TP5000E :: tp5000eEntPhysicalPartIndex

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › TP5000E › tp5000eEntPhysicalPartIndex

tp5000eEntPhysicalPartIndex

Module: TP5000E

OID (symbolic): TP5000E::tp5000eEntPhysicalPartIndex

OID (numeric): 1.3.6.1.4.1.9070.1.2.5.7.1.9.2.1.5

Node type: OBJECT-TYPE

Type: Integer32

Access: read-only

Description: Part number index uniquely identifies the connector configuration of a given module type. Currently, there are four versions of IMC, and the valid part number index value for IMC are IMC-1 (1), IMC-2 (2), IMC-3 (3), and IMC-4 (4). IOC only has two versions (Rb or Qz), and the valid part number index values for IOC are IOC-Rb (1) and IOC-Qz (2). There are four versions of I/O module, and therefore the range of the I/O module part number index is {1... 4}. Each type of expansion shelf currently does not have multiple versions, so their valid part number index value is only 1 at this time.

What is tp5000eEntPhysicalPartIndex?

tp5000eEntPhysicalPartIndex identifies the specific hardware variant of a module, e.g. IMC-1 through IMC-4 for the four IMC versions, or IOC-Rb(1)/IOC-Qz(2) for the two oscillator types of IOC, letting an admin tell exactly which board variant is installed.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9070.1.2.5.7.1.9.2.1.5
snmpwalk -v2c -c public <target> TP5000E::tp5000eEntPhysicalPartIndex

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9070.1.2.5.7.1.9.2.1.5.1
snmpget -v2c -c public <target> TP5000E::tp5000eEntPhysicalPartIndex.1

Start monitoring Symmetricom TP5000e timing/synchronization system (module warm-up/active-alarm status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TP5000E::tp5000eEntPhysicalPartIndex OID value, configure state conditions and alerts, and monitor any Symmetricom TP5000e timing/synchronization system (module warm-up/active-alarm status) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9070symmetricomSYMM-COMMON-SMI
1.3.6.1.4.1.9070.1symmNetworkManagementSYMM-COMMON-SMI
1.3.6.1.4.1.9070.1.2symmSnmpManagementSYMM-COMMON-SMI
1.3.6.1.4.1.9070.1.2.5symmCommonModelV1SYMM-COMMON-SMI
1.3.6.1.4.1.9070.1.2.5.7symmDeviceDependentSYMM-COMMON-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9070.1.2.5.7.1tp5000eTP5000E
1.3.6.1.4.1.9070.1.2.5.7.1.9tp5000eHardwareHierarchyTP5000E
1.3.6.1.4.1.9070.1.2.5.7.1.9.2tp5000eEntPhysicalTableTP5000E
1.3.6.1.4.1.9070.1.2.5.7.1.9.2.1tp5000eEntPhysicalEntryTP5000E
1.3.6.1.4.1.9070.1.2.5.7.1.9.2.1.5tp5000eEntPhysicalPartIndexTP5000E