TP5000E :: tp5000eFixedVlanId

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › TP5000E › tp5000eFixedVlanId

tp5000eFixedVlanId

Module: TP5000E

OID (symbolic): TP5000E::tp5000eFixedVlanId

OID (numeric): 1.3.6.1.4.1.9070.1.2.5.7.1.10.2.1.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The VLAN ID of the current VLAN interface. The range is 0~4094. If a VLAN ID is set to 0, the associated VLAN interface of this VLAN index will be removed from the internal VLAN table. The default VLAN ID of each VLAN interface in the VLAN table is 0. The VLAN ID can be setup only once. The VLAN ID and VLAN Priority must be configured at same time when a VLAN interface row is added. Once a VLAN ID is defined, it cannot be modified. To change it, set the VLAN ID to 0 (deleting the VLAN from the VLAN table) and create a new VLAN row.

What is tp5000eFixedVlanId?

tp5000eFixedVlanId sets the 802.1Q VLAN ID (0-4094) for a fixed VLAN interface; like its non-fixed counterpart it can only be set once — set it to 0 to remove the interface's VLAN association and create a new row to assign a different ID.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9070.1.2.5.7.1.10.2.1.2
snmpwalk -v2c -c public <target> TP5000E::tp5000eFixedVlanId

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9070.1.2.5.7.1.10.2.1.2.1
snmpget -v2c -c public <target> TP5000E::tp5000eFixedVlanId.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9070.1.2.5.7.1.10.2.1.2.1 i <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> tp5000eFixedVlanId.1

Start monitoring Symmetricom TP5000e timing/synchronization system (module warm-up/active-alarm status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TP5000E::tp5000eFixedVlanId OID value, configure state conditions and alerts, and monitor any Symmetricom TP5000e timing/synchronization system (module warm-up/active-alarm status) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9070symmetricomSYMM-COMMON-SMI
1.3.6.1.4.1.9070.1symmNetworkManagementSYMM-COMMON-SMI
1.3.6.1.4.1.9070.1.2symmSnmpManagementSYMM-COMMON-SMI
1.3.6.1.4.1.9070.1.2.5symmCommonModelV1SYMM-COMMON-SMI
1.3.6.1.4.1.9070.1.2.5.7symmDeviceDependentSYMM-COMMON-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9070.1.2.5.7.1tp5000eTP5000E
1.3.6.1.4.1.9070.1.2.5.7.1.10tp5000eVlanConfigTP5000E
1.3.6.1.4.1.9070.1.2.5.7.1.10.2tp5000eFixedVlanTableTP5000E
1.3.6.1.4.1.9070.1.2.5.7.1.10.2.1tp5000eFixedVlanEntryTP5000E
1.3.6.1.4.1.9070.1.2.5.7.1.10.2.1.2tp5000eFixedVlanIdTP5000E