TPT-HOST-MIB

All MIBs › TPT-HOST-MIB

Organization: Trend Micro, Inc.

Last Updated: 2016-05-25

Category: Firewall and Intrusion Prevention

Description: Manages TippingPoint IPS host system information, OS version, and platform identification.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is TPT-HOST-MIB?

TPT-HOST-MIB is a Trend Micro TippingPoint MIB that describes the management-port host configuration of an IPS appliance. It exposes networking and platform configuration data: IP addressing (IPv4/IPv6) for the management interface, gateway settings, IPv6 auto-configuration state, and FIPS compliance mode. Its monitoring value is primarily configuration/software-status oriented, letting administrators confirm the management interface is correctly addressed and reachable, and that the device's FIPS cryptographic mode matches compliance requirements, which is a software/security posture check rather than a hardware health check. It complements other TippingPoint MIBs (such as TPT-BAY-MIB for hardware and TPT-TSE-MIB for inspection engine data) to give a fuller device picture. It is deployed in enterprise security environments, especially regulated ones, where FIPS mode and management connectivity of TippingPoint IPS appliances must be verified via SNMP. Engineers can download the TPT-HOST-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in TPT-HOST-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

TippingPoint (Trend Micro) IPS appliance

Monitoring Examples

An admin would poll hostIpTable/hostIpEntry (indexed by hostIpIndex) to see each configured management IP address, its type, and whether it is hostIpActive, alongside hostIPv4Gateway/hostIPv6Gateway to confirm gateway reachability. Checking hostFipsMode and hostFipsCfgMode would confirm whether the appliance is running in FIPS-compliant cryptographic mode, which matters for regulated deployments. A management IP shown as inactive would explain a loss of SNMP/management connectivity to the appliance.

What Can Be Monitored

management port IP address(es)
IPv4/IPv6 gateway configuration
IPv6 auto-configuration state
management IP active status
FIPS compliance mode

Imported Objects

From SNMPv2-SMI

MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

TEXTUAL-CONVENTION

From TPT-TPAMIBS-MIB

tpt-tpa-objs

OIDs

OID symbolic	OID numeric	Type	Access	Description
tpt_host_objs	1.3.6.1.4.1.10734.3.3.2.12			Host information for the management port on the device. Copyright (C) 2016 Trend Micro Incorporated. All Rights Reserved. Trend Micro makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Trend Micro shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. This document contains proprietary information, which is protected by copyright. No part of this document may be photocopied, reproduced, or translated into another language without the prior written consent of Trend Micro. The information is provided 'as is' without warranty of any kind and is subject to change without notice. The only warranties for Trend Micro products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. Trend Micro shall not be liable for technical or editorial errors or omissions contained herein. TippingPoint(R), the TippingPoint logo, and Digital Vaccine(R) are registered trademarks of Trend Micro. All other company and product names may be trademarks of their respective holders. All rights reserved. This document contains confidential information, trade secrets or both, which are the property of Trend Micro. No part of this documentation may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation, or adaptation) without written permission from Trend Micro or one of its subsidiaries. All other company and product names may be trademarks of their respective holders.
hostIpTable	1.3.6.1.4.1.10734.3.3.2.12.1		not-accessible	Table of IP addresses on the device and their attributes.
hostIpEntry	1.3.6.1.4.1.10734.3.3.2.12.1.1		not-accessible	An entry in the host IP address table. Rows cannot be created or deleted.
U32 hostIpIndex	1.3.6.1.4.1.10734.3.3.2.12.1.1.1	Unsigned32	not-accessible	Index into the IP address table, starting with 1.
OCT hostIpAddress	1.3.6.1.4.1.10734.3.3.2.12.1.1.2	OCTET STRING	read-only	String representation of an IP address, in CIDR format.
ADR hostIpType	1.3.6.1.4.1.10734.3.3.2.12.1.1.3	IpAddressType	read-only	Whether this IP address is IPv4 or IPv6 and how it was configured.
ACT hostIpActive	1.3.6.1.4.1.10734.3.3.2.12.1.1.4	ActiveOrNot	read-only	Whether this IP address is active.
OCT hostIPv4Gateway	1.3.6.1.4.1.10734.3.3.2.12.2	OCTET STRING	read-only	The IPv4 default gateway.
OCT hostIPv6Gateway	1.3.6.1.4.1.10734.3.3.2.12.3	OCTET STRING	read-only	The IPv6 default gateway.
ENA hostIPv6Enabled	1.3.6.1.4.1.10734.3.3.2.12.4	EnabledOrNot	read-only	Whether IPv6 is enabled on the device.
ENA hostIPv6AutoConfig	1.3.6.1.4.1.10734.3.3.2.12.5	EnabledOrNot	read-only	Whether IPv6 autoconfig is enabled on the device.
FIP hostFipsCfgMode	1.3.6.1.4.1.10734.3.3.2.12.6	FipsMode	read-only	The configured FIPS mode.
FIP hostFipsMode	1.3.6.1.4.1.10734.3.3.2.12.7	FipsMode	read-only	The currently active FIPS mode.
ACT hostSSLCert	1.3.6.1.4.1.10734.3.3.2.12.8	ActiveCert	read-only	The currently active SSL cert.
INI hostInitState	1.3.6.1.4.1.10734.3.3.2.12.9	InitState	read-only	The current host initialization state.

RFC description

Reports management port host information and network configuration for Trend Micro security devices.

Start monitoring TippingPoint (Trend Micro) IPS appliance (management-port IP/FIPS-mode config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download TPT-HOST-MIB

What Is TPT-HOST-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description