All MIBs › TP5000E › tp5000ePTPClientDataTableLock
tp5000ePTPClientDataTableLock
Module: TP5000E
OID (symbolic): TP5000E::tp5000ePTPClientDataTableLock
OID (numeric): 1.3.6.1.4.1.9070.1.2.5.7.1.4.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The ptpClientDataTableLock will control the internal semaphore to lock or unlock the ptpClientDataTable. The table must be locked before it can be read. When the ptpClientDataTable is locked, the data in the table will not change. The ptpClientDataTableLock can be set up to be locked or to be unlocked. When the locked signal is issued, the internal semaphore will be increased and start to lock the ptpClientDataTable. When the unlocked signal is issued, the internal semaphore will be decreased. When the semaphore reaches zero (0), the ptpClientDataTable will be unlocked.
What is tp5000ePTPClientDataTableLock?
tp5000ePTPClientDataTableLock is a semaphore an admin sets to locked(1) before reading tp5000eClientDataTable, freezing its contents so a poll doesn't see a table changing mid-read, and sets back to unlocked(0) afterward; the table only unlocks once every lock request has been matched by an unlock.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9070.1.2.5.7.1.4.3 snmpwalk -v2c -c public <target> TP5000E::tp5000ePTPClientDataTableLock
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9070.1.2.5.7.1.4.3.1 snmpget -v2c -c public <target> TP5000E::tp5000ePTPClientDataTableLock.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9070.1.2.5.7.1.4.3.1 i <value>
Start monitoring Symmetricom TP5000e timing/synchronization system (module warm-up/active-alarm status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TP5000E::tp5000ePTPClientDataTableLock OID value, configure state conditions and alerts, and monitor any Symmetricom TP5000e timing/synchronization system (module warm-up/active-alarm status) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9070 | symmetricom | SYMM-COMMON-SMI |
| 1.3.6.1.4.1.9070.1 | symmNetworkManagement | SYMM-COMMON-SMI |
| 1.3.6.1.4.1.9070.1.2 | symmSnmpManagement | SYMM-COMMON-SMI |
| 1.3.6.1.4.1.9070.1.2.5 | symmCommonModelV1 | SYMM-COMMON-SMI |
| 1.3.6.1.4.1.9070.1.2.5.7 | symmDeviceDependent | SYMM-COMMON-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9070.1.2.5.7.1 | tp5000e | TP5000E |
| 1.3.6.1.4.1.9070.1.2.5.7.1.4 | tp5000eGlobalService | TP5000E |
| 1.3.6.1.4.1.9070.1.2.5.7.1.4.3 | tp5000ePTPClientDataTableLock | TP5000E |