6.3.1.2 | INTEGER | read-write | |
| INT bitstormHp160CfgRstpPortAdminPoint2Point | 1.3.6.1.4.1.5504.18.2.4.6.3.1.3 | INTEGER | read-write | |
| INT bitstormHp160CfgRstpPortAdminNonSTP | 1.3.6.1.4.1.5504.18.2.4.6.3.1.4 | INTEGER | read-write | |
| OCT bitstormHp160StpBridgeID | 1.3.6.1.4.1.5504.18.2.4.6.4 | OCTET STRING | read-only | |
| bitstormHp160CfgRelayGroup | 1.3.6.1.4.1.5504.18.2.4.7 | |||
| INT bitstormHp160CfgDhcpMode | 1.3.6.1.4.1.5504.18.2.4.7.1 | INTEGER | read-write | |
| INT bitstormHp160CfgDhcpSubOptMode | 1.3.6.1.4.1.5504.18.2.4.7.2 | INTEGER | read-write | |
| INT bitstormHp160CfgDhcpCircuitIdType | 1.3.6.1.4.1.5504.18.2.4.7.3 | INTEGER | read-write | default Set circuit default type scbv Set circuit scbv type scv Set circuit scv type sc Set circuit sc type customer Set circuit customer type |
| OCT bitstormHp160CfgDhcpName | 1.3.6.1.4.1.5504.18.2.4.7.4 | OCTET STRING | read-write | |
| OCT bitstormHp160CfgPppoeAcName | 1.3.6.1.4.1.5504.18.2.4.7.5 | OCTET STRING | read-write | |
| OCT bitstormHp160CfgPppoeSrvName | 1.3.6.1.4.1.5504.18.2.4.7.6 | OCTET STRING | read-write | |
| bitstormHp160CfgDhcpDslIdConfigTable | 1.3.6.1.4.1.5504.18.2.4.7.8 | not-accessible | ||
| bitstormHp160CfgDhcpDslIdConfigEntry | 1.3.6.1.4.1.5504.18.2.4.7.8.1 | not-accessible | ||
| NUM bitstormHp160CfgDhcpDslIfIndex | 1.3.6.1.4.1.5504.18.2.4.7.8.1.1 | InterfaceIndex | not-accessible | IfIndex. |
| OCT bitstormHp160CfgDslCircuitID | 1.3.6.1.4.1.5504.18.2.4.7.8.1.2 | OCTET STRING | read-write | |
| OCT bitstormHp160CfgDslRemoteID | 1.3.6.1.4.1.5504.18.2.4.7.8.1.3 | OCTET STRING | read-write | |
| T/F bitstormHp160CfgDslIdTrusted | 1.3.6.1.4.1.5504.18.2.4.7.8.1.4 | TruthValue | read-write | |
| INT bitstormHp160CfgDslpppoeMode | 1.3.6.1.4.1.5504.18.2.4.7.8.1.5 | INTEGER | read-write | |
| bitstormHp160CfgDhcpServerProfileTable | 1.3.6.1.4.1.5504.18.2.4.7.9 | not-accessible | ||
| bitstormHp160CfgDhcpServerProfileEntry | 1.3.6.1.4.1.5504.18.2.4.7.9.1 | not-accessible | ||
| I32 bitstormHp160CfgDhcpServerPrfIndex | 1.3.6.1.4.1.5504.18.2.4.7.9.1.1 | Integer32 | not-accessible | |
| OCT bitstormHp160CfgDhcpServerPrfStartIp | 1.3.6.1.4.1.5504.18.2.4.7.9.1.2 | OCTET STRING | read-create | |
| OCT bitstormHp160CfgDhcpServerPrfEndIp | 1.3.6.1.4.1.5504.18.2.4.7.9.1.3 | OCTET STRING | read-create | |
| OCT bitstormHp160CfgDhcpServerPrfIpMsk | 1.3.6.1.4.1.5504.18.2.4.7.9.1.4 | OCTET STRING | read-create | |
| OCT bitstormHp160CfgDhcpServerPrfDefGatewayIp | 1.3.6.1.4.1.5504.18.2.4.7.9.1.5 | OCTET STRING | read-create | |
| OCT bitstormHp160CfgDhcpServerPrfDNS1Ip | 1.3.6.1.4.1.5504.18.2.4.7.9.1.6 | OCTET STRING | read-create | |
| OCT bitstormHp160CfgDhcpServerPrfDNS2Ip | 1.3.6.1.4.1.5504.18.2.4.7.9.1.7 | OCTET STRING | read-create | |
| I32 bitstormHp160CfgDhcpServerPrfLeaseTime | 1.3.6.1.4.1.5504.18.2.4.7.9.1.8 | Integer32 | read-create | seconds |
| INT bitstormHp160CfgDhcpServerPrfUsedCount | 1.3.6.1.4.1.5504.18.2.4.7.9.1.9 | INTEGER | read-only | |
| ROW bitstormHp160CfgDhcpServerPrfRowStatus | 1.3.6.1.4.1.5504.18.2.4.7.9.1.10 | RowStatus | read-create | |
| bitstormHp160CfgDhcpServerProfileBindTable | 1.3.6.1.4.1.5504.18.2.4.7.10 | not-accessible | ||
| bitstormHp160CfgDhcpServerProfileBindEntry | 1.3.6.1.4.1.5504.18.2.4.7.10.1 | not-accessible | ||
| I32 bitstormHp160ServerBindBpIndex | 1.3.6.1.4.1.5504.18.2.4.7.10.1.1 | Integer32 | not-accessible | |
| I32 bitstormHp160ServerBindPrfIndex | 1.3.6.1.4.1.5504.18.2.4.7.10.1.2 | Integer32 | read-write | |
| bitstormHp160CfgDhcpQueryClientTable | 1.3.6.1.4.1.5504.18.2.4.7.11 | not-accessible | ||
| bitstormHp160CfgDhcpQueryClientEntry | 1.3.6.1.4.1.5504.18.2.4.7.11.1 | not-accessible | ||
| I32 bitstormHp160ServerQueryBpIndex | 1.3.6.1.4.1.5504.18.2.4.7.11.1.1 | Integer32 | not-accessible | |
| I32 bitstormHp160ServerQueryClientIndex | 1.3.6.1.4.1.5504.18.2.4.7.11.1.2 | Integer32 | read-only | |
| OCT bitstormHp160ServerQueryIp | 1.3.6.1.4.1.5504.18.2.4.7.11.1.3 | OCTET STRING | read-only | |
| PHY bitstormHp160ServerQueryMac | 1.3.6.1.4.1.5504.18.2.4.7.11.1.4 | PhysAddress | read-only | |
| OCT bitstormHp160ServerQueryExpTime | 1.3.6.1.4.1.5504.18.2.4.7.11.1.5 | OCTET STRING | read-only | |
| I32 bitstormHp160ServerQueryLeaseTime | 1.3.6.1.4.1.5504.18.2.4.7.11.1.6 | Integer32 | read-only | |
| bitstormHp160CfgDhcpStaticIPTable | 1.3.6.1.4.1.5504.18.2.4.7.12 | not-accessible | ||
| bitstormHp160CfgDhcpStaticIPEntry | 1.3.6.1.4.1.5504.18.2.4.7.12.1 | not-accessible | ||
| I32 bitstormHp160StaticIndex | 1.3.6.1.4.1.5504.18.2.4.7.12.1.1 | Integer32 | not-accessible | |
| I32 bitstormHp160StaticIPBpIndex | 1.3.6.1.4.1.5504.18.2.4.7.12.1.2 | Integer32 | read-create | |
| OCT bitstormHp160StaticIp | 1.3.6.1.4.1.5504.18.2.4.7.12.1.3 | OCTET STRING | read-create | |
| PHY bitstormHp160StaticMac | 1.3.6.1.4.1.5504.18.2.4.7.12.1.4 | PhysAddress | read-create | |
| ROW bitstormHp160StaticRowStatus | 1.3.6.1.4.1.5504.18.2.4.7.12.1.5 | RowStatus | read-create | |
| bitstormHp160CfgVpmtGroup | 1.3.6.1.4.1.5504.18.2.4.8 | |||
| bitstormHp160CfgVpmtTrunkTable | 1.3.6.1.4.1.5504.18.2.4.8.1 | not-accessible | ||
| bitstormHp160CfgVpmtTrunkEntry | 1.3.6.1.4.1.5504.18.2.4.8.1.1 | not-accessible | ||
| INT bitstormHp160CfgVpmtIndex | 1.3.6.1.4.1.5504.18.2.4.8.1.1.1 | INTEGER | not-accessible | 1..3 |
| OCT bitstormHp160CfgVpmtPriority | 1.3.6.1.4.1.5504.18.2.4.8.1.1.2 | OCTET STRING | read-write | for priority 0..7 Queue No : 0 .. 3 0 .. 2 for shaping Queue(0 : High prio, 1 : Medium prio, 2 : Low prio) , the enetTrafficDescrType bind to this prio should be CIR/CIREIR/PPR. 3 only for WFQ Quese(Lowest prio of these 4 Queses) , the enetTrafficDescrType bind to this prio should be WFQ. It isn't allowed that a shaping Queue maps to enetTrafficDescrType WFQ It isn't allowed that a WFQ Queue maps to enetTrafficDescrType CIR/CIREIR/PPR OAMP Layer 2 will check the relationship of Queue mapping and enetTrafficDescrType. |
| OCT bitstormHp160CfgVpmtDenyMode | 1.3.6.1.4.1.5504.18.2.4.8.1.1.3 | OCTET STRING | read-write | 0:pass, 1:deny |
| bitstormHp160CfgVpmtBportProfileTable | 1.3.6.1.4.1.5504.18.2.4.8.2 | not-accessible | ||
| bitstormHp160CfgVpmtBportProfileEntry | 1.3.6.1.4.1.5504.18.2.4.8.2.1 | not-accessible | ||
| INT bitstormHp160CfgVpmtProfileIndex | 1.3.6.1.4.1.5504.18.2.4.8.2.1.1 | INTEGER | not-accessible | 1..3 |
| OCT bitstormHp160CfgVpmtProfilePriority | 1.3.6.1.4.1.5504.18.2.4.8.2.1.2 | OCTET STRING | read-create | for priority 0..7 Queue No : 0 .. 3 0 .. 2 for shaping Queue(0 : High prio, 1 : Medium prio, 2 : Low prio) , the enetTrafficDescrType bind to this prio should be CIR/CIREIR/PPR. 3 only for WFQ Quese(Lowest prio of these 4 Queses) , the enetTrafficDescrType bind to this prio should be WFQ. It isn't allowed that a shaping Queue maps to enetTrafficDescrType WFQ It isn't allowed that a WFQ Queue maps to enetTrafficDescrType CIR/CIREIR/PPR OAMP Layer 2 will check the relationship of Queue mapping and enetTrafficDescrType. |
| OCT bitstormHp160CfgVpmtProfileDenyMode | 1.3.6.1.4.1.5504.18.2.4.8.2.1.3 | OCTET STRING | read-create | 0:pass, 1:deny |
| OCT bitstormHp160CfgVpmtProfileEnetProfileIndex | 1.3.6.1.4.1.5504.18.2.4.8.2.1.4 | OCTET STRING | read-create | enet traffic descriptor index. |
| INT bitstormHp160CfgVpmtProfileUsedCount | 1.3.6.1.4.1.5504.18.2.4.8.2.1.5 | INTEGER | read-only | |
| ROW bitstormHp160CfgVpmtProfileRowStatus | 1.3.6.1.4.1.5504.18.2.4.8.2.1.6 | RowStatus | read-create | bitstormHp160CfgVpmtRowStatus. |
| bitstormHp160CfgVpmtBridgePortBindTable | 1.3.6.1.4.1.5504.18.2.4.8.3 | not-accessible | ||
| bitstormHp160CfgVpmtBridgePortBindEntry | 1.3.6.1.4.1.5504.18.2.4.8.3.1 | not-accessible | ||
| I32 bitstormHp160CfgVpmtBindBpId | 1.3.6.1.4.1.5504.18.2.4.8.3.1.1 | Integer32 | not-accessible | |
| I32 bitstormHp160CfgVpmtBindProfileId | 1.3.6.1.4.1.5504.18.2.4.8.3.1.2 | Integer32 | read-write | |
| bitstormHp160CfgSystemConfiguration | 1.3.6.1.4.1.5504.18.2.4.9 | |||
| I32 bitstormHp160CfgSystemExtEtherType | 1.3.6.1.4.1.5504.18.2.4.9.1 | Integer32 | read-write | |
| INT bitstormHp160CfgSystemAllowDownstreamBc | 1.3.6.1.4.1.5504.18.2.4.9.2 | INTEGER | read-write | 0:disable(only ARP,DHCP are allowed), 1:enable(ALL bccast are allowed) |
| INT bitstormHp160CfgSystemAddAllowIpBySnoopDHCP | 1.3.6.1.4.1.5504.18.2.4.9.3 | INTEGER | read-write | 0:disable, 1:enable, allowIpFilter should be enabled first. |
| INT bitstormHp160CfgSystemAgingTimePerPort | 1.3.6.1.4.1.5504.18.2.4.9.4 | INTEGER | read-write | 1:enable, 0:disable->Old mechanism, referecne to TpAgingTime. |
| INT bitstormHp160CfgSystemReplaceArpMac | 1.3.6.1.4.1.5504.18.2.4.9.5 | INTEGER | read-write | 0:disable, 1:enable(mac of arp will be replaced) |
| PHY bitstormHp160CfgSystemSnoopArpDefaultGatewayMac | 1.3.6.1.4.1.5504.18.2.4.9.6 | PhysAddress | read-create | string hex mac format in DB, example->FF:FF:FF:FF:FF:FF |
| INT bitstormHp160CfgSystemArpSpoofing | 1.3.6.1.4.1.5504.18.2.4.9.7 | INTEGER | read-write | 0:disable this arp spoof function, L2 will not check the arp reply packet from line side. 1:enable this arp spoof function, L2 will check the arp reply packet from line side. |
| INT bitstormHp160CfgSystemAntiMacSpoofing | 1.3.6.1.4.1.5504.18.2.4.9.8 | INTEGER | read-write | 0:able to provide service to users with duplicate MAC addresses (by default) 1:able to deny service to users with duplicate MAC addresses. |
| bitstormHp160AgingTimeTable | 1.3.6.1.4.1.5504.18.2.4.10 | not-accessible | ||
| bitstormHp160AgingTimeEntry | 1.3.6.1.4.1.5504.18.2.4.10.1 | not-accessible | ||
| NUM bitstormHp160AgingTimeIfcIndex | 1.3.6.1.4.1.5504.18.2.4.10.1.1 | InterfaceIndex | read-only | |
| I32 bitstormHp160AgingTime | 1.3.6.1.4.1.5504.18.2.4.10.1.2 | Integer32 | read-create | 10..600 second |
| bitstormHp160SnoopArpRequestTable | 1.3.6.1.4.1.5504.18.2.4.11 | not-accessible | ||
| bitstormHp160SnoopArpRequestEntry | 1.3.6.1.4.1.5504.18.2.4.11.1 | not-accessible | ||
| NUM bitstormHp160SnoopArpIfcIndex | 1.3.6.1.4.1.5504.18.2.4.11.1.1 | InterfaceIndex | read-only | |
| INT bitstormHp160LearnByDhcp | 1.3.6.1.4.1.5504.18.2.4.11.1.2 | INTEGER | read-create | 0:defaultGatewayMac is preconfigured, 1:defaultGatewayMac is learnByDhcp. Once the value is changed, the defaultGatewayMac will be cleared to FF:FF:FF:FF:FF:FF |
| PHY bitstormHp160DefaultGatewayMac | 1.3.6.1.4.1.5504.18.2.4.11.1.3 | PhysAddress | read-create | string hex mac format in DB, example->FF:FF:FF:FF:FF:FF FF:FF:FF:FF:FF:FF means empty entry, the bport doesn't exist. |
| bitstormHp160BridgeArpSpoofingTable | 1.3.6.1.4.1.5504.18.2.4.12 | not-accessible | ||
| bitstormHp160BridgeArpSpoofingEntry | 1.3.6.1.4.1.5504.18.2.4.12.1 | not-accessible | ||
| I32 bitstormHp160ArpSpoofingIndex | 1.3.6.1.4.1.5504.18.2.4.12.1.1 | Integer32 | read-only | |
| I32 bitstormHp160ArpSpoofingBpIndex | 1.3.6.1.4.1.5504.18.2.4.12.1.2 | Integer32 | read-create | |
| IP bitstormHp160ArpSpoofingSrcIp | 1.3.6.1.4.1.5504.18.2.4.12.1.3 | IpAddress | read-create | |
| PHY bitstormHp160ArpSpoofingSrcMac | 1.3.6.1.4.1.5504.18.2.4.12.1.4 | PhysAddress | read-create | string hex mac format in DB, example->FF:FF:FF:FF:FF:FF |
| ROW bitstormHp160ArpSpoofingRowStatus | 1.3.6.1.4.1.5504.18.2.4.12.1.5 | RowStatus | read-create | |
| bitstormHp160CfgLayerIIServiceOption | 1.3.6.1.4.1.5504.18.2.4.13 | |||
| INT bitstormHp160CfgAclService | 1.3.6.1.4.1.5504.18.2.4.13.1 | INTEGER | read-write | |
| INT bitstormHp160CfgPppoeService | 1.3.6.1.4.1.5504.18.2.4.13.2 | INTEGER | read-write | |
| INT bitstormHp160CfgFilterAndPriorityRemarkService | 1.3.6.1.4.1.5504.18.2.4.13.3 | INTEGER | read-write | |
| INT bitstormHp160CfgRateLimitService | 1.3.6.1.4.1.5504.18.2.4.13.4 | INTEGER | read-write | |
| INT bitstormHp160CfgStackVlanService | 1.3.6.1.4.1.5504.18.2.4.13.5 | INTEGER | read-write | |
| INT bitstormHp160CfgNetBiosDenialService | 1.3.6.1.4.1.5504.18.2.4.13.6 | INTEGER | read-write | |
| INT bitstormHp160CfgAllowIpService | 1.3.6.1.4.1.5504.18.2.4.13.7 | INTEGER | read-write | |
| bitstormHp160CfgXdslSetting | 1.3.6.1.4.1.5504.18.2.5 | |||
| bitstormHp160CfgXdslLineInfoTable | 1.3.6.1.4.1.5504.18.2.5.2 | not-accessible | The Xdsl Line configuration table. | |
| bitstormHp160CfgXdslLineInfoEntry | 1.3.6.1.4.1.5504.18.2.5.2.1 | not-accessible | An Entry in the bitstormHp160CfgXdslLineInfoTable | |
| NUM bitstormHp160CfgXdslIfIndex | 1.3.6.1.4.1.5504.18.2.5.2.1.1 | InterfaceIndex | not-accessible | IfIndex. |
| OCT bitstormHp160CfgXdslLinePortID | 1.3.6.1.4.1.5504.18.2.5.2.1.2 | OCTET STRING | read-write | The Port Identifier. |
| OCT bitstormHp160CfgXdslLinePortDescr | 1.3.6.1.4.1.5504.18.2.5.2.1.3 | OCTET STRING | read-write | The Port Description. |
| OCT bitstormHp160CfgXdslLinePortPhoneNbr | 1.3.6.1.4.1.5504.18.2.5.2.1.4 | OCTET STRING | read-write | The Port Phone No. |
| bitstormHp160CfgXdslLineTable | 1.3.6.1.4.1.5504.18.2.5.3 | not-accessible | ||
| bitstormHp160CfgXdslLineEntry | 1.3.6.1.4.1.5504.18.2.5.3.1 | not-accessible | ||
| NUM bitstormHp160CfgXdslIfIndex2 | 1.3.6.1.4.1.5504.18.2.5.3.1.1 | InterfaceIndex | not-accessible | IfIndex. |
| INT bitstormHp160CfgXdslLineAdminStatus | 1.3.6.1.4.1.5504.18.2.5.3.1.2 | INTEGER | read-write | The desired state of the interface. When a managed system initializes, all interfaces start with ifAdminStatus in the down(2) state. |
| INT bitstormHp160CfgXdslLineOperStatus | 1.3.6.1.4.1.5504.18.2.5.3.1.3 | INTEGER | read-only | |
| bitstormHp160CfgCLISettings | 1.3.6.1.4.1.5504.18.2.6 | |||
| I32 bitstormHp160CfgCLITimeout | 1.3.6.1.4.1.5504.18.2.6.1 | Integer32 | read-write | 60 ~ 65535 seconds, 0 : no timeout 1 ~ 59 is not allowed. |
| bitstormHp160CfgCluster | 1.3.6.1.4.1.5504.18.2.7 | |||
| bitstormHp160CfgClusterConfig | 1.3.6.1.4.1.5504.18.2.7.1 | |||
| OCT bitstormHp160CfgClusterName | 1.3.6.1.4.1.5504.18.2.7.1.1 | OCTET STRING | read-write | |
| OCT bitstormHp160CfgClusterDomain | 1.3.6.1.4.1.5504.18.2.7.1.2 | OCTET STRING | read-write | |
| ADR bitstormHp160CfgClusterManagementIp | 1.3.6.1.4.1.5504.18.2.7.1.3 | TAddress | read-write | |
| ADR bitstormHp160CfgClusterManagementNetmask | 1.3.6.1.4.1.5504.18.2.7.1.4 | TAddress | read-write | |
| ADR bitstormHp160CfgClusterManagementGateway | 1.3.6.1.4.1.5504.18.2.7.1.5 | TAddress | read-write | |
| I32 bitstormHp160CfgClusterPriority | 1.3.6.1.4.1.5504.18.2.7.1.6 | Integer32 | read-write | |
| INT bitstormHp160CfgClusterClustered | 1.3.6.1.4.1.5504.18.2.7.1.7 | INTEGER | read-write | |
| INT bitstormHp160CfgClusterSlaveOnly | 1.3.6.1.4.1.5504.18.2.7.1.8 | INTEGER | read-write | |
| INT bitstormHp160CfgClusterState | 1.3.6.1.4.1.5504.18.2.7.1.9 | INTEGER | read-only | |
| bitstormHp160CfgClusterMemberInfoTable | 1.3.6.1.4.1.5504.18.2.7.2 | not-accessible | ||
| bitstormHp160CfgClusterMemberInfoEntry | 1.3.6.1.4.1.5504.18.2.7.2.1 | not-accessible | ||
| I32 bitstormHp160CfgClusterMemberId | 1.3.6.1.4.1.5504.18.2.7.2.1.1 | Integer32 | read-only | |
| ADR bitstormHp160CfgClusterMemberIp | 1.3.6.1.4.1.5504.18.2.7.2.1.2 | TAddress | read-only | |
| OCT bitstormHp160CfgClusterMemberName | 1.3.6.1.4.1.5504.18.2.7.2.1.3 | OCTET STRING | read-only | |
| INT bitstormHp160CfgClusterMemberState | 1.3.6.1.4.1.5504.18.2.7.2.1.4 | INTEGER | read-only | |
| bitstormHp160CfgEnetTrafficDescrTable | 1.3.6.1.4.1.5504.18.2.8 | not-accessible | Description | |
| bitstormHp160CfgEnetTrafficDescrEntry | 1.3.6.1.4.1.5504.18.2.8.1 | not-accessible | ||
| I32 bitstormHp160CfgEnetTrafficDescrIndex | 1.3.6.1.4.1.5504.18.2.8.1.1 | Integer32 | not-accessible | 1..16 |
| BIT bitstormHp160CfgEnetTrafficType | 1.3.6.1.4.1.5504.18.2.8.1.2 | BitstormHp160EnetTrafficType | read-write | eNETPKTSHAPINGWFQ(1), eNETPKTSHAPINGPPR(2), eNETPKTSHAPINGCIR(3), eNETPKTSHAPINGCIREIR(4) |
| U32 bitstormHp160CfgEnetTrafficWeight | 1.3.6.1.4.1.5504.18.2.8.1.3 | Unsigned32 | read-write | |
| U32 bitstormHp160CfgEnetTrafficPPR | 1.3.6.1.4.1.5504.18.2.8.1.4 | Unsigned32 | read-write | Peak packet Rate.[bits/second] |
| U32 bitstormHp160CfgEnetTrafficCIR | 1.3.6.1.4.1.5504.18.2.8.1.5 | Unsigned32 | read-write | Committed Information Rate expressed as bits/sec |
| U32 bitstormHp160CfgEnetTrafficEIR | 1.3.6.1.4.1.5504.18.2.8.1.6 | Unsigned32 | read-write | Committed Excess Rate expressed as bits/sec |
| U32 bitstormHp160CfgEnetTrafficCBS | 1.3.6.1.4.1.5504.18.2.8.1.7 | Unsigned32 | read-write | Committed Burst Size in bits |
| U32 bitstormHp160CfgEnetTrafficEBS | 1.3.6.1.4.1.5504.18.2.8.1.8 | Unsigned32 | read-write | Excess Burst Size in bits |
| U32 bitstormHp160CfgEnetTrafficPPRPollingSpeed | 1.3.6.1.4.1.5504.18.2.8.1.9 | Unsigned32 | read-write | Vaule range:1000000-100000000. 2147483648 means Auto Deactivation Mode. |
| U32 bitstormHp160CfgEnetTrafficCIRPollingSpeed | 1.3.6.1.4.1.5504.18.2.8.1.10 | Unsigned32 | read-write | Vaule range:1000000-100000000.. 2147483648 means Auto Deactivation Mode. Currently, Auto Deactivation is not supported. |
| U32 bitstormHp160CfgEnetTrafficEIRPollingSpeed | 1.3.6.1.4.1.5504.18.2.8.1.11 | Unsigned32 | read-write | Vaule range:1000000-100000000. 2147483648 means Auto Deactivation Mode. Currently only Auto-deactivation mode is permitted. |
| BIT bitstormHp160CfgAtmTrafficType | 1.3.6.1.4.1.5504.18.2.8.1.12 | BitstormHp160AtmTrafficType | read-write | atmPolicingCBR(9), atmPolicingUBR2(11) |
| U32 bitstormHp160CfgEnetTrafficPCR | 1.3.6.1.4.1.5504.18.2.8.1.13 | Unsigned32 | read-write | 0-65536, Specified in units of cells/second |
| U32 bitstormHp160CfgEnetTrafficCDVT | 1.3.6.1.4.1.5504.18.2.8.1.14 | Unsigned32 | read-write | 0-65536, Specified in units of 10 ns increments, this field is used by the PCR policing algorithm |
| ROW bitstormHp160CfgEnetTrafficRowStatus | 1.3.6.1.4.1.5504.18.2.8.1.15 | RowStatus | read-create | bitstormHp160CfgEnetTrafficRowStatus. |
| INT bitstormHp160CfgEnetTrafficUsedCount | 1.3.6.1.4.1.5504.18.2.8.1.16 | INTEGER | read-only | The value is not zero means the profile is in used,then the profile can't be delete. |
| bitstormHp160SysMgt | 1.3.6.1.4.1.5504.18.3 | |||
| bitstormHp160SysInventory | 1.3.6.1.4.1.5504.18.3.1 | |||
| OCT bitstormHp160SysInvSWVersion | 1.3.6.1.4.1.5504.18.3.1.1 | OCTET STRING | read-only | The software version of the system. |
| OCT bitstormHp160SysInvFWVersion | 1.3.6.1.4.1.5504.18.3.1.2 | OCTET STRING | read-only | The firmware version of the system. |
| OCT bitstormHp160SysInvHWVersion | 1.3.6.1.4.1.5504.18.3.1.3 | OCTET STRING | read-only | The hardware version of the system. |
| OCT bitstormHp160SysInvModelInfo | 1.3.6.1.4.1.5504.18.3.1.4 | OCTET STRING | read-only | Model information. |
| OCT bitstormHp160SysInvPartNbr | 1.3.6.1.4.1.5504.18.3.1.5 | OCTET STRING | read-only | Part Nbr. |
| OCT bitstormHp160SysInvHWRev | 1.3.6.1.4.1.5504.18.3.1.6 | OCTET STRING | read-only | Hardware Rev. |
| OCT bitstormHp160SysInvSerialNum | 1.3.6.1.4.1.5504.18.3.1.7 | OCTET STRING | read-only | The serial number string for the system. |
| INT bitstormHp160SysInvSplitterType | 1.3.6.1.4.1.5504.18.3.1.8 | INTEGER | read-only | ETSI270-POTS-splitter(0), ANSI600-POTS-splitter(1), ANSI900-POTS-splitter(2), ISDN-splitter(4), No-splitter(7) |
| INT bitstormHp160SysInvCPLDVersion | 1.3.6.1.4.1.5504.18.3.1.9 | INTEGER | read-only | The cpld version of the system card. |
| INT bitstormHp160SysInvCardType | 1.3.6.1.4.1.5504.18.3.1.10 | INTEGER | read-only | The card type of the system card. |
| OCT bitstormHp160SysInvBootLoaderVersion | 1.3.6.1.4.1.5504.18.3.1.11 | OCTET STRING | read-only | The winmon version. |
| INT bitstormHp160SysInvPortCount | 1.3.6.1.4.1.5504.18.3.1.12 | INTEGER | read-only | Port count. |
| bitstormHp160LED | 1.3.6.1.4.1.5504.18.3.2 | |||
| BIT bitstormHp160SysLED | 1.3.6.1.4.1.5504.18.3.2.1 | BitstormHp160LedType | read-only | System LED status of the DSLAM. Normal operation: bitstormHp160LedGreen(2) Self-test fail : bitstormHp160LedRed(1) Power on : bitstormHp160LedYellow(3) |
| BIT bitstormHp160AlmLED | 1.3.6.1.4.1.5504.18.3.2.2 | BitstormHp160LedType | read-only | Alarm LED status for bitstormHp160 of the DSLAM. Normal operation : bitstormHp160LedGreen(2) Major alarm set : bitstormHp160LedRed(1) Minor alarm set : bitstormHp160LedYellow(3) Major and minor alarm set: bitstormHp160LedRedFlash(5) Power on : bitstormHp160LedYellow(3) |
| BIT bitstormHp160Gbe1LED | 1.3.6.1.4.1.5504.18.3.2.3 | BitstormHp160LedType | read-only | GbE1 LED status for bitstormHp160 of the DSLAM. Normal operation : bitstormHp160LedGreen(2) |
| BIT bitstormHp160Gbe2LED | 1.3.6.1.4.1.5504.18.3.2.4 | BitstormHp160LedType | read-only | GbE2 LED status for bitstormHp160 of the DSLAM. Normal operation : bitstormHp160LedGreen(2) |
| bitstormHp160XdslChlLEDTable | 1.3.6.1.4.1.5504.18.3.2.5 | not-accessible | The Channel Led table of system. | |
| bitstormHp160XdslChlLEDEntry | 1.3.6.1.4.1.5504.18.3.2.5.1 | not-accessible | An Entry in the Channel Led table. Support 24 channel. | |
| BIT bitstormHp160xdslChlLEDStatus | 1.3.6.1.4.1.5504.18.3.2.5.1.1 | BitstormHp160LedType | read-only | The LED Status of xDSL Channel Port Normal operation : bitstormHp160LedGreen (2) Port training : bitstormHp160LedGreenFlash (6) Port not provisioned : bitstormHp160LedOff (0) |
| bitstormHp160SysTemperature | 1.3.6.1.4.1.5504.18.3.3 | |||
| I32 bitstormHp160SysTemperatureUpShfThreshold | 1.3.6.1.4.1.5504.18.3.3.1 | Integer32 | read-write | If current temperature exceeds bitstormHp160SysTemperatureUpShfThreshold, Alarm Manager will declare that there is a high temperature alarm after bitstormHp160SysTemperatureUpShfTime seconds. |
| I32 bitstormHp160SysTemperatureDwShfThreshold | 1.3.6.1.4.1.5504.18.3.3.2 | Integer32 | read-write | If current temperature descends below to bitstormHp160SysTemperatureDwShfThreshold, Alarm Manager will declare that there is a lower temperature alarm after bitstormHp160SysTemperatureDwShfTime seconds. |
| I32 bitstormHp160SysTemperatureUpShfTime | 1.3.6.1.4.1.5504.18.3.3.3 | Integer32 | read-write | The bitstormHp160SysTemperatureUpShfTime will start to count when bitstormHp160SysTemperatureValue excessing bitstormHp160SysTemperatureUpShfThreshold. |
| I32 bitstormHp160SysTemperatureDwShfTime | 1.3.6.1.4.1.5504.18.3.3.4 | Integer32 | read-write | The bitstormHp160SysTemperatureDwShfTime will start to count when bitstormHp160SysTemperatureValue excessing bitstormHp160SysTemperatureDwShfThreshold. |
| I32 bitstormHp160SysTemperatureaFanThreshold | 1.3.6.1.4.1.5504.18.3.3.5 | Integer32 | read-write | If Fan temperature exceeds bitstormHp160SysTemperatureaFanThreshold, Fan will be turned on. |
| I32 bitstormHp160SysTemperatureValue | 1.3.6.1.4.1.5504.18.3.3.6 | Integer32 | read-only | The current temperature value. |
| I32 bitstormHp160SysTemperatureDslValue | 1.3.6.1.4.1.5504.18.3.3.7 | Integer32 | read-only | The DSL temperature value. |
| INT bitstormHp160SysSysFanSupported | 1.3.6.1.4.1.5504.18.3.4 | INTEGER | read-only | |
| bitstormHp160MtnMgt | 1.3.6.1.4.1.5504.18.4 | |||
| INT bitstormHp160SystemRestart | 1.3.6.1.4.1.5504.18.4.1 | INTEGER | read-write | Always use active(1) to restart the system. |
| INT bitstormHp160RestartSNMPAgent | 1.3.6.1.4.1.5504.18.4.2 | INTEGER | read-write | SNMP Agent Restart. active: Restart SNMP Agent |
| bitstormHp160MtnFirmware | 1.3.6.1.4.1.5504.18.4.3 | |||
| bitstormHp160MtnRemoteFTPServer | 1.3.6.1.4.1.5504.18.4.3.1 | |||
| ADR bitstormHp160MtnRemoteFTPServerIP | 1.3.6.1.4.1.5504.18.4.3.1.1 | TAddress | read-write | |
| OCT bitstormHp160MtnRemoteFTPUserName | 1.3.6.1.4.1.5504.18.4.3.1.2 | OCTET STRING | read-write | |
| OCT bitstormHp160MtnRemoteFTPPassword | 1.3.6.1.4.1.5504.18.4.3.1.3 | OCTET STRING | read-write | |
| OCT bitstormHp160MtnRemoteFTPFileName | 1.3.6.1.4.1.5504.18.4.3.1.4 | OCTET STRING | read-write | |
| INT bitstormHp160MtnFlashWrite | 1.3.6.1.4.1.5504.18.4.3.2 | INTEGER | read-write | Set this object to active, the system will get image file via ftp and then write the new firmware to the flash and restart itself. Get this object to know the status. The values for setting operations are as follows. 1: aCTIVE(1) The value for status/read operations are as follows: 2: fTPSUCCESS(2) 3: fTPFAIL(3) 4: fTPINPROGRESS(4) 5: fLASHWRITESUCCES(5) 6: fLASHWRITEFAIL(6) 7: fLASHWRITEINPROG(7) |
| INT bitstormHp160MtnBootLoaderUpdate | 1.3.6.1.4.1.5504.18.4.3.3 | INTEGER | read-write | Set this object to active, the system will get bootloader file via ftp and then write the new bootloader to the flash and restart itself. Get this object to know the status. The values for setting operations are as follows. 1: aCTIVE(1) The value for status/read operations are as follows: 2: fTPSUCCESS(2) 3: fTPFAIL(3) 4: fTPINPROGRESS(4) 5: bOOTLOADERWRITESUCCES(5) 6: bOOTLOADERWRITEFAIL(6) 7: bOOTLOADERWRITEINPROG(7) |
| bitstormHp160MtnImageProfileTable | 1.3.6.1.4.1.5504.18.4.3.4 | not-accessible | The Flash Image Profile table. | |
| bitstormHp160MtnImageProfileEntry | 1.3.6.1.4.1.5504.18.4.3.4.1 | not-accessible | An Entry in the ImageProfile table. | |
| I32 bitstormHp160MtnImageProfileIndex | 1.3.6.1.4.1.5504.18.4.3.4.1.1 | Integer32 | read-only | If current temperature exceeds bitstormHp160SysTemperatureUpShfThreshold, Alarm Manager will declare that there is a high temperature alarm after bitstormHp160SysTemperatureUpShfTime seconds. |
| OCT bitstormHp160MtnImageProfileDate | 1.3.6.1.4.1.5504.18.4.3.4.1.2 | OCTET STRING | read-only | Flash image date. |
| OCT bitstormHp160MtnImageProfileVersion | 1.3.6.1.4.1.5504.18.4.3.4.1.3 | OCTET STRING | read-only | Flash image version. |
| OCT bitstormHp160MtnImageProfileDisplayName | 1.3.6.1.4.1.5504.18.4.3.4.1.4 | OCTET STRING | read-only | Flash image display name. |
| INT bitstormHp160MtnActivePartition | 1.3.6.1.4.1.5504.18.4.3.5 | INTEGER | read-write | This object is to select the partition which is active. |
| bitstormHp160MtnSyslog | 1.3.6.1.4.1.5504.18.4.4 | |||
| INT bitstormHp160MtnSyslogService | 1.3.6.1.4.1.5504.18.4.4.1 | INTEGER | read-write | Syslog Service On/Off. enable: service on disable: service off |
| ADR bitstormHp160MtnSyslogServerIP | 1.3.6.1.4.1.5504.18.4.4.2 | TAddress | read-write | The Syslog Server IP. |
| INT bitstormHp160MtnSyslogMaxFileSize | 1.3.6.1.4.1.5504.18.4.4.3 | INTEGER | read-write | The maximum size of the log file for syslog. (16 ~ 1024 KB). |
| bitstormHp160MtnAtmOamLoopbackTest | 1.3.6.1.4.1.5504.18.4.5 | |||
| INT bitstormHp160MtnOAMCellGeneration | 1.3.6.1.4.1.5504.18.4.5.1 | INTEGER | read-write | |
| bitstormHp160MtnAtmLoopbackTable | 1.3.6.1.4.1.5504.18.4.5.2 | not-accessible | The Atm Loopback table. | |
| bitstormHp160MtnAtmLoopbackEntry | 1.3.6.1.4.1.5504.18.4.5.2.1 | not-accessible | An Entry in the AtmLoopback table. | |
| NUM bitstormHp160MtnAtmLoopbackIfIndex | 1.3.6.1.4.1.5504.18.4.5.2.1.1 | InterfaceIndex | not-accessible | AtmLoopback IfIndex. |
| OCT bitstormHp160MtnAtmLoopbackId | 1.3.6.1.4.1.5504.18.4.5.2.1.2 | OCTET STRING | read-create | AtmLoopback Id. |
| INT bitstormHp160MtnAtmIfTestType | 1.3.6.1.4.1.5504.18.4.5.2.1.3 | INTEGER | read-create | Atm If Test Type. |
| INT bitstormHp160MtnAtmIfTestState | 1.3.6.1.4.1.5504.18.4.5.2.1.4 | INTEGER | read-only | Atm If Test State. |
| ROW bitstormHp160MtnAtmRowStatus | 1.3.6.1.4.1.5504.18.4.5.2.1.5 | RowStatus | read-create | Atm If RowStatus. |
| I32 bitstormHp160LineTestResult | 1.3.6.1.4.1.5504.18.4.6 | Integer32 | read-write | bitmap POST : Bit[1..0] --> 0:ALL PASS, 1:TESTING , 2:NO TEST, 3:FATAL ERROR Bit[ 2] Bit[12] Bit[22] BME Status --> 0:READY, 1:NA Bit[ 3] Bit[13] Bit[23] HIC Host-BME Connection Test --> 0:PASS, 1:FAIL Bit[ 4] Bit[14] Bit[24] BME Core & Mem Clk, EMI Initialization --> 0:PASS, 1:FAIL Bit[ 5] Bit[15] Bit[25] HIC PIO SDRAM Read/Write Tests --> 0:PASS, 1:FAIL Bit[ 6] Bit[16] Bit[26] SDRAM Address & Data Bus Connection Tests --> 0:PASS, 1:FAIL Bit[ 7] Bit[17] Bit[27] Memory to Memory BME DMA Tests --> 0:PASS, 1:FAIL Bit[ 8] Bit[18] Bit[28] External Memory Interface Test --> 0:PASS, 1:FAIL Bit[ 9] Bit[19] Bit[29] BME-AFE DDR Bus Connection Tests --> 0:PASS, 1:FAIL Bit[10] Bit[20] Bit[30] AFE Register Read/Write Tests --> 0:PASS, 1:FAIL Bit[11] Bit[21] Bit[31] IFE Register Read/Write Tests --> 0:PASS, 1:FAIL |
| bitstormHp160MtnCliConfig | 1.3.6.1.4.1.5504.18.4.7 | |||
| bitstormHp160MtnCliCfgFTPServer | 1.3.6.1.4.1.5504.18.4.7.1 | |||
| ADR bitstormHp160MtnCliCfgFTPServerIP | 1.3.6.1.4.1.5504.18.4.7.1.1 | TAddress | read-write | |
| OCT bitstormHp160MtnCliCfgFTPUserName | 1.3.6.1.4.1.5504.18.4.7.1.2 | OCTET STRING | read-write | |
| OCT bitstormHp160MtnCliCfgFTPPassword | 1.3.6.1.4.1.5504.18.4.7.1.3 | OCTET STRING | read-write | |
| OCT bitstormHp160MtnCliCfgFTPFileName | 1.3.6.1.4.1.5504.18.4.7.1.4 | OCTET STRING | read-write | |
| INT bitstormHp160MtnCliCfgInbandIndex | 1.3.6.1.4.1.5504.18.4.7.2 | INTEGER | read-write | |
| INT bitstormHp160MtnCliCfgGeneralIndex | 1.3.6.1.4.1.5504.18.4.7.3 | INTEGER | read-write | |
| OCT bitstormHp160MtnCliCfgInbandBackupName | 1.3.6.1.4.1.5504.18.4.7.4 | OCTET STRING | read-write | |
| OCT bitstormHp160MtnCliCfgGeneralBackupName | 1.3.6.1.4.1.5504.18.4.7.5 | OCTET STRING | read-write | |
| INT bitstormHp160MtnCliCfgActionType | 1.3.6.1.4.1.5504.18.4.7.6 | INTEGER | read-write | Action to be taken: CLICONFIG-SAVE: Save database to flash Use cliCfgBackupNameInband with MASK_cliCfgBackupNameInband to specify name for inband database. Use cliCfgBackupNameGeneral with MASK_cliCfgBackupNameGeneral to specify name for general database. -- CLICONFIG-LOAD-NVRAM: -- Load database from flash (used by OAMP internally) -- CLICONFIG-LOAD-INTERNAL: -- Load database from flash (used by OAMP internally) -- CLICONFIG-RESTORE-BY-NAME: -- Restore database with the specific names -- Use cliCfgBackupNameInband with MASK_cliCfgBackupNameInband to specify name for inband database. -- Use cliCfgBackupNameGeneral with MASK_cliCfgBackupNameGeneral to specify name for general database. CLICONFIG-RESTORE-BY-INDEX: Restore database with the specific indexes Use cliCfgParam1 with MASK_cliCfgParam1 to specify index for inband database. Use cliCfgParam2 with MASK_cliCfgParam2 to specify index for general database. CLICONFIG-CLEAR-ALL: Clear Inband/General database CLICONFIG-CLEAR-GENERAL: Clear General database CLICONFIG-EXPORT-BINARY: Export database (binary) -- CLICONFIG-EXPORT-TEXT: -- Export database (text) CLICONFIG-EXPORT-CLI: Export database as a CLI script (gbe ip/netmask,route not exported) CLICONFIG-GET-BINARY: Get binary database image from a FTP server. CLICONFIG-GET-CLI: Get CLI script from a FTP server. CLICONFIG-PUT-BINARY: Put binary database image to a FTP server. CLICONFIG-PUT-CLI: Put CLI script to a FTP server. -- CLICONFIG-IMPORT-BINARY: -- Import from binary database images -- CLICONFIG-IMPORT-CLI: -- Import from a CLI script CLICONFIG-IMPORT-DOWNLOAD-BINARY: As previous CLICONFIG-WRITE-DOWNLOAD. Import from downloaded binary images. CLICONFIG-IMPORT-DOWNLOAD-CLI: Import from download CLI script. CLICONFIG-CHANGE-DETECT Detect database changes, for agents. |
| INT bitstormHp160MtnCliCfgStatus | 1.3.6.1.4.1.5504.18.4.7.7 | INTEGER | read-only | This object is to report the cli configuration status aftert config action. |
| INT bitstormHp160MtnCliCfgConfigUnsaved | 1.3.6.1.4.1.5504.18.4.7.8 | INTEGER | read-only | Must set bitstormHp160MtnCliCfgActionType to CLICONFIG-CHANGE-dETECT(21). After bitstormHp160MtnCliCfgStatus is changed to mEMORYWRITESUCCESS(7), this field is non-zero if there are unsaved database changes. |
| bitstormHp160MtnFlashBackup | 1.3.6.1.4.1.5504.18.4.8 | |||
| bitstormHp160MtnFlashBackupInbandTable | 1.3.6.1.4.1.5504.18.4.8.1 | not-accessible | ||
| bitstormHp160MtnFlashBackupInbandEntry | 1.3.6.1.4.1.5504.18.4.8.1.1 | not-accessible | ||
| INT bitstormHp160MtnFlashBackupInbandIndex | 1.3.6.1.4.1.5504.18.4.8.1.1.1 | INTEGER | not-accessible | |
| OCT bitstormHp160MtnFlashBackupInbandEntryName | 1.3.6.1.4.1.5504.18.4.8.1.1.2 | OCTET STRING | read-only | |
| bitstormHp160MtnFlashBackupGeneralTable | 1.3.6.1.4.1.5504.18.4.8.2 | not-accessible | ||
| bitstormHp160MtnFlashBackupGeneralEntry | 1.3.6.1.4.1.5504.18.4.8.2.1 | not-accessible | ||
| INT bitstormHp160MtnFlashBackupGeneralIndex | 1.3.6.1.4.1.5504.18.4.8.2.1.1 | INTEGER | not-accessible | |
| OCT bitstormHp160MtnFlashBackupGeneralEntryName | 1.3.6.1.4.1.5504.18.4.8.2.1.2 | OCTET STRING | read-only | |
| I32 bitstormHp160MtnFlashBackupInbandActiveIndex | 1.3.6.1.4.1.5504.18.4.8.3 | Integer32 | read-only | |
| I32 bitstormHp160MtnFlashBackupGeneralActiveIndex | 1.3.6.1.4.1.5504.18.4.8.4 | Integer32 | read-only | |
| bitstormHp160AlmMgt | 1.3.6.1.4.1.5504.18.5 | |||
| bitstormHp160AlmMain | 1.3.6.1.4.1.5504.18.5.1 | |||
| BIT bitstormHp160SysAlmStatus | 1.3.6.1.4.1.5504.18.5.1.1 | Bits | read-only | Indicates current system-level alarm state. This is a bit-map of possible conditions. The various bit positions from left to right are: 17 housekeep1Alarm Housekeeping pin 1 detect an alarm input. 18 housekeep2Alarm Housekeeping pin 2 detect an alarm input. 19 housekeep3Alarm Housekeeping pin 3 detect an alarm input. 20 housekeep4Alarm Housekeeping pin 4 detect an alarm input. 21 fanAlarm Fan module reports fan failure. 22 selftestFailAlarm A module reports self-test failure. 23 aboveTempAlarm Temperature above normal. 24 belowTempAlarm Temperature below normal. |
| INT bitstormHp160AlmMajorAlmStatus | 1.3.6.1.4.1.5504.18.5.1.2 | INTEGER | read-only | Major alarm state is detected or not. 0: No major alarm detected 1: Major alarms detected |
| INT bitstormHp160AlmMinorAlmStatus | 1.3.6.1.4.1.5504.18.5.1.3 | INTEGER | read-only | Minor alarm state is detected or not. 0: No minor alarm detected 1: Minor alarms detected |
| INT bitstormHp160AlmCutOff | 1.3.6.1.4.1.5504.18.5.1.4 | INTEGER | read-write | This command allows the ACO to be activated. 0: Alarm cutoff deactive (only for read, not for write) 1: Alarm cutoff active |
| bitstormHp160AlmProfileTable | 1.3.6.1.4.1.5504.18.5.2 | not-accessible | Used to specify alarm log critera. | |
| bitstormHp160AlmProfileEntry | 1.3.6.1.4.1.5504.18.5.2.1 | not-accessible | An Entry in the alarm profile table. | |
| BIT bitstormHp160AlmProfileTypeId | 1.3.6.1.4.1.5504.18.5.2.1.1 | BitstormHp160AlmType | not-accessible | The alarm type identifier number. |
| INT bitstormHp160AlmMask | 1.3.6.1.4.1.5504.18.5.2.1.2 | INTEGER | read-write | This object specifies an alarm for which notification generation is enabled or disabled. 0: Mask the alarm. 1: Non-mask the alarm. |
| INT bitstormHp160AlmLevelSet | 1.3.6.1.4.1.5504.18.5.2.1.3 | INTEGER | read-write | This object specifies the alarm level. 1: Minor 2: Major |
| bitstormHp160AlmCurrentTable | 1.3.6.1.4.1.5504.18.5.3 | not-accessible | The current alarm table. | |
| bitstormHp160AlmCurrentEntry | 1.3.6.1.4.1.5504.18.5.3.1 | not-accessible | An Entry in the current alarm table. | |
| PHY bitstormHp160AlmCurrentEntPhyIndex | 1.3.6.1.4.1.5504.18.5.3.1.1 | PhysicalIndex | read-only | This attribute indicates the suffered entity by the entPhysicalIndex. |
| NUM bitstormHp160AlmCurrentIfIndex | 1.3.6.1.4.1.5504.18.5.3.1.2 | InterfaceIndex | read-only | This attribute indicates the suffered interface index by ifIndex. |
| BIT bitstormHp160AlmCurrentTypeId | 1.3.6.1.4.1.5504.18.5.3.1.3 | BitstormHp160AlmType | read-only | This attribute indicates the suffered alarm type name. |
| INT bitstormHp160AlmCurrentLevel | 1.3.6.1.4.1.5504.18.5.3.1.4 | INTEGER | read-only | This attribute indicates the alarm level specified by alarm profile. 1: Minor 2: Major |
| INT bitstormHp160AlmCurrentState | 1.3.6.1.4.1.5504.18.5.3.1.5 | INTEGER | read-only | This attribute indicates the alarm occurrence. 1: Alarm has not occurred 2: Alarm has occurred-----by current alarm table definition, this attribute will be always this value. |
| OCT bitstormHp160AlmCurrentTime | 1.3.6.1.4.1.5504.18.5.3.1.6 | OCTET STRING | read-only | This attribute indicates the alarm occurence time of the current alarm table. |
| bitstormHp160AlmTable | 1.3.6.1.4.1.5504.18.5.4 | not-accessible | The alarm log table. | |
| bitstormHp160AlmEntry | 1.3.6.1.4.1.5504.18.5.4.1 | not-accessible | An Entry in the alarm log table. | |
| I32 bitstormHp160AlmSeqId | 1.3.6.1.4.1.5504.18.5.4.1.1 | Integer32 | read-only | This object is used by the alarm log table to identify the row of this table. To check new row number for a new alarm occurrence, just obtain this value by bitstormHp160AlmSeqIdNext. |
| PHY bitstormHp160AlmEntPhyIndex | 1.3.6.1.4.1.5504.18.5.4.1.2 | PhysicalIndex | read-only | This attribute indicates the suffered entity by its entPhysicalIndex. |
| NUM bitstormHp160AlmIfIndex | 1.3.6.1.4.1.5504.18.5.4.1.3 | InterfaceIndex | read-only | This attribute indicates the suffered interface by its ifIndex. |
| BIT bitstormHp160AlmTypeId | 1.3.6.1.4.1.5504.18.5.4.1.4 | BitstormHp160AlmType | read-only | This attribute indicates the suffered alarm type name. |
| INT bitstormHp160AlmLevel | 1.3.6.1.4.1.5504.18.5.4.1.5 | INTEGER | read-only | This attribute indicates the suffered alarm level defined by the alarm profile. 1: Minor 2: Major |
| INT bitstormHp160AlmState | 1.3.6.1.4.1.5504.18.5.4.1.6 | INTEGER | read-only | This attribute indicates the alarm occurrence or disappearance. 1: Alarm has not occurred 2: Alarm has occurred |
| OCT bitstormHp160AlmTime | 1.3.6.1.4.1.5504.18.5.4.1.7 | OCTET STRING | read-only | This attributes indicates the alarm occurence time. |
| I32 bitstormHp160AlmSeqIdNext | 1.3.6.1.4.1.5504.18.5.5 | Integer32 | read-only | 1. This object contains an appropriate value to be used for bitstormHp160AlmSeqId when creating entries in the bitstormHp160AlmTable by agent itself. 2.This indicates the next sequential number used by the alarm table. |
| bitstormHp160AlmEventTable | 1.3.6.1.4.1.5504.18.5.6 | not-accessible | The Event Log table. | |
| bitstormHp160AlmEventEntry | 1.3.6.1.4.1.5504.18.5.6.1 | not-accessible | An Entry in the Event table. | |
| I32 bitstormHp160AlmEventSeqId | 1.3.6.1.4.1.5504.18.5.6.1.1 | Integer32 | read-only | This object is used by the event table to identify the row of this table, when creating a new row in the table by SNMP Agent itself. |
| PHY bitstormHp160AlmEventEntPhyIndex | 1.3.6.1.4.1.5504.18.5.6.1.2 | PhysicalIndex | read-only | This attribute indicates the occurrence entity by entPhysicalIndex. |
| NUM bitstormHp160AlmEventIfIndex | 1.3.6.1.4.1.5504.18.5.6.1.3 | InterfaceIndex | read-only | This attribute indicates the occurrence interface by ifIndex. |
| BIT bitstormHp160AlmEventTypeId | 1.3.6.1.4.1.5504.18.5.6.1.4 | BitstormHp160EventType | read-only | This command indicates the event type name. |
| OCT bitstormHp160AlmEventName | 1.3.6.1.4.1.5504.18.5.6.1.5 | OCTET STRING | read-only | This attribute indicates the event name of the event table. |
| OCT bitstormHp160AlmEventTime | 1.3.6.1.4.1.5504.18.5.6.1.6 | OCTET STRING | read-only | This attribute indicates the event occurence time of the event table. |
| I32 bitstormHp160AlmEventSeqIdNext | 1.3.6.1.4.1.5504.18.5.7 | Integer32 | read-only | 1.This object contains an appropriate value to be used for bitstormHp160AlmEventSeqId when creating entries in the bitstormHp160AlmEventTable. 2.This indicates the next sequential number used by the Event log table. 3.When wrote to 0, this indicates almLogTable will be clear. |
| INT bitstormHp160AlmClear | 1.3.6.1.4.1.5504.18.5.8 | INTEGER | read-write | clear syatem alarm log. |
| INT bitstormHp160AlmEventClear | 1.3.6.1.4.1.5504.18.5.9 | INTEGER | read-write | clear syatem event log. |
| bitstormHp160PerfMgt | 1.3.6.1.4.1.5504.18.6 | |||
| bitstormHp160TrapMgt | 1.3.6.1.4.1.5504.18.7 | |||
| bitstormHp160Traps | 1.3.6.1.4.1.5504.18.7.1 | |||
| bitstormHp160TrapAlarmPrefix | 1.3.6.1.4.1.5504.18.7.1.1 | |||
| bitstormHp160SystemAlarmTrap | 1.3.6.1.4.1.5504.18.7.1.1.1 | |||
| NTF bitstormHp160TrapAlmSystemHousekeep1 | 1.3.6.1.4.1.5504.18.7.1.1.1.1 | DSLAM system housekeeping1 trap. | ||
| NTF bitstormHp160TrapAlmSystemHousekeep2 | 1.3.6.1.4.1.5504.18.7.1.1.1.2 | DSLAM system housekeeping2 trap. | ||
| NTF bitstormHp160TrapAlmSystemHousekeep3 | 1.3.6.1.4.1.5504.18.7.1.1.1.3 | DSLAM system housekeeping3 trap. | ||
| NTF bitstormHp160TrapAlmSystemHousekeep4 | 1.3.6.1.4.1.5504.18.7.1.1.1.4 | DSLAM system housekeeping4 trap. | ||
| NTF bitstormHp160TrapAlmSystemFanFailure | 1.3.6.1.4.1.5504.18.7.1.1.1.5 | DSLAM fan failure alarm trap. | ||
| NTF bitstormHp160TrapAlmSystemSelfTestTestFail | 1.3.6.1.4.1.5504.18.7.1.1.1.6 | DSLAM system module test fail trap. | ||
| NTF bitstormHp160TrapAlmSystemAboveTemperature | 1.3.6.1.4.1.5504.18.7.1.1.1.7 | The current temperature exceeds bitstormHp160SysTemperatureUpShfThreshold. | ||
| NTF bitstormHp160TrapAlmSystemBelowTemperature | 1.3.6.1.4.1.5504.18.7.1.1.1.8 | The current temperature descends below to bitstormHp160SysTemperatureDwShfThreshold. | ||
| bitstormHp160GBEAlarmTrap | 1.3.6.1.4.1.5504.18.7.1.1.2 | |||
| bitstormHp160VDSLAlarmTrap | 1.3.6.1.4.1.5504.18.7.1.1.3 | |||
| NTF bitstormHp160TrapAlmVdslLOF | 1.3.6.1.4.1.5504.18.7.1.1.3.1 | Loss of frame of the DSLAM VDSL interface. | ||
| NTF bitstormHp160TrapAlmVdslLOS | 1.3.6.1.4.1.5504.18.7.1.1.3.2 | Loss of signal of the DSLAM VDSL interface. | ||
| NTF bitstormHp160TrapAlmVdslLOSQ | 1.3.6.1.4.1.5504.18.7.1.1.3.3 | Loss of signal quality of the DSLAM VDSL interface. | ||
| NTF bitstormHp160TrapAlmVdslLOL | 1.3.6.1.4.1.5504.18.7.1.1.3.4 | Loss of link of the DSLAM VDSL interface. | ||
| NTF bitstormHp160TrapAlmVdslInitFailure | 1.3.6.1.4.1.5504.18.7.1.1.3.5 | VDSL Init Failure. | ||
| NTF bitstormHp160TrapAlmVdslESE | 1.3.6.1.4.1.5504.18.7.1.1.3.8 | VDSL Excessive Severely Errored Seconds of the VDSL interface. | ||
| NTF bitstormHp160TrapAlmVdslNCDSlow | 1.3.6.1.4.1.5504.18.7.1.1.3.9 | VDSL No Cell Delination on the slow channel | ||
| NTF bitstormHp160TrapAlmVdslLCDSlow | 1.3.6.1.4.1.5504.18.7.1.1.3.10 | VDSL Loss of Cell Delination on the slow channel | ||
| NTF bitstormHp160TrapAlmVdslNCDFast | 1.3.6.1.4.1.5504.18.7.1.1.3.11 | VDSL No Cell Delination on the fast channel | ||
| NTF bitstormHp160TrapAlmVdslLCDFast | 1.3.6.1.4.1.5504.18.7.1.1.3.12 | VDSL Loss of Cell Delination on the fast channel | ||
| NTF bitstormHp160TrapAlmVdslLOFFE | 1.3.6.1.4.1.5504.18.7.1.1.3.13 | Loss of frame in the downstream direction. | ||
| NTF bitstormHp160TrapAlmVdslLOSFE | 1.3.6.1.4.1.5504.18.7.1.1.3.14 | Loss of signal in the downstream direction. | ||
| NTF bitstormHp160TrapAlmVdslLPRFE | 1.3.6.1.4.1.5504.18.7.1.1.3.15 | Loss of power in the downstream direction. | ||
| NTF bitstormHp160TrapAlmVdslLOSQFE | 1.3.6.1.4.1.5504.18.7.1.1.3.16 | Loss of signal quality in the downstream direction. | ||
| NTF bitstormHp160TrapAlmVdslNoPeerVtuPresentFE | 1.3.6.1.4.1.5504.18.7.1.1.3.17 | VDSL No Peer Vtu Present in the downstream direction. | ||
| NTF bitstormHp160TrapAlmVdslESEFE | 1.3.6.1.4.1.5504.18.7.1.1.3.18 | VDSL Excessive Severely Errored Seconds in the downstream direction. | ||
| NTF bitstormHp160TrapAlmVdslNCDSlowFE | 1.3.6.1.4.1.5504.18.7.1.1.3.19 | VDSL FE No Cell Delination on the slow channel | ||
| NTF bitstormHp160TrapAlmVdslLCDSlowFE | 1.3.6.1.4.1.5504.18.7.1.1.3.20 | VDSL FE Loss of Cell Delination on the slow channel | ||
| NTF bitstormHp160TrapAlmVdslNCDFastFE | 1.3.6.1.4.1.5504.18.7.1.1.3.21 | VDSL FE No Cell Delination on the fast channel | ||
| NTF bitstormHp160TrapAlmVdslLCDFastFE | 1.3.6.1.4.1.5504.18.7.1.1.3.22 | VDSL FE Loss of Cell Delination on the fast channel | ||
| bitstormHp160TrapEventPrefix | 1.3.6.1.4.1.5504.18.7.1.2 | |||
| bitstormHp160SystemEventTrap | 1.3.6.1.4.1.5504.18.7.1.2.1 | |||
| bitstormHp160ATMEventTrap | 1.3.6.1.4.1.5504.18.7.1.2.2 | |||
| bitstormHp160XDSLEventTrap | 1.3.6.1.4.1.5504.18.7.1.2.3 | |||
| bitstormHp160VDSLEventTrap | 1.3.6.1.4.1.5504.18.7.1.2.4 |
RFC description
Manages Zhone BITSTORM-HP-160 device configuration, alarms, and performance metrics.
Start monitoring Zhone Technologies Bitstorm HP-160 IP-DSLAM equipment (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.