TPLINK-IPADDR-MIB

All MIBs › TPLINK-IPADDR-MIB

Organization: TPLINK

Last Updated: 2012-12-13

Category: Network Interface Management

Description: Manages TP-Link switch interface IP address assignment, subnet mask, and routing configuration.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is TPLINK-IPADDR-MIB?

TPLINK-IPADDR-MIB is a TP-LINK proprietary MIB configuring IP addressing across VLAN, loopback, and routed-port interfaces. Its VLAN-interface table, keyed by VLAN ID, records secondary flag, mode, IP address/mask, name, and status; a loopback-interface table mirrors the same fields keyed by loopback ID; and a routed-port table records the same fields keyed by port. As a configuration MIB it lets an administrator confirm IP addressing across VLAN/loopback/routed-port interfaces on a TP-LINK Layer 3 switch. It is deployed on TP-LINK Layer 3 switching equipment (IP addressing). Engineers can download the TPLINK-IPADDR-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in TPLINK-IPADDR-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

TP-LINK Layer 3 switching equipment (IP addressing)

Monitoring Examples

An administrator checks tpVlanInterfaceIp and tpRoutedPortIp to confirm IP addressing across VLAN and routed-port interfaces on a TP-LINK Layer 3 switch.

What Can Be Monitored

VLAN/loopback/routed-port IP address configuration

Imported Objects

From RFC1213-MIB

ifIndex

From SNMPv2-SMI

IpAddress
OBJECT-TYPE

From TPLINK-MIB

tplinkMgmt

OBJECT-IDENTITY

From TPLINK-TC-MIB

TPRowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
tplinkIpAddrMIB	1.3.6.1.4.1.11863.6.6			Private MIB for ip address configuration.
tplinkIpAddrMIBObjects	1.3.6.1.4.1.11863.6.6.1
tpInterfaceConfig	1.3.6.1.4.1.11863.6.6.1.1
tpVlanInterfaceTable	1.3.6.1.4.1.11863.6.6.1.1.1		not-accessible	A list of VLAN interface entries. VLAN interface is a virtual interface which is working in the level 3, it is used to communicate between the VLAN in the level 3, and it is not a physical entity in the device. Each VLAN has a VLAN interface,and the VLAN interface can transmit the packets for the port which belong to this VLAN. In general,because the VLAN can isolate broadcast, each VLAN has a subnet address,and as a gateway of the subnet address, the VLAN interface can do the transmittance basic of IP address in level 3 for the packet which need to span the subnet address.
tpVlanInterfaceConfigEntry	1.3.6.1.4.1.11863.6.6.1.1.1.1		not-accessible	The interface can be added or removed .
INT tpVlanInterfaceVlanId	1.3.6.1.4.1.11863.6.6.1.1.1.1.1	INTEGER	read-only	The id of the VLAN interface,and it must be in the 802.1Q VLAN of the ingress port.
INT tpVlanInterfaceSecondary	1.3.6.1.4.1.11863.6.6.1.1.1.1.2	INTEGER	read-only	If the ip address is secondary IP.
NUM tpVlanInterfaceMode	1.3.6.1.4.1.11863.6.6.1.1.1.1.3	TpInterfaceMode	read-create	The IP address alloc-mode of VLAN interface.
IP tpVlanInterfaceIp	1.3.6.1.4.1.11863.6.6.1.1.1.1.4	IpAddress	read-only	The IP address of the VLAN interface.
IP tpVlanInterfaceMsk	1.3.6.1.4.1.11863.6.6.1.1.1.1.5	IpAddress	read-create	The IP mask of the VLAN interface.
OCT tpVlanInterfaceName	1.3.6.1.4.1.11863.6.6.1.1.1.1.6	OCTET STRING	read-create	The name of the VLAN interface.
TPR tpVlanInterfaceStatus	1.3.6.1.4.1.11863.6.6.1.1.1.1.7	TPRowStatus	read-create	The following values are states: these values may be used as follow: active(1),if the entry is being used. notInService(2),destory the entry. notReady(3),destory the entry. createAndGo(4),not being used createAndWait(5),creat a new entry destroy(6),destory the entry.
tpLoopbackInterfaceTable	1.3.6.1.4.1.11863.6.6.1.1.2		not-accessible	A list of Loopback interface entries. Loopback interface is a virtual interface which purely software implemented, commonly used as router-id or network test.
tpLoopbackInterfaceConfigEntry	1.3.6.1.4.1.11863.6.6.1.1.2.1		not-accessible	The interface can be added or removed .
INT tpLoopbackInterfaceId	1.3.6.1.4.1.11863.6.6.1.1.2.1.1	INTEGER	read-only	The id of the loopback interface (1-2147483647).
INT tpLoopbackInterfaceSecondary	1.3.6.1.4.1.11863.6.6.1.1.2.1.2	INTEGER	read-only	If the ip address is secondary IP.
NUM tpLoopbackInterfaceMode	1.3.6.1.4.1.11863.6.6.1.1.2.1.3	TpInterfaceMode2	read-create	The IP address alloc-mode of loopback interface.
IP tpLoopbackInterfaceIp	1.3.6.1.4.1.11863.6.6.1.1.2.1.4	IpAddress	read-only	The IP address of the loopback interface.
IP tpLoopbackInterfaceMsk	1.3.6.1.4.1.11863.6.6.1.1.2.1.5	IpAddress	read-create	The IP mask of the loopback interface.
OCT tpLoopbackInterfaceName	1.3.6.1.4.1.11863.6.6.1.1.2.1.6	OCTET STRING	read-create	The name of the loopback interface.
TPR tpLoopbackInterfaceStatus	1.3.6.1.4.1.11863.6.6.1.1.2.1.7	TPRowStatus	read-create	Action status.
tpRoutedPortTable	1.3.6.1.4.1.11863.6.6.1.1.3		not-accessible	A list of routed port. A routed port is special port mode which you can configure Layer 3 function like RIP, OSPF, while some Layer 2 function like speed, flow-control is also available.
tpRoutedPortConfigEntry	1.3.6.1.4.1.11863.6.6.1.1.3.1		not-accessible	The interface can be added or removed .
OCT tpRoutedPortId	1.3.6.1.4.1.11863.6.6.1.1.3.1.1	OCTET STRING	read-only	The port id.
INT tpRoutedPortSecondary	1.3.6.1.4.1.11863.6.6.1.1.3.1.2	INTEGER	read-only	If the ip address is secondary IP.
NUM tpRoutedPortMode	1.3.6.1.4.1.11863.6.6.1.1.3.1.3	TpInterfaceMode	read-create	The IP address alloc-mode of the routed port.
IP tpRoutedPortIp	1.3.6.1.4.1.11863.6.6.1.1.3.1.4	IpAddress	read-only	The IP address of the routed port.
IP tpRoutedPortMsk	1.3.6.1.4.1.11863.6.6.1.1.3.1.5	IpAddress	read-create	The IP mask of the routed port.
OCT tpRoutedPortName	1.3.6.1.4.1.11863.6.6.1.1.3.1.6	OCTET STRING	read-create	The name of the routed port.
TPR tpRoutedPortStatus	1.3.6.1.4.1.11863.6.6.1.1.3.1.7	TPRowStatus	read-create	Action status.
tpPortChannelTable	1.3.6.1.4.1.11863.6.6.1.1.4		not-accessible	A list of port-channel interface entries.
tpPortChannelConfigEntry	1.3.6.1.4.1.11863.6.6.1.1.4.1		not-accessible	The interface can be added or removed .
INT tpPortChannelId	1.3.6.1.4.1.11863.6.6.1.1.4.1.1	INTEGER	read-only	The id of the port-channel interface.
INT tpPortChannelSecondary	1.3.6.1.4.1.11863.6.6.1.1.4.1.2	INTEGER	read-only	If the ip address is secondary IP.
NUM tpPortChannelMode	1.3.6.1.4.1.11863.6.6.1.1.4.1.3	TpInterfaceMode	read-create	The IP address alloc-mode of port-channel interface.
IP tpPortChannelIp	1.3.6.1.4.1.11863.6.6.1.1.4.1.4	IpAddress	read-only	The IP address of the port-channel interface.
IP tpPortChannelMsk	1.3.6.1.4.1.11863.6.6.1.1.4.1.5	IpAddress	read-create	The IP mask of the port-channel interface.
OCT tpPortChannelName	1.3.6.1.4.1.11863.6.6.1.1.4.1.6	OCTET STRING	read-create	The name of the port-channel interface.
TPR tpPortChannelStatus	1.3.6.1.4.1.11863.6.6.1.1.4.1.7	TPRowStatus	read-create	The following values are states: these values may be used as follow: active(1),if the entry is being used. notInService(2),destory the entry. notReady(3),destory the entry. createAndGo(4),not being used createAndWait(5),creat a new entry destroy(6),destory the entry.
tplinkIpAddrNotifications	1.3.6.1.4.1.11863.6.6.2

RFC description

VLAN interface IP address allocation, configuration modes, and layer 3 routing for TP-Link devices.

Start monitoring TP-LINK Layer 3 switching equipment (VLAN/loopback/routed-port IP addressing status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download TPLINK-IPADDR-MIB

What Is TPLINK-IPADDR-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description