TPLINK-SNMPNOTIFICATIONHOST-MIB

All MIBs › TPLINK-SNMPNOTIFICATIONHOST-MIB

Category: SNMP Management

Description: Manages TP-Link switch SNMP notification host addresses, versions, and trap/inform settings.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is TPLINK-SNMPNOTIFICATIONHOST-MIB?

TPLINK-SNMPNOTIFICATIONHOST-MIB is a TP-Link proprietary module for configuring the destination hosts to which the switch sends SNMP traps and informs, including target addresses, SNMP versions, and notification type settings. It exposes configuration objects that let administrators register one or more network management stations as recipients for the device's SNMP notifications. Its monitoring purpose is configuration/service status oriented, ensuring that the switch's fault and event notifications are correctly routed to the intended management system rather than reporting on hardware sensors itself; it is foundational infrastructure that enables all other trap-based fault detection on the device to reach an NMS. It naturally depends on standard SNMP notification MIBs (SNMPv2-MIB/SNMP-TARGET-MIB conventions) for the underlying trap delivery mechanism. It is deployed on TP-Link managed switches in any environment using centralized SNMP trap collection for network fault management, and administrators can download the TPLINK-SNMPNOTIFICATIONHOST-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in TPLINK-SNMPNOTIFICATIONHOST-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

TP-Link managed switch

Monitoring Examples

No sample object or table names were provided in the source for this module, so a concrete polling example naming specific objects cannot be honestly constructed here; in practice an administrator would be expected to poll the notification host table to confirm the correct target IP address, SNMP version, and community/credentials are configured, flagging a missing or incorrect host entry as the reason a management station is not receiving expected traps from the device.

Imported Objects

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From SNMPv2-SMI

IpAddress
OBJECT-TYPE

From TPLINK-SNMP-MIB

tplinkSnmpMIBObjects

OBJECT-IDENTITY

From TPLINK-TC-MIB

TPRowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
tpSnmpNotificationHost	1.3.6.1.4.1.11863.6.32.1.1
tpSnmpNotificationHostTable	1.3.6.1.4.1.11863.6.32.1.1.1		not-accessible	A list of SNMP notification host control entries.
tpSnmpNotificationHostEntry	1.3.6.1.4.1.11863.6.32.1.1.1.1		not-accessible	With the Notification function enabled, the switch can initiatively report to the management station about the important events that occur on the Views, which allows the management station to monitor and process the events in time.
IP tpSnmpNotificationHostIpAddr	1.3.6.1.4.1.11863.6.32.1.1.1.1.1	IpAddress	read-only	IP Address of the management Host.
OCT tpSnmpNotificationHostUserName	1.3.6.1.4.1.11863.6.32.1.1.1.1.2	OCTET STRING	read-only	The User name of the management station.
INT tpSnmpNotificationHostUDPPort	1.3.6.1.4.1.11863.6.32.1.1.1.1.3	INTEGER	read-create	The number of the UDP port used to send notifications. The UDP port functions with the IP address for the notification sending. The default is 162.
INT tpSnmpNotificationHostSecMode	1.3.6.1.4.1.11863.6.32.1.1.1.1.4	INTEGER	read-create	The Security Model of the management station. v1(1),SNMPv1 is defined for the notify. v2c(2),SNMPv2c is defined for the notify. v3(3),SNMPv3 is defined for the notify.
INT tpSnmpNotificationHostSecLev	1.3.6.1.4.1.11863.6.32.1.1.1.1.5	INTEGER	read-create	The Security Level for the SNMP v3 User. noAuthNoPriv(1),No authentication and no privacy security level are used. authNoPriv(2),Only the authentication security level is used. authPriv(3),Both the authentication and the privacy security levels are used.
INT tpSnmpNotificationHostNtfyType	1.3.6.1.4.1.11863.6.32.1.1.1.1.6	INTEGER	read-create	The type for the notifications. trap(1),Indicates traps are sent. inform(2),Indicates informs are sent. The Inform type has a higher security than the Trap type.
INT tpSnmpNotificationHostRetry	1.3.6.1.4.1.11863.6.32.1.1.1.1.7	INTEGER	read-create	Specify the amount of times the switch resends an inform request. The switch will resend the inform request if it doesn't get the response from the management station during the Timeout interval, and it will terminate resending the inform request if the resending times reach the specified Retry times. Its value range is 1-255.
INT tpSnmpNotificationHostTimeout	1.3.6.1.4.1.11863.6.32.1.1.1.1.8	INTEGER	read-create	Specify the maximum time for the switch to wait for the response from the management station before resending a request. Its value range is 1-3600.
TPR tpSnmpNotificationHostRowStatus	1.3.6.1.4.1.11863.6.32.1.1.1.1.9	TPRowStatus	read-create	The status column has three defined values: - `active(1)', which indicates that the conceptual row is available for using by the managed device; - `createAndGo(4)', which is supplied by a management station wishing to create a new instance of a conceptual row and to have its status automatically set to active, making it available for using by the managed device; - `destroy(6)', which is supplied by a management station wishing to delete all of the instances associated with an existing conceptual row.
tpSnmpNotificationHostV6Table	1.3.6.1.4.1.11863.6.32.1.1.2		not-accessible	A list of SNMP notification host control entries, supports IPV6.
tpSnmpNotificationHostV6Entry	1.3.6.1.4.1.11863.6.32.1.1.2.1		not-accessible	With the Notification function enabled, the switch can initiatively report to the management station about the important events that occur on the Views, which allows the management station to monitor and process the events in time.
INT tpSnmpNotificationHostV6Index	1.3.6.1.4.1.11863.6.32.1.1.2.1.1	INTEGER	not-accessible	The index to the conceptual row of the table. Negative numbers are not allowed. There are objects defined that point to conceptual rows of this table with this index value. Zero is used to denote that no corresponding row exists. Index values are assigned by the agent, and should not be reused but should continue to increase in value.
IPt tpSnmpNotificationHostV6IpMode	1.3.6.1.4.1.11863.6.32.1.1.2.1.2	InetAddressType	read-only	The type of IP address.Type is IPv4 or IPv6
IP tpSnmpNotificationHostV6IpAddr	1.3.6.1.4.1.11863.6.32.1.1.2.1.3	InetAddress	read-create	IP Address of the management Host. Just input like a string.
OCT tpSnmpNotificationHostV6UserName	1.3.6.1.4.1.11863.6.32.1.1.2.1.4	OCTET STRING	read-create	The User name of the management station.
INT tpSnmpNotificationHostV6UDPPort	1.3.6.1.4.1.11863.6.32.1.1.2.1.5	INTEGER	read-create	The number of the UDP port used to send notifications. The UDP port functions with the IP address for the notification sending. The default is 162.
INT tpSnmpNotificationHostV6SecMode	1.3.6.1.4.1.11863.6.32.1.1.2.1.6	INTEGER	read-create	The Security Model of the management station. v1(1),SNMPv1 is defined for the notify. v2c(2),SNMPv2c is defined for the notify. v3(3),SNMPv3 is defined for the notify.
INT tpSnmpNotificationHostV6SecLev	1.3.6.1.4.1.11863.6.32.1.1.2.1.7	INTEGER	read-create	The Security Level for the SNMP v3 User. noAuthNoPriv(1),No authentication and no privacy security level are used. authNoPriv(2),Only the authentication security level is used. authPriv(3),Both the authentication and the privacy security levels are used.
INT tpSnmpNotificationHostV6NtfyType	1.3.6.1.4.1.11863.6.32.1.1.2.1.8	INTEGER	read-create	The type for the notifications. trap(1),Indicates traps are sent. inform(2),Indicates informs are sent. The Inform type has a higher security than the Trap type.
INT tpSnmpNotificationHostV6Retry	1.3.6.1.4.1.11863.6.32.1.1.2.1.9	INTEGER	read-create	Specify the amount of times the switch resends an inform request. The switch will resend the inform request if it doesn't get the response from the management station during the Timeout interval, and it will terminate resending the inform request if the resending times reach the specified Retry times. Its value range is 1-255.
INT tpSnmpNotificationHostV6Timeout	1.3.6.1.4.1.11863.6.32.1.1.2.1.10	INTEGER	read-create	Specify the maximum time for the switch to wait for the response from the management station before resending a request. Its value range is 1-3600.
TPR tpSnmpNotificationHostV6RowStatus	1.3.6.1.4.1.11863.6.32.1.1.2.1.11	TPRowStatus	read-create	The status column has three defined values: - `active(1)', which indicates that the conceptual row is available for using by the managed device; - `createAndGo(4)', which is supplied by a management station wishing to create a new instance of a conceptual row and to have its status automatically set to active, making it available for using by the managed device; - `destroy(6)', which is supplied by a management station wishing to delete all of the instances associated with an existing conceptual row.

RFC description

Manages SNMP notification hosts for switches to send important events to management stations for monitoring.

Start monitoring TP-Link managed switch (SNMP notification-host destination config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download TPLINK-SNMPNOTIFICATIONHOST-MIB

What Is TPLINK-SNMPNOTIFICATIONHOST-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description