All MIBs › TP5000E › tp5000eRefSelectionCriteria
tp5000eRefSelectionCriteria
Module: TP5000E
OID (symbolic): TP5000E::tp5000eRefSelectionCriteria
OID (numeric): 1.3.6.1.4.1.9070.1.2.5.7.1.7.2
Node type: OBJECT-TYPE
Type: TP5000REFSELECTMODE
Access: read-write
Description: Reference selection criteria applies to the entire TP5000E system, and it can be Priority based (2) or SSM based (3). Manual mode (1) is currently not supported. References are assigned priorities and PQL values, either by default or by user input. PQL values used to relate only to SSM values of E1/T1/SynE signals, but now PQL also covers time signals such as GNSS, GPS, and 1PPS+TOD. For a mapping for currently supported references, please see the user guide.
What is tp5000eRefSelectionCriteria?
tp5000eRefSelectionCriteria sets the system-wide reference-selection algorithm to Priority based(2) or SSM based(3) (Manual mode(1) is not currently supported); an admin picks Priority to force a preferred reference order or SSM to let the network's own quality-level signalling drive selection.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9070.1.2.5.7.1.7.2 snmpwalk -v2c -c public <target> TP5000E::tp5000eRefSelectionCriteria
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9070.1.2.5.7.1.7.2.1 snmpget -v2c -c public <target> TP5000E::tp5000eRefSelectionCriteria.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9070.1.2.5.7.1.7.2.1 s <value>
Start monitoring Symmetricom TP5000e timing/synchronization system (module warm-up/active-alarm status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TP5000E::tp5000eRefSelectionCriteria OID value, configure state conditions and alerts, and monitor any Symmetricom TP5000e timing/synchronization system (module warm-up/active-alarm status) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9070 | symmetricom | SYMM-COMMON-SMI |
| 1.3.6.1.4.1.9070.1 | symmNetworkManagement | SYMM-COMMON-SMI |
| 1.3.6.1.4.1.9070.1.2 | symmSnmpManagement | SYMM-COMMON-SMI |
| 1.3.6.1.4.1.9070.1.2.5 | symmCommonModelV1 | SYMM-COMMON-SMI |
| 1.3.6.1.4.1.9070.1.2.5.7 | symmDeviceDependent | SYMM-COMMON-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9070.1.2.5.7.1 | tp5000e | TP5000E |
| 1.3.6.1.4.1.9070.1.2.5.7.1.7 | tp5000eRefConfig | TP5000E |
| 1.3.6.1.4.1.9070.1.2.5.7.1.7.2 | tp5000eRefSelectionCriteria | TP5000E |