All MIBs › TP5000E › snmpIPv4IPv6ManagerRowStatus
snmpIPv4IPv6ManagerRowStatus
Module: TP5000E
OID (symbolic): TP5000E::snmpIPv4IPv6ManagerRowStatus
OID (numeric): 1.3.6.1.4.1.9070.1.2.5.7.1.12.1.1.5
Node type: OBJECT-TYPE
Type: RowStatus
Access: read-write
Description: The row status of SNMP manager table to control row actions. It has the following actions:
The status column has six defined values:
- `active(1)', which indicates that the conceptual row is available for use by the managed device;
- `notInService(2)', which indicates that the conceptual row exists in the agent, but is unavailable for use by the managed device (see NOTE below);
- `notReady(3)', which indicates that the conceptual row exists in the agent, but is missing information necessary in order to be available for use by the managed device;
- `createAndGo(4)', which is supplied by a management station wishing to create a new instance of a conceptual row and to have its status automatically set to active, making it available for use by the managed device;
- `createAndWait(5)', which is supplied by a management station wishing to create a new instance of a conceptual row (but not make it available for use by the managed device); and,
- `destroy(6)', which is supplied by a management station wishing to delete all of the instances associated with an existing conceptual row.
What is snmpIPv4IPv6ManagerRowStatus?
snmpIPv4IPv6ManagerRowStatus is the standard RowStatus controlling an SNMP manager row's lifecycle: active(1) once configured, createAndGo(4)/createAndWait(5) to add a new manager entry, and destroy(6) to remove one.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9070.1.2.5.7.1.12.1.1.5 snmpwalk -v2c -c public <target> TP5000E::snmpIPv4IPv6ManagerRowStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9070.1.2.5.7.1.12.1.1.5.1 snmpget -v2c -c public <target> TP5000E::snmpIPv4IPv6ManagerRowStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9070.1.2.5.7.1.12.1.1.5.1 s <value>
Start monitoring Symmetricom TP5000e timing/synchronization system (module warm-up/active-alarm status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TP5000E::snmpIPv4IPv6ManagerRowStatus OID value, configure state conditions and alerts, and monitor any Symmetricom TP5000e timing/synchronization system (module warm-up/active-alarm status) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9070 | symmetricom | SYMM-COMMON-SMI |
| 1.3.6.1.4.1.9070.1 | symmNetworkManagement | SYMM-COMMON-SMI |
| 1.3.6.1.4.1.9070.1.2 | symmSnmpManagement | SYMM-COMMON-SMI |
| 1.3.6.1.4.1.9070.1.2.5 | symmCommonModelV1 | SYMM-COMMON-SMI |
| 1.3.6.1.4.1.9070.1.2.5.7 | symmDeviceDependent | SYMM-COMMON-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9070.1.2.5.7.1 | tp5000e | TP5000E |
| 1.3.6.1.4.1.9070.1.2.5.7.1.12 | tp5000eIPv6GlobalConfig | TP5000E |
| 1.3.6.1.4.1.9070.1.2.5.7.1.12.1 | snmpIPv4IPv6ManagerTable | TP5000E |
| 1.3.6.1.4.1.9070.1.2.5.7.1.12.1.1 | snmpIPv4IPv6ManagerEntry | TP5000E |
| 1.3.6.1.4.1.9070.1.2.5.7.1.12.1.1.5 | snmpIPv4IPv6ManagerRowStatus | TP5000E |