TP5000E :: tp5000eLedID

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › TP5000E › tp5000eLedID

tp5000eLedID

Module: TP5000E

OID (symbolic): TP5000E::tp5000eLedID

OID (numeric): 1.3.6.1.4.1.9070.1.2.5.7.1.1.1.1.1

Node type: OBJECT-TYPE

Type: TP5000LEDID

Access: read-only

Description: LED ID are LED names on the module front panel. Currently, the TP5000E system has 14 unique LED names. Some LED names (ALM and MGMT) are used on different module types.

IMC LEDs: 1) BT A (battery terminal A-bus power) 2) BT B (battery terminal B-bus power) 3) SYS (system health) 4) ALM (IMC alarm) 5) GNSS/GPS (GNSS/GPS status) 6) MGMT (Ethernet management port)

IOC LEDs: 7) ACT (active IOC) 8) Alarm (IOC alarm) 9) ETH1 (Ethernet port 1) 10) ETH2 (Ethernet port 2) 11) Holdover (IOC oscillator status)

Expansion shelf LEDs: 13) PWR A (A-bus power) 14) PWR B (B-bus power) 4) ALM (expansion shelf alarm) 6) MGMT (Ethernet management port) 12) REF (reference tracking status)

What is tp5000eLedID?

tp5000eLedID identifies which physical front-panel LED (e.g. BT A/BT B battery power, SYS health, ALM alarm, GNSS/GPS status, MGMT Ethernet, ACT, ETH1/ETH2, Holdover, REF, or PWR A/PWR B) a given row of the LED status table refers to; the same LED name can appear on different module types (IMC, IOC, or expansion shelf).

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9070.1.2.5.7.1.1.1.1.1
snmpwalk -v2c -c public <target> TP5000E::tp5000eLedID

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9070.1.2.5.7.1.1.1.1.1.1
snmpget -v2c -c public <target> TP5000E::tp5000eLedID.1

Start monitoring Symmetricom TP5000e timing/synchronization system (module warm-up/active-alarm status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TP5000E::tp5000eLedID OID value, configure state conditions and alerts, and monitor any Symmetricom TP5000e timing/synchronization system (module warm-up/active-alarm status) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9070symmetricomSYMM-COMMON-SMI
1.3.6.1.4.1.9070.1symmNetworkManagementSYMM-COMMON-SMI
1.3.6.1.4.1.9070.1.2symmSnmpManagementSYMM-COMMON-SMI
1.3.6.1.4.1.9070.1.2.5symmCommonModelV1SYMM-COMMON-SMI
1.3.6.1.4.1.9070.1.2.5.7symmDeviceDependentSYMM-COMMON-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9070.1.2.5.7.1tp5000eTP5000E
1.3.6.1.4.1.9070.1.2.5.7.1.1tp5000eSystemStatusTP5000E
1.3.6.1.4.1.9070.1.2.5.7.1.1.1tp5000eLedTableTP5000E
1.3.6.1.4.1.9070.1.2.5.7.1.1.1.1tp5000eLedEntryTP5000E
1.3.6.1.4.1.9070.1.2.5.7.1.1.1.1.1tp5000eLedIDTP5000E