TOS-IV

All MIBs › TOS-IV

Organization: TOPSEC

Last Updated: 1970--0-1-

Description: MIB for IPsec VPN tunnel table information and status on Beijing Topsec network security appliances

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is TOS-IV?

This is a Beijing Topsec MIB for their network security appliances (firewalls/UTM devices), specifically modeling IPsec VPN tunnel information in a conceptual table. It exposes IPsec tunnel-related status objects, per the module's own description of "a conceptual table containing TOS IV information," though the specific object names were not available in this sample. It is intended for monitoring the software/security status of VPN tunnels on the appliance, such as tunnel establishment/operational state, which reveals whether a site-to-site or remote-access IPsec connection is currently up or has failed. No explicit dependency on other standard MIBs is evident from the available description. It is typically deployed on Topsec firewall/VPN gateway appliances in enterprise or service-provider security infrastructure where IPsec tunnel status needs to be tracked via SNMP. Engineers can download the TOS-IV file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in TOS-IV. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Beijing Topsec firewall/VPN security appliances

Monitoring Examples

An admin would poll the module's IPsec tunnel table (as described, "the conceptual table containing TOS IV information") to check the status of active IPsec tunnels; a tunnel entry unexpectedly disappearing or reporting a down state would indicate a dropped VPN connection needing investigation. Because no specific object names were included in the available sample data, exact OID-level detail cannot be given honestly beyond what the module description states. This limits the specificity of any monitoring scenario until the raw MIB source is consulted directly.

What Can Be Monitored

IPsec VPN tunnel status/state

Imported Objects

From RFC1155-SMI

Counter

From SNMPv2-SMI

Gauge
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Opaque

From SNMPv2-TC

DateAndTime
DisplayString
TEXTUAL-CONVENTION

From TOS-SMI

tosMib

OBJECT-IDENTITY

How to Use in IPNetwork Monitor

Example using ivInfoOutPkts OID:

Select a Beijing Topsec firewall or VPN security appliance as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type ivInfoOutPkts into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The total tx packet of the whole iv tunnels . On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
tosIvTable	1.3.6.1.4.1.14331.5.5.1.12			The (conceptual) table containing TOS IV information.
tosIvTunTable	1.3.6.1.4.1.14331.5.5.1.12.1		not-accessible	The (conceptiual) talbe containing TOS IV tunnel information.
tosIvTunEntry	1.3.6.1.4.1.14331.5.5.1.12.1.1		not-accessible	An entry (conceptual row) containing the information on IV.
INT ivTunnelIndex	1.3.6.1.4.1.14331.5.5.1.12.1.1.1	INTEGER	read-only	The Index of the IV table .
STR ivTunnelName	1.3.6.1.4.1.14331.5.5.1.12.1.1.2	DisplayString	read-only	The Name of the IV tunnel .
STR ivLcoalInterface	1.3.6.1.4.1.14331.5.5.1.12.1.1.3	DisplayString	read-only	The Local Interface name
IP ivLocalProtectNet	1.3.6.1.4.1.14331.5.5.1.12.1.1.4	IpAddress	read-only	The Local protected Net IP address.
IP ivLocalNetMask	1.3.6.1.4.1.14331.5.5.1.12.1.1.5	IpAddress	read-only	The Local Netmask IP address.
STR ivRemoteDomainName	1.3.6.1.4.1.14331.5.5.1.12.1.1.6	DisplayString	read-only	The Remote gateway name.
STR ivRemoteIpAddr	1.3.6.1.4.1.14331.5.5.1.12.1.1.7	DisplayString	read-only	The Remote gateway ip address.
IP ivRemoteProtectNet	1.3.6.1.4.1.14331.5.5.1.12.1.1.8	IpAddress	read-only	The Remote Net IP address.
IP ivRemoteNetMask	1.3.6.1.4.1.14331.5.5.1.12.1.1.9	IpAddress	read-only	The Remote Net IP mask.
STR ivTunnelStatus	1.3.6.1.4.1.14331.5.5.1.12.1.1.10	DisplayString	read-only	The IV tunnel status.
tosIvVrcTable	1.3.6.1.4.1.14331.5.5.1.12.2		not-accessible	The (conceptiual) talbe containing TOS IV VRC user information.
tosIvVrcEntry	1.3.6.1.4.1.14331.5.5.1.12.2.1		not-accessible	An entry (conceptual row) containing the information on tos IV VRC.
INT ivVrcIndex	1.3.6.1.4.1.14331.5.5.1.12.2.1.1	INTEGER	read-only	The Index of the IV VRC table .
STR ivVrcUserName	1.3.6.1.4.1.14331.5.5.1.12.2.1.2	DisplayString	read-only	The VRC user's name .
STR ivVrcTunnelStatus	1.3.6.1.4.1.14331.5.5.1.12.2.1.3	DisplayString	read-only	the VRC tunnel statu .
IP ivVrcVirtualIpAddr	1.3.6.1.4.1.14331.5.5.1.12.2.1.4	IpAddress	read-only	The VRC virtual IP address
IP ivVrcConnectIpAddr	1.3.6.1.4.1.14331.5.5.1.12.2.1.5	IpAddress	read-only	The connect ip address
DAT ivVrcLogTime	1.3.6.1.4.1.14331.5.5.1.12.2.1.6	DateAndTime	read-only	The time since log in
tosIvInfoTable	1.3.6.1.4.1.14331.5.5.1.12.3		not-accessible	The (conceptiual) talbe containing TOS IV information.
tosIvInfoEntry	1.3.6.1.4.1.14331.5.5.1.12.3.1		not-accessible	An entry (conceptual row) containing the information on tos IV VRC.
INT ivInfoTunnelNumber	1.3.6.1.4.1.14331.5.5.1.12.3.1.1	INTEGER	read-only	The tunnel number of the iv .
CTR ivInfoOutPktsEx	1.3.6.1.4.1.14331.5.5.1.12.3.1.2	Counter	read-only	The total tx packet of the whole iv tunnels .
CTR ivInfoOutDrops	1.3.6.1.4.1.14331.5.5.1.12.3.1.3	Counter	read-only	The total tx packets which are dropped of the whole iv tunnels
CTR ivInfoOutErrors	1.3.6.1.4.1.14331.5.5.1.12.3.1.4	Counter	read-only	The total tx packets which have error of the iv tnuuels
CTR ivInfoOutOctets	1.3.6.1.4.1.14331.5.5.1.12.3.1.5	Counter	read-only	The total tx octets of the whole iv tunnels
CTR ivInfoInPkts	1.3.6.1.4.1.14331.5.5.1.12.3.1.6	Counter	read-only	The total rx packets of the whole iv tunnels
CTR ivInfoInDrops	1.3.6.1.4.1.14331.5.5.1.12.3.1.7	Counter	read-only	The total rx octets which are dropped of the whole iv tunnels
CTR ivInfoInErrors	1.3.6.1.4.1.14331.5.5.1.12.3.1.8	Counter	read-only	The total rx packets which have error of the iv tnuuels
CTR ivInfoInOctets	1.3.6.1.4.1.14331.5.5.1.12.3.1.9	Counter	read-only	The total rx octets of the whole iv tunnels

RFC description

Manages Topsec TOS IV secure tunnel configurations and VPN operations for network security applications.

Start monitoring Beijing Topsec firewall/VPN security appliances (IPsec tunnel establishment/operational status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download TOS-IV